#include <gnuradio/uhd/usrp_source.h>

Public Types
typedef std::shared_ptr< usrp_source >	sptr

Public Types inherited from gr::block
enum	work_return_t { WORK_CALLED_PRODUCE = -2 , WORK_DONE = -1 }
	Magic return values from general_work. More...

enum	tag_propagation_policy_t { TPP_DONT = 0 , TPP_ALL_TO_ALL = 1 , TPP_ONE_TO_ONE = 2 , TPP_CUSTOM = 3 }
	enum to represent different tag propagation policies. More...

Public Member Functions
virtual void	set_start_time (const ::uhd::time_spec_t &time)=0

virtual void	issue_stream_cmd (const ::uhd::stream_cmd_t &cmd)=0

virtual void	set_recv_timeout (const double timeout, const bool one_packet=true)=0

virtual std::vector< std::string >	get_lo_names (size_t chan=0)=0

virtual void	set_lo_source (const std::string &src, const std::string &name, size_t chan=0)=0

virtual const std::string	get_lo_source (const std::string &name, size_t chan=0)=0

virtual std::vector< std::string >	get_lo_sources (const std::string &name, size_t chan=0)=0

virtual void	set_lo_export_enabled (bool enabled, const std::string &name, size_t chan=0)=0

virtual bool	get_lo_export_enabled (const std::string &name, size_t chan=0)=0

virtual double	set_lo_freq (double freq, const std::string &name, size_t chan=0)=0

virtual double	get_lo_freq (const std::string &name, size_t chan=0)=0

virtual ::uhd::freq_range_t	get_lo_freq_range (const std::string &name, size_t chan=0)=0

virtual void	set_auto_dc_offset (const bool enb, size_t chan=0)=0

virtual void	set_dc_offset (const std::complex< double > &offset, size_t chan=0)=0

virtual void	set_auto_iq_balance (const bool enb, size_t chan=0)=0

virtual void	set_iq_balance (const std::complex< double > &correction, size_t chan=0)=0

virtual void	set_rx_agc (const bool enable, size_t chan=0)=0

virtual std::vector< std::complex< float > >	finite_acquisition (const size_t nsamps)=0

virtual std::vector< std::vector< std::complex< float > > >	finite_acquisition_v (const size_t nsamps)=0

Public Member Functions inherited from gr::uhd::usrp_block
virtual void	set_subdev_spec (const std::string &spec, size_t mboard=0)=0

virtual std::string	get_subdev_spec (size_t mboard=0)=0

virtual size_t	get_num_mboards ()=0

virtual void	set_samp_rate (double rate)=0

virtual double	get_samp_rate (void)=0

virtual ::uhd::meta_range_t	get_samp_rates (void)=0

virtual ::uhd::tune_result_t	set_center_freq (const ::uhd::tune_request_t tune_request, size_t chan=0)=0

::uhd::tune_result_t	set_center_freq (double freq, size_t chan=0)

virtual double	get_center_freq (size_t chan=0)=0

virtual ::uhd::freq_range_t	get_freq_range (size_t chan=0)=0

virtual void	set_gain (double gain, size_t chan=0, pmt::pmt_t direction=pmt::PMT_NIL)=0

virtual void	set_gain (double gain, const std::string &name, size_t chan=0)=0

virtual void	set_normalized_gain (double norm_gain, size_t chan=0)=0

virtual double	get_gain (size_t chan=0)=0

virtual double	get_gain (const std::string &name, size_t chan=0)=0

virtual double	get_normalized_gain (size_t chan=0)=0

virtual std::vector< std::string >	get_gain_names (size_t chan=0)=0

virtual ::uhd::gain_range_t	get_gain_range (size_t chan=0)=0

virtual ::uhd::gain_range_t	get_gain_range (const std::string &name, size_t chan=0)=0

virtual bool	has_power_reference (size_t chan=0)=0

virtual void	set_power_reference (double power_dbm, size_t chan=0)=0

virtual double	get_power_reference (size_t chan=0)=0

virtual ::uhd::meta_range_t	get_power_range (size_t chan=0)=0

virtual void	set_antenna (const std::string &ant, size_t chan=0)=0

virtual std::string	get_antenna (size_t chan=0)=0

virtual std::vector< std::string >	get_antennas (size_t chan=0)=0

virtual void	set_bandwidth (double bandwidth, size_t chan=0)=0

virtual double	get_bandwidth (size_t chan=0)=0

virtual ::uhd::freq_range_t	get_bandwidth_range (size_t chan=0)=0

virtual ::uhd::sensor_value_t	get_sensor (const std::string &name, size_t chan=0)=0

virtual std::vector< std::string >	get_sensor_names (size_t chan=0)=0

::uhd::sensor_value_t	get_dboard_sensor (const std::string &name, size_t chan=0)
	DEPRECATED use get_sensor. More...

std::vector< std::string >	get_dboard_sensor_names (size_t chan=0)
	DEPRECATED use get_sensor_names. More...

virtual ::uhd::sensor_value_t	get_mboard_sensor (const std::string &name, size_t mboard=0)=0

virtual std::vector< std::string >	get_mboard_sensor_names (size_t mboard=0)=0

virtual std::string	get_time_source (const size_t mboard)=0

virtual std::vector< std::string >	get_time_sources (const size_t mboard)=0

virtual void	set_clock_source (const std::string &source, const size_t mboard=0)=0

virtual std::string	get_clock_source (const size_t mboard)=0

virtual std::vector< std::string >	get_clock_sources (const size_t mboard)=0

virtual double	get_clock_rate (size_t mboard=0)=0

virtual void	set_clock_rate (double rate, size_t mboard=0)=0

virtual ::uhd::time_spec_t	get_time_now (size_t mboard=0)=0

virtual ::uhd::time_spec_t	get_time_last_pps (size_t mboard=0)=0

virtual void	set_time_now (const ::uhd::time_spec_t &time_spec, size_t mboard=0)=0

virtual void	set_time_next_pps (const ::uhd::time_spec_t &time_spec)=0

virtual void	set_time_unknown_pps (const ::uhd::time_spec_t &time_spec)=0

virtual void	set_command_time (const ::uhd::time_spec_t &time_spec, size_t mboard=0)=0

virtual void	clear_command_time (size_t mboard=0)=0

virtual ::uhd::usrp::dboard_iface::sptr	get_dboard_iface (size_t chan=0)=0

virtual ::uhd::usrp::multi_usrp::sptr	get_device (void)=0

virtual void	set_user_register (const uint8_t addr, const uint32_t data, size_t mboard=0)=0

virtual void	set_time_source (const std::string &source, const size_t mboard=0)=0

virtual void	set_stream_args (const ::uhd::stream_args_t &stream_args)=0

virtual std::vector< std::string >	get_gpio_banks (const size_t mboard)=0

virtual void	set_gpio_attr (const std::string &bank, const std::string &attr, const uint32_t value, const uint32_t mask=0xffffffff, const size_t mboard=0)=0

virtual uint32_t	get_gpio_attr (const std::string &bank, const std::string &attr, const size_t mboard=0)=0

virtual std::vector< std::string >	get_filter_names (const size_t chan=0)=0

virtual void	set_filter (const std::string &path, ::uhd::filter_info_base::sptr filter, const size_t chan=0)=0

virtual ::uhd::filter_info_base::sptr	get_filter (const std::string &path, const size_t chan=0)=0

virtual ::uhd::dict< std::string, std::string >	get_usrp_info (size_t chan=0)=0

Public Member Functions inherited from gr::sync_block
virtual int	work (int noutput_items, gr_vector_const_void_star &input_items, gr_vector_void_star &output_items)=0
	just like gr::block::general_work, only this arranges to call consume_each for you More...

void	forecast (int noutput_items, gr_vector_int &ninput_items_required) override
	Estimate input requirements given output request. More...

int	general_work (int noutput_items, gr_vector_int &ninput_items, gr_vector_const_void_star &input_items, gr_vector_void_star &output_items) override
	compute output items from input items More...

int	fixed_rate_ninput_to_noutput (int ninput) override
	Given ninput samples, return number of output samples that will be produced. N.B. this is only defined if fixed_rate returns true. Generally speaking, you don't need to override this. More...

int	fixed_rate_noutput_to_ninput (int noutput) override
	Given noutput samples, return number of input samples required to produce noutput. N.B. this is only defined if fixed_rate returns true. Generally speaking, you don't need to override this. More...

Public Member Functions inherited from gr::block
	~block () override

unsigned	history () const

void	set_history (unsigned history)

void	declare_sample_delay (int which, unsigned delay)

void	declare_sample_delay (unsigned delay)

unsigned	sample_delay (int which) const

bool	fixed_rate () const
	Return true if this block has a fixed input to output rate. More...

virtual bool	start ()
	Called to enable drivers, etc for i/o devices. More...

virtual bool	stop ()
	Called to disable drivers, etc for i/o devices. More...

void	set_output_multiple (int multiple)
	Constrain the noutput_items argument passed to forecast and general_work. More...

int	output_multiple () const

bool	output_multiple_set () const

void	set_alignment (int multiple)
	Constrains buffers to work on a set item alignment (for SIMD) More...

int	alignment () const

void	set_unaligned (int na)

int	unaligned () const

void	set_is_unaligned (bool u)

bool	is_unaligned () const

void	consume (int which_input, int how_many_items)
	Tell the scheduler `how_many_items` of input stream `which_input` were consumed. More...

void	consume_each (int how_many_items)
	Tell the scheduler `how_many_items` were consumed on each input stream. More...

void	produce (int which_output, int how_many_items)
	Tell the scheduler `how_many_items` were produced on output stream `which_output`. More...

void	set_relative_rate (double relative_rate)
	Set the approximate output rate / input rate. More...

void	set_inverse_relative_rate (double inverse_relative_rate)
	Set the approximate output rate / input rate using its reciprocal. More...

void	set_relative_rate (uint64_t interpolation, uint64_t decimation)
	Set the approximate output rate / input rate as an integer ratio. More...

double	relative_rate () const
	return the approximate output rate / input rate More...

uint64_t	relative_rate_i () const
	return the numerator, or interpolation rate, of the approximate output rate / input rate More...

uint64_t	relative_rate_d () const
	return the denominator, or decimation rate, of the approximate output rate / input rate More...

mpq_class &	mp_relative_rate ()
	return a reference to the multiple precision rational representation of the approximate output rate / input rate More...

uint64_t	nitems_read (unsigned int which_input)
	Return the number of items read on input stream which_input. More...

uint64_t	nitems_written (unsigned int which_output)
	Return the number of items written on output stream which_output. More...

tag_propagation_policy_t	tag_propagation_policy ()
	Asks for the policy used by the scheduler to moved tags downstream. More...

void	set_tag_propagation_policy (tag_propagation_policy_t p)
	Set the policy by the scheduler to determine how tags are moved downstream. More...

int	min_noutput_items () const
	Return the minimum number of output items this block can produce during a call to work. More...

void	set_min_noutput_items (int m)
	Set the minimum number of output items this block can produce during a call to work. More...

int	max_noutput_items ()
	Return the maximum number of output items this block will handle during a call to work. More...

void	set_max_noutput_items (int m)
	Set the maximum number of output items this block will handle during a call to work. More...

void	unset_max_noutput_items ()
	Clear the switch for using the max_noutput_items value of this block. More...

bool	is_set_max_noutput_items ()
	Ask the block if the flag is or is not set to use the internal value of max_noutput_items during a call to work. More...

void	expand_minmax_buffer (int port)

long	max_output_buffer (size_t i)
	Returns max buffer size on output port `i`. More...

void	set_max_output_buffer (long max_output_buffer)
	Request limit on max buffer size on all output ports. More...

void	set_max_output_buffer (int port, long max_output_buffer)
	Request limit on max buffer size on output port `port`. More...

long	min_output_buffer (size_t i)
	Returns min buffer size on output port `i`. More...

void	set_min_output_buffer (long min_output_buffer)
	Request limit on the minimum buffer size on all output ports. More...

void	set_min_output_buffer (int port, long min_output_buffer)
	Request limit on min buffer size on output port `port`. More...

void	set_blkd_input_timer_value (unsigned int timer_value_ms)
	DEPRECATED Configure the timer set when input is blocked `port`. More...

unsigned int	blkd_input_timer_value ()
	DEPRECATED Returns timer value set when input is blocked. More...

void	allocate_detail (int ninputs, int noutputs, const std::vector< int > &downstream_max_nitems_vec, const std::vector< uint64_t > &downstream_lcm_nitems_vec, const std::vector< uint32_t > &downstream_max_out_mult_vec)
	Allocate the block_detail and necessary output buffers for this block. More...

buffer_sptr	replace_buffer (size_t src_port, size_t dst_port, block_sptr block_owner)
	Replace the block's buffer with a new one owned by the block_owner parameter. More...

float	pc_noutput_items ()
	Gets instantaneous noutput_items performance counter. More...

float	pc_noutput_items_avg ()
	Gets average noutput_items performance counter. More...

float	pc_noutput_items_var ()
	Gets variance of noutput_items performance counter. More...

float	pc_nproduced ()
	Gets instantaneous num items produced performance counter. More...

float	pc_nproduced_avg ()
	Gets average num items produced performance counter. More...

float	pc_nproduced_var ()
	Gets variance of num items produced performance counter. More...

float	pc_input_buffers_full (int which)
	Gets instantaneous fullness of `which` input buffer. More...

float	pc_input_buffers_full_avg (int which)
	Gets average fullness of `which` input buffer. More...

float	pc_input_buffers_full_var (int which)
	Gets variance of fullness of `which` input buffer. More...

std::vector< float >	pc_input_buffers_full ()
	Gets instantaneous fullness of all input buffers. More...

std::vector< float >	pc_input_buffers_full_avg ()
	Gets average fullness of all input buffers. More...

std::vector< float >	pc_input_buffers_full_var ()
	Gets variance of fullness of all input buffers. More...

float	pc_output_buffers_full (int which)
	Gets instantaneous fullness of `which` output buffer. More...

float	pc_output_buffers_full_avg (int which)
	Gets average fullness of `which` output buffer. More...

float	pc_output_buffers_full_var (int which)
	Gets variance of fullness of `which` output buffer. More...

std::vector< float >	pc_output_buffers_full ()
	Gets instantaneous fullness of all output buffers. More...

std::vector< float >	pc_output_buffers_full_avg ()
	Gets average fullness of all output buffers. More...

std::vector< float >	pc_output_buffers_full_var ()
	Gets variance of fullness of all output buffers. More...

float	pc_work_time ()
	Gets instantaneous clock cycles spent in work. More...

float	pc_work_time_avg ()
	Gets average clock cycles spent in work. More...

float	pc_work_time_var ()
	Gets average clock cycles spent in work. More...

float	pc_work_time_total ()
	Gets total clock cycles spent in work. More...

float	pc_throughput_avg ()
	Gets average throughput. More...

void	reset_perf_counters ()
	Resets the performance counters. More...

void	setup_pc_rpc ()
	Sets up export of perf. counters to ControlPort. Only called by the scheduler. More...

bool	is_pc_rpc_set () const
	Checks if this block is already exporting perf. counters to ControlPort. More...

void	no_pc_rpc ()
	If the block calls this in its constructor, it's perf. counters will not be exported. More...

void	set_processor_affinity (const std::vector< int > &mask) override
	Set the thread's affinity to processor core `n`. More...

void	unset_processor_affinity () override
	Remove processor affinity to a specific core. More...

std::vector< int >	processor_affinity () override
	Get the current processor affinity. More...

int	active_thread_priority ()
	Get the current thread priority in use. More...

int	thread_priority ()
	Get the current thread priority stored. More...

int	set_thread_priority (int priority)
	Set the current thread priority. More...

bool	update_rate () const

void	system_handler (pmt::pmt_t msg)
	the system message handler More...

void	set_log_level (const std::string &level) override
	Set the logger's output level. More...

std::string	log_level () override
	Get the logger's output level. More...

bool	finished ()
	returns true when execution has completed due to a message connection More...

block_detail_sptr	detail () const

void	set_detail (block_detail_sptr detail)

void	notify_msg_neighbors ()
	Tell msg neighbors we are finished. More...

void	clear_finished ()
	Make sure we don't think we are finished. More...

std::string	identifier () const

Public Member Functions inherited from gr::basic_block
pmt::pmt_t	message_subscribers (pmt::pmt_t port)

	~basic_block () override

long	unique_id () const

long	symbolic_id () const

std::string	name () const

std::string	symbol_name () const

std::string	identifier () const

gr::io_signature::sptr	input_signature () const

gr::io_signature::sptr	output_signature () const

basic_block_sptr	to_basic_block ()

bool	alias_set () const

std::string	alias () const

pmt::pmt_t	alias_pmt () const

void	set_block_alias (std::string name)

void	message_port_register_in (pmt::pmt_t port_id)

void	message_port_register_out (pmt::pmt_t port_id)

void	message_port_pub (pmt::pmt_t port_id, pmt::pmt_t msg)

void	message_port_sub (pmt::pmt_t port_id, pmt::pmt_t target)

void	message_port_unsub (pmt::pmt_t port_id, pmt::pmt_t target)

virtual bool	message_port_is_hier (pmt::pmt_t port_id)

virtual bool	message_port_is_hier_in (pmt::pmt_t port_id)

virtual bool	message_port_is_hier_out (pmt::pmt_t port_id)

pmt::pmt_t	message_ports_in ()
	Get input message port names. More...

pmt::pmt_t	message_ports_out ()
	Get output message port names. More...

void	_post (pmt::pmt_t which_port, pmt::pmt_t msg)

bool	empty_p (pmt::pmt_t which_port)
	is the queue empty? More...

bool	empty_p ()

bool	empty_handled_p (pmt::pmt_t which_port)
	are all msg ports with handlers empty? More...

bool	empty_handled_p ()

size_t	nmsgs (pmt::pmt_t which_port)
	How many messages in the queue? More...

void	insert_tail (pmt::pmt_t which_port, pmt::pmt_t msg)

pmt::pmt_t	delete_head_nowait (pmt::pmt_t which_port)

msg_queue_t::iterator	get_iterator (pmt::pmt_t which_port)

void	erase_msg (pmt::pmt_t which_port, msg_queue_t::iterator it)

virtual bool	has_msg_port (pmt::pmt_t which_port)

const msg_queue_map_t &	get_msg_map (void) const

virtual void	setup_rpc ()
	Set up the RPC registered variables. More...

bool	is_rpc_set ()
	Ask if this block has been registered to the RPC. More...

void	rpc_set ()
	When the block is registered with the RPC, set this. More...

virtual bool	check_topology (int ninputs, int noutputs)
	Confirm that ninputs and noutputs is an acceptable combination. More...

template<typename T >
void	set_msg_handler (pmt::pmt_t which_port, T msg_handler)
	Set the callback that is fired when messages are available. More...

Public Member Functions inherited from gr::msg_accepter
	msg_accepter ()

	~msg_accepter () override

void	post (pmt::pmt_t which_port, pmt::pmt_t msg) override
	send `msg` to `msg_accepter` on port `which_port` More...

Public Member Functions inherited from gr::messages::msg_accepter
	msg_accepter ()

Static Public Member Functions
static sptr	make (const ::uhd::device_addr_t &device_addr, const ::uhd::stream_args_t &stream_args, const bool issue_stream_cmd_on_start=true)

static sptr	make (const std::string &device_addr_str, const ::uhd::stream_args_t &stream_args, const bool issue_stream_cmd_on_start=true)

Additional Inherited Members
Protected Types inherited from gr::basic_block
enum	vcolor { WHITE , GREY , BLACK }

Protected Member Functions inherited from gr::uhd::usrp_block
	usrp_block ()

	usrp_block (const std::string &name, gr::io_signature::sptr input_signature, gr::io_signature::sptr output_signature)

Protected Member Functions inherited from gr::sync_block
	sync_block (void)

	sync_block (const std::string &name, gr::io_signature::sptr input_signature, gr::io_signature::sptr output_signature)

Protected Member Functions inherited from gr::block
	block (void)

	block (const std::string &name, gr::io_signature::sptr input_signature, gr::io_signature::sptr output_signature)

void	set_fixed_rate (bool fixed_rate)

void	add_item_tag (unsigned int which_output, uint64_t abs_offset, const pmt::pmt_t &key, const pmt::pmt_t &value, const pmt::pmt_t &srcid=pmt::PMT_F)
	Adds a new tag onto the given output buffer. More...

void	add_item_tag (unsigned int which_output, const tag_t &tag)
	Adds a new tag onto the given output buffer. More...

void	remove_item_tag (unsigned int which_input, uint64_t abs_offset, const pmt::pmt_t &key, const pmt::pmt_t &value, const pmt::pmt_t &srcid=pmt::PMT_F)
	DEPRECATED. Will be removed in 3.8. More...

void	remove_item_tag (unsigned int which_input, const tag_t &tag)
	DEPRECATED. Will be removed in 3.8. More...

void	get_tags_in_range (std::vector< tag_t > &v, unsigned int which_input, uint64_t abs_start, uint64_t abs_end)
	Given a [start,end), returns a vector of all tags in the range. More...

void	get_tags_in_range (std::vector< tag_t > &v, unsigned int which_input, uint64_t abs_start, uint64_t abs_end, const pmt::pmt_t &key)
	Given a [start,end), returns a vector of all tags in the range with a given key. More...

void	get_tags_in_window (std::vector< tag_t > &v, unsigned int which_input, uint64_t rel_start, uint64_t rel_end)
	Gets all tags within the relative window of the current call to work. More...

void	get_tags_in_window (std::vector< tag_t > &v, unsigned int which_input, uint64_t rel_start, uint64_t rel_end, const pmt::pmt_t &key)
	Operates like gr::block::get_tags_in_window with the ability to only return tags with the specified `key`. More...

void	enable_update_rate (bool en)

buffer_sptr	allocate_buffer (size_t port, int downstream_max_nitems, uint64_t downstream_lcm_nitems, uint32_t downstream_max_out_mult)
	Allocate a buffer for the given output port of this block. Note that the downstream max number of items must be passed in to this function for consideration. More...

Protected Member Functions inherited from gr::basic_block
	basic_block (void)

	basic_block (const std::string &name, gr::io_signature::sptr input_signature, gr::io_signature::sptr output_signature)
	Protected constructor prevents instantiation by non-derived classes. More...

void	set_input_signature (gr::io_signature::sptr iosig)
	may only be called during constructor More...

void	set_output_signature (gr::io_signature::sptr iosig)
	may only be called during constructor More...

void	set_color (vcolor color)
	Allow the flowgraph to set for sorting and partitioning. More...

vcolor	color () const

virtual bool	has_msg_handler (pmt::pmt_t which_port)
	Tests if there is a handler attached to port `which_port`. More...

virtual void	dispatch_msg (pmt::pmt_t which_port, pmt::pmt_t msg)

template<typename Derived >
std::shared_ptr< Derived >	shared_from_base ()
	This is meant to be called by derived classes (e.g. block) to get a shared pointer internally. This is needed because std::enable_shared_from_this doesn't seem to work with derived classes in an inheritance hierarchy. More...

Protected Attributes inherited from gr::block
std::vector< long >	d_max_output_buffer

std::vector< long >	d_min_output_buffer

unsigned int	d_blkd_input_timer_value = 250

gr::thread::mutex	d_setlock

const pmt::pmt_t	d_pmt_done

const pmt::pmt_t	d_system_port

Protected Attributes inherited from gr::basic_block
std::string	d_name

gr::io_signature::sptr	d_input_signature

gr::io_signature::sptr	d_output_signature

long	d_unique_id

long	d_symbolic_id

std::string	d_symbol_name

std::string	d_symbol_alias

vcolor	d_color

bool	d_rpc_set

gr::logger_ptr	d_logger

gr::logger_ptr	d_debug_logger
	Default logger. More...

msg_queue_map_t	msg_queue
	Verbose logger. More...

std::vector< rpcbasic_sptr >	d_rpc_vars

pmt::pmt_t	d_message_subscribers

Detailed Description

USRP Source – Radio Receiver

The USRP source block receives samples and writes to a stream. The source block also provides API calls for receiver settings. See also gr::uhd::usrp_block for more public API calls.

RX Stream tagging:

The following tag keys will be produced by the work function:

pmt::string_to_symbol("rx_time")

The timestamp tag value is a pmt tuple of the following: (uint64 seconds, and double fractional seconds). A timestamp tag is produced at start() and after overflows.

Command interface

This block has a message port, which consumes UHD PMT commands. For a description of the command syntax, see Section Command Syntax.

For a more general description of the gr-uhd components, see UHD Interface.

Member Typedef Documentation

◆ sptr

typedef std::shared_ptr<usrp_source> gr::uhd::usrp_source::sptr

Member Function Documentation

◆ finite_acquisition()

virtual std::vector<std::complex<float> > gr::uhd::usrp_source::finite_acquisition ( const size_t nsamps )

pure virtual

Convenience function for finite data acquisition. This is not to be used with the scheduler; rather, one can request samples from the USRP in python. //TODO assumes fc32

Parameters

nsamps the number of samples

Returns: a vector of complex float samples

◆ finite_acquisition_v()

virtual std::vector<std::vector<std::complex<float> > > gr::uhd::usrp_source::finite_acquisition_v ( const size_t nsamps )

pure virtual

Convenience function for finite data acquisition. This is the multi-channel version of finite_acquisition; This is not to be used with the scheduler; rather, one can request samples from the USRP in python. //TODO assumes fc32

Parameters

nsamps the number of samples per channel

Returns: a vector of buffers, where each buffer represents a channel

◆ get_lo_export_enabled()

virtual bool gr::uhd::usrp_source::get_lo_export_enabled	(	const std::string &	name,
		size_t	chan = `0`
	)

pure virtual

Returns true if the currently selected LO is being exported.

Parameters

name	the name of the LO stage to query
chan	the channel index 0 to N-1

◆ get_lo_freq()

virtual double gr::uhd::usrp_source::get_lo_freq	(	const std::string &	name,
		size_t	chan = `0`
	)

pure virtual

Get the current RX LO frequency (Advanced).

Parameters

name	the name of the LO stage to query
chan	the channel index 0 to N-1

Returns: the configured LO frequency

◆ get_lo_freq_range()

virtual ::uhd::freq_range_t gr::uhd::usrp_source::get_lo_freq_range	(	const std::string &	name,
		size_t	chan = `0`
	)

pure virtual

Get the LO frequency range of the RX LO.

Parameters

name	the name of the LO stage to query
chan	the channel index 0 to N-1

Returns: a frequency range object

◆ get_lo_names()

virtual std::vector<std::string> gr::uhd::usrp_source::get_lo_names ( size_t chan = 0 )

pure virtual

Get a list of possible LO stage names

Parameters

chan	the channel index 0 to N-1

Returns: a vector of strings for possible LO names

◆ get_lo_source()

virtual const std::string gr::uhd::usrp_source::get_lo_source	(	const std::string &	name,
		size_t	chan = `0`
	)

pure virtual

Get the currently set LO source.

Parameters

name	the name of the LO stage to query
chan	the channel index 0 to N-1

Returns: the configured LO source

◆ get_lo_sources()

virtual std::vector<std::string> gr::uhd::usrp_source::get_lo_sources	(	const std::string &	name,
		size_t	chan = `0`
	)

pure virtual

Get a list of possible LO sources.

Parameters

name	the name of the LO stage to query
chan	the channel index 0 to N-1

Returns: a vector of strings for possible settings

◆ issue_stream_cmd()

virtual void gr::uhd::usrp_source::issue_stream_cmd ( const ::uhd::stream_cmd_t & cmd )

pure virtual

Advanced use only: Issue a stream command to all channels in this source block.

This method is intended to override the default "always on" behavior. After starting the flow graph, the user should call stop() on this block, then issue any desired arbitrary stream_cmd_t structs to the device. The USRP will be able to enqueue several stream commands in the FPGA.

Parameters

cmd	the stream command to issue to all source channels

◆ make() [1/2]

static sptr gr::uhd::usrp_source::make	(	const ::uhd::device_addr_t &	device_addr,
		const ::uhd::stream_args_t &	stream_args,
		const bool	issue_stream_cmd_on_start = `true`
	)

static

Parameters

device_addr	the address to identify the hardware
stream_args	the IO format and channel specification
issue_stream_cmd_on_start	enable or disable continuous streaming when flowgraph starts (default true)

Returns: a new USRP source block object

◆ make() [2/2]

static sptr gr::uhd::usrp_source::make	(	const std::string &	device_addr_str,
		const ::uhd::stream_args_t &	stream_args,
		const bool	issue_stream_cmd_on_start = `true`
	)

inlinestatic

◆ set_auto_dc_offset()

virtual void gr::uhd::usrp_source::set_auto_dc_offset	(	const bool	enb,
		size_t	chan = `0`
	)

pure virtual

Enable/disable the automatic DC offset correction. The automatic correction subtracts out the long-run average.

When disabled, the averaging option operation is halted. Once halted, the average value will be held constant until the user re-enables the automatic correction or overrides the value by manually setting the offset.

Parameters

enb	true to enable automatic DC offset correction
chan	the channel index 0 to N-1

◆ set_auto_iq_balance()

virtual void gr::uhd::usrp_source::set_auto_iq_balance	(	const bool	enb,
		size_t	chan = `0`
	)

pure virtual

Enable/Disable the RX frontend IQ imbalance correction.

Parameters

enb	true to enable automatic IQ imbalance correction
chan	the channel index 0 to N-1

◆ set_dc_offset()

virtual void gr::uhd::usrp_source::set_dc_offset	(	const std::complex< double > &	offset,
		size_t	chan = `0`
	)

pure virtual

Set a constant DC offset value. The value is complex to control both I and Q. Only set this when automatic correction is disabled.

Parameters

offset	the dc offset (1.0 is full-scale)
chan	the channel index 0 to N-1

◆ set_iq_balance()

virtual void gr::uhd::usrp_source::set_iq_balance	(	const std::complex< double > &	correction,
		size_t	chan = `0`
	)

pure virtual

Set the RX frontend IQ imbalance correction. Use this to adjust the magnitude and phase of I and Q.

Parameters

correction	the complex correction value
chan	the channel index 0 to N-1

◆ set_lo_export_enabled()

virtual void gr::uhd::usrp_source::set_lo_export_enabled	(	bool	enabled,
		const std::string &	name,
		size_t	chan = `0`
	)

pure virtual

Set whether the LO used by the usrp device is exported For usrps that support exportable LOs, this function configures if the LO used by chan is exported or not.

Parameters

enabled	if true then export the LO
name	the name of the LO stage to update
chan	the channel index 0 to N-1 for the source channel

◆ set_lo_freq()

virtual double gr::uhd::usrp_source::set_lo_freq	(	double	freq,
		const std::string &	name,
		size_t	chan = `0`
	)

pure virtual

Set the RX LO frequency (Advanced).

Parameters

freq	the frequency to set the LO to
name	the name of the LO stage to update
chan	the channel index 0 to N-1

Returns: a coerced LO frequency

◆ set_lo_source()

virtual void gr::uhd::usrp_source::set_lo_source	(	const std::string &	src,
		const std::string &	name,
		size_t	chan = `0`
	)

pure virtual

Set the LO source for the usrp device. For usrps that support selectable LOs, this function allows switching between them. Typical options for source: internal, external.

Parameters

src	a string representing the LO source
name	the name of the LO stage to update
chan	the channel index 0 to N-1

◆ set_recv_timeout()

virtual void gr::uhd::usrp_source::set_recv_timeout	(	const double	timeout,
		const bool	one_packet = `true`
	)

pure virtual

Configure the timeout value on the UHD recv() call

This is an advanced use parameter. Changing the timeout value affects the latency of this block; a high timeout value can be more optimal for high-throughput applications (e.g., 1 second) and setting it to zero will have the best latency. Changing the timeout value may also be useful for custom FPGA modifications, where traffic might not be continuously streaming. For specialized high-performance use cases, twiddling these knobs may improve performance, but changes are not generally applicable.

Note that UHD's recv() call may block until the timeout is over, which means this block might also block for up to the timeout value.

Parameters

timeout	Timeout parameter in seconds. Cf. the UHD manual for uhd::rx_streamer::recv() for more details. A lower value will mean lower latency, but higher CPU load.
one_packet	If true, only receive one packet at a time. Cf. the UHD manual for uhd::rx_streamer::recv() for more details. A value of true will mean lower latency, but higher CPU load.

◆ set_rx_agc()

virtual void gr::uhd::usrp_source::set_rx_agc	(	const bool	enable,
		size_t	chan = `0`
	)

pure virtual

Enable/disable the RX AGC module. If AGC is turned on, all manual gain settings are ignored.

Parameters

enable	true to enable the AGC
chan	the channel index 0 to N-1

◆ set_start_time()

virtual void gr::uhd::usrp_source::set_start_time ( const ::uhd::time_spec_t & time )

pure virtual

Set the start time for incoming samples. To control when samples are received, set this value before starting the flow graph. The value is cleared after each run. When not specified, the start time will be:

Immediately for the one channel case
in the near future for multi-channel

Parameters

time	the absolute time for reception to begin

The documentation for this class was generated from the following file:

usrp_source.h

Public Types

Public Member Functions

Static Public Member Functions

Additional Inherited Members

Detailed Description

Command interface

Member Typedef Documentation

◆ sptr

Member Function Documentation

◆ finite_acquisition()

◆ finite_acquisition_v()

◆ get_lo_export_enabled()

◆ get_lo_freq()

◆ get_lo_freq_range()

◆ get_lo_names()

◆ get_lo_source()

◆ get_lo_sources()

◆ issue_stream_cmd()

◆ make() [1/2]

◆ make() [2/2]

◆ set_auto_dc_offset()

◆ set_auto_iq_balance()

◆ set_dc_offset()

◆ set_iq_balance()

◆ set_lo_export_enabled()

◆ set_lo_freq()

◆ set_lo_source()

◆ set_recv_timeout()

◆ set_rx_agc()

◆ set_start_time()