diff options
Diffstat (limited to 'gnuradio-examples/python/hier/digital/transmit_path.py')
| -rw-r--r-- | gnuradio-examples/python/hier/digital/transmit_path.py | 229 |
1 files changed, 0 insertions, 229 deletions
diff --git a/gnuradio-examples/python/hier/digital/transmit_path.py b/gnuradio-examples/python/hier/digital/transmit_path.py deleted file mode 100644 index 18fecd3d5b..0000000000 --- a/gnuradio-examples/python/hier/digital/transmit_path.py +++ /dev/null @@ -1,229 +0,0 @@ -# -# Copyright 2005,2006,2007 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. -# - -from gnuradio import gr, gru, blks2 -from gnuradio import usrp -from gnuradio import eng_notation - -import copy -import sys - -# from current dir -from pick_bitrate import pick_tx_bitrate - -# ///////////////////////////////////////////////////////////////////////////// -# transmit path -# ///////////////////////////////////////////////////////////////////////////// - -class transmit_path(gr.top_block): - def __init__(self, modulator_class, options): - ''' - See below for what options should hold - ''' - - gr.top_block.__init__(self, "transmit_path") - options = copy.copy(options) # make a copy so we can destructively modify - - self._verbose = options.verbose - self._tx_freq = options.tx_freq # tranmitter's center frequency - self._tx_amplitude = options.tx_amplitude # digital amplitude sent to USRP - self._tx_subdev_spec = options.tx_subdev_spec # daughterboard to use - self._bitrate = options.bitrate # desired bit rate - self._interp = options.interp # interpolating rate for the USRP (prelim) - self._samples_per_symbol = options.samples_per_symbol # desired samples/baud - self._fusb_block_size = options.fusb_block_size # usb info for USRP - self._fusb_nblocks = options.fusb_nblocks # usb info for USRP - - self._modulator_class = modulator_class # the modulator_class we are using - - if self._tx_freq is None: - sys.stderr.write("-f FREQ or --freq FREQ or --tx-freq FREQ must be specified\n") - raise SystemExit - - # Set up USRP sink; also adjusts interp, samples_per_symbol, and bitrate - self._setup_usrp_sink() - - # copy the final answers back into options for use by modulator - options.samples_per_symbol = self._samples_per_symbol - options.bitrate = self._bitrate - options.interp = self._interp - - # Get mod_kwargs - mod_kwargs = self._modulator_class.extract_kwargs_from_options(options) - - # Set center frequency of USRP - ok = self.set_freq(self._tx_freq) - if not ok: - print "Failed to set Tx frequency to %s" % (eng_notation.num_to_str(self._tx_freq),) - raise ValueError - - # transmitter - self.packet_transmitter = \ - blks2.mod_pkts(self._modulator_class(**mod_kwargs), - access_code=None, - msgq_limit=4, - pad_for_usrp=True) - - # Set the USRP for maximum transmit gain - # (Note that on the RFX cards this is a nop.) - self.set_gain(self.subdev.gain_range()[0]) - - self.amp = gr.multiply_const_cc(1) - self.set_tx_amplitude(self._tx_amplitude) - - # enable Auto Transmit/Receive switching - self.set_auto_tr(True) - - # Display some information about the setup - if self._verbose: - self._print_verbage() - - self.connect(self.packet_transmitter, self.amp, self.u) - - def _setup_usrp_sink(self): - """ - Creates a USRP sink, determines the settings for best bitrate, - and attaches to the transmitter's subdevice. - """ - self.u = usrp.sink_c(fusb_block_size=self._fusb_block_size, - fusb_nblocks=self._fusb_nblocks) - dac_rate = self.u.dac_rate(); - - # derive values of bitrate, samples_per_symbol, and interp from desired info - (self._bitrate, self._samples_per_symbol, self._interp) = \ - pick_tx_bitrate(self._bitrate, self._modulator_class.bits_per_symbol(), - self._samples_per_symbol, self._interp, dac_rate) - - self.u.set_interp_rate(self._interp) - - # determine the daughterboard subdevice we're using - if self._tx_subdev_spec is None: - self._tx_subdev_spec = usrp.pick_tx_subdevice(self.u) - self.u.set_mux(usrp.determine_tx_mux_value(self.u, self._tx_subdev_spec)) - self.subdev = usrp.selected_subdev(self.u, self._tx_subdev_spec) - - - def set_freq(self, target_freq): - """ - Set the center frequency we're interested in. - - @param target_freq: frequency in Hz - @rypte: bool - - Tuning is a two step process. First we ask the front-end to - tune as close to the desired frequency as it can. Then we use - the result of that operation and our target_frequency to - determine the value for the digital up converter. - """ - r = self.u.tune(self.subdev._which, self.subdev, target_freq) - if r: - return True - - return False - - def set_gain(self, gain): - """ - Sets the analog gain in the USRP - """ - self.gain = gain - self.subdev.set_gain(gain) - - def set_tx_amplitude(self, ampl): - """ - Sets the transmit amplitude sent to the USRP - @param: ampl 0 <= ampl < 32768. Try 8000 - """ - self._tx_amplitude = max(0.0, min(ampl, 32767.0)) - self.amp.set_k(self._tx_amplitude) - - def set_auto_tr(self, enable): - """ - Turns on auto transmit/receive of USRP daughterboard (if exits; else ignored) - """ - return self.subdev.set_auto_tr(enable) - - def send_pkt(self, payload='', eof=False): - """ - Calls the transmitter method to send a packet - """ - return self.packet_transmitter.send_pkt(payload, eof) - - def bitrate(self): - return self._bitrate - - def samples_per_symbol(self): - return self._samples_per_symbol - - def interp(self): - return self._interp - - def add_options(normal, expert): - """ - Adds transmitter-specific options to the Options Parser - """ - add_freq_option(normal) - if not normal.has_option('--bitrate'): - normal.add_option("-r", "--bitrate", type="eng_float", default=None, - help="specify bitrate. samples-per-symbol and interp/decim will be derived.") - normal.add_option("-T", "--tx-subdev-spec", type="subdev", default=None, - help="select USRP Tx side A or B") - normal.add_option("", "--tx-amplitude", type="eng_float", default=12000, metavar="AMPL", - help="set transmitter digital amplitude: 0 <= AMPL < 32768 [default=%default]") - normal.add_option("-v", "--verbose", action="store_true", default=False) - - expert.add_option("-S", "--samples-per-symbol", type="int", default=None, - help="set samples/symbol [default=%default]") - expert.add_option("", "--tx-freq", type="eng_float", default=None, - help="set transmit frequency to FREQ [default=%default]", metavar="FREQ") - expert.add_option("-i", "--interp", type="intx", default=None, - help="set fpga interpolation rate to INTERP [default=%default]") - expert.add_option("", "--log", action="store_true", default=False, - help="Log all parts of flow graph to file (CAUTION: lots of data)") - - # Make a static method to call before instantiation - add_options = staticmethod(add_options) - - def _print_verbage(self): - """ - Prints information about the transmit path - """ - print "Using TX d'board %s" % (self.subdev.side_and_name(),) - print "Tx amplitude %s" % (self._tx_amplitude) - print "modulation: %s" % (self._modulator_class.__name__) - print "bitrate: %sb/s" % (eng_notation.num_to_str(self._bitrate)) - print "samples/symbol: %3d" % (self._samples_per_symbol) - print "interp: %3d" % (self._interp) - print "Tx Frequency: %s" % (eng_notation.num_to_str(self._tx_freq)) - - -def add_freq_option(parser): - """ - Hackery that has the -f / --freq option set both tx_freq and rx_freq - """ - def freq_callback(option, opt_str, value, parser): - parser.values.rx_freq = value - parser.values.tx_freq = value - - if not parser.has_option('--freq'): - parser.add_option('-f', '--freq', type="eng_float", - action="callback", callback=freq_callback, - help="set Tx and/or Rx frequency to FREQ [default=%default]", - metavar="FREQ") |