| Commit message (Expand) | Author | Age | Files | Lines |
|---|
| * | -Updated to allow BURX support to be built into standard txrx.bin | JohnOrlando | 2010-05-17 | 1 | -0/+2 |
| * | set antenna defaults to 0 | Josh Blum | 2010-03-01 | 1 | -0/+1 |
| * | Added call to set antenna. Split XCVR into new thing cuz size. | Josh Blum | 2010-02-25 | 1 | -5/+6 |
| * | First pass WBX USRP2 driver | Jason Abele | 2010-02-10 | 1 | -0/+2 |
| * | Disable support for tvrx rev 2 on usrp2. There are only a few of these in ex... | Eric Blossom | 2009-12-08 | 1 | -0/+2 |
| * | somebody commented out the tx mux setting which prevented the xcvr2450 from w... | matt | 2009-04-27 | 1 | -2/+2 |
| * | New standalone firmware, burn_dbsrx_eeprom, that burns new dbid into | eb | 2009-03-05 | 1 | -1/+1 |
| * | Merged r10383:10390 from jcorgan/u2-wip into trunk. | jcorgan | 2009-02-04 | 1 | -3/+11 |
| * | work in progress: xcvr running, needs work with divisors | matt | 2009-02-03 | 1 | -1/+1 |
| * | xcvr dboard support | jblum | 2009-01-30 | 1 | -0/+5 |
| * | dbsrx daughterboard support, gain works, not freq | matt | 2009-01-28 | 1 | -0/+2 |
| * | enable all rfx boards | matt | 2008-10-31 | 1 | -0/+16 |
| * | Deadly printfs turned off... Specified gain ranges for TV Rx and RFX boards. | eb | 2008-10-26 | 1 | -1/+5 |
| * | Added firmware support for adc_mux to handle swapping I/Q, etc. | eb | 2008-10-15 | 1 | -5/+5 |
| * | fixed problem with negative offsets in calc_dxc_freq | eb | 2008-10-14 | 1 | -9/+8 |
| * | s/w support for tx and rx mux | eb | 2008-10-14 | 1 | -0/+58 |
| * | fix diagnostic output | eb | 2008-10-13 | 1 | -1/+1 |
| * | USRP2 firmware fixes for EDK 10.1 microblaze toolchain. Firmware now builds | eb | 2008-10-04 | 1 | -12/+6 |
| * | Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and gr-usrp2... | jcorgan | 2008-09-08 | 1 | -0/+340 |
