Polyphase filterbank channelizer with gr_complex input, gr_complex output and float taps. More...
#include <pfb_channelizer_ccf.h>
Public Types | |
| typedef boost::shared_ptr < pfb_channelizer_ccf > | sptr |
Public Member Functions | |
| virtual void | set_taps (const std::vector< float > &taps)=0 |
| virtual void | print_taps ()=0 |
| virtual std::vector < std::vector< float > > | taps () const =0 |
| virtual void | set_channel_map (const std::vector< int > &map)=0 |
| virtual std::vector< int > | channel_map () const =0 |
Static Public Member Functions | |
| static sptr | make (unsigned int numchans, const std::vector< float > &taps, float oversample_rate) |
Detailed Description
Polyphase filterbank channelizer with gr_complex input, gr_complex output and float taps.
This block takes in complex inputs and channelizes it to M channels of equal bandwidth. Each of the resulting channels is decimated to the new rate that is the input sampling rate fs divided by the number of channels, M.
The PFB channelizer code takes the taps generated above and builds a set of filters. The set contains M number of filters and each filter contains ceil(taps.size()/decim) number of taps. Each tap from the filter prototype is sequentially inserted into the next filter. When all of the input taps are used, the remaining filters in the filterbank are filled out with 0's to make sure each filter has the same number of taps.
Each filter operates using the gr::blocks::fir_filter_XXX classs of GNU Radio, which takes the input stream at i and performs the inner product calculation to i+(n-1) where n is the number of filter taps. To efficiently handle this in the GNU Radio structure, each filter input must come from its own input stream. So the channelizer must be provided with M streams where the input stream has been deinterleaved. This is most easily done using the gr::blocks::stream_to_streams block.
The output is then produced as a vector, where index i in the vector is the next sample from the ith channel. This is most easily handled by sending the output to a gr::blocks::vector_to_streams block to handle the conversion and passing M streams out.
The input and output formatting is done using a hier_block2 called pfb_channelizer_ccf. This can take in a single stream and outputs M streams based on the behavior described above.
The filter's taps should be based on the input sampling rate.
For example, using the GNU Radio's firdes utility to building filters, we build a low-pass filter with a sampling rate of fs, a 3-dB bandwidth of BW and a transition bandwidth of TB. We can also specify the out-of-band attenuation to use, ATT, and the filter window function (a Blackman-harris window in this case). The first input is the gain of the filter, which we specify here as unity.
self._taps = filter.firdes.low_pass_2(1, fs, BW, TB, attenuation_dB=ATT, window=filter.firdes.WIN_BLACKMAN_hARRIS)
The filter output can also be overs ampled. The over sampling rate is the ratio of the the actual output sampling rate to the normal output sampling rate. It must be rationally related to the number of channels as N/i for i in [1,N], which gives an outputsample rate of [fs/N, fs] where fs is the input sample rate and N is the number of channels.
For example, for 6 channels with fs = 6000 Hz, the normal rate is 6000/6 = 1000 Hz. Allowable oversampling rates are 6/6, 6/5, 6/4, 6/3, 6/2, and 6/1 where the output sample rate of a 6/1 oversample ratio is 6000 Hz, or 6 times the normal 1000 Hz. A rate of 6/5 = 1.2, so the output rate would be 1200 Hz.
The theory behind this block can be found in Chapter 6 of the following book.
f. harris, "Multirate Signal Processing for Communication Systems," Upper Saddle River, NJ: Prentice Hall, Inc. 2004.
Member Typedef Documentation
Member Function Documentation
| virtual std::vector<int> gr::filter::pfb_channelizer_ccf::channel_map | ( | ) | const [pure virtual] |
Gets the current channel map.
| static sptr gr::filter::pfb_channelizer_ccf::make | ( | unsigned int | numchans, |
| const std::vector< float > & | taps, | ||
| float | oversample_rate | ||
| ) | [static] |
Build the polyphase filterbank decimator.
- Parameters:
-
numchans (unsigned integer) Specifies the number of channels M taps (vector/list of floats) The prototype filter to populate the filterbank. oversample_rate (float) The over sampling rate is the ratio of the the actual output sampling rate to the normal output sampling rate. It must be rationally related to the number of channels as N/i for i in [1,N], which gives an outputsample rate of [fs/N, fs] where fs is the input sample rate and N is the number of channels.
For example, for 6 channels with fs = 6000 Hz, the normal rateis 6000/6 = 1000 Hz. Allowable oversampling rates are 6/6, 6/5, 6/4, 6/3, 6/2, and 6/1 where the output sample rate of a 6/1 oversample ratio is 6000 Hz, or 6 times the normal 1000 Hz.
| virtual void gr::filter::pfb_channelizer_ccf::print_taps | ( | ) | [pure virtual] |
Print all of the filterbank taps to screen.
| virtual void gr::filter::pfb_channelizer_ccf::set_channel_map | ( | const std::vector< int > & | map | ) | [pure virtual] |
Set the channel map. Channels are numbers as:
N/2+1 | ... | N-1 | 0 | 1 | 2 | ... | N/2 <------------------- 0 --------------------> freq
So output stream 0 comes from channel 0, etc. Setting a new channel map allows the user to specify which channel in frequency he/she wants to got to which output stream.
The map should have the same number of elements as the number of output connections from the block. The minimum value of the map is 0 (for the 0th channel) and the maximum number is N-1 where N is the number of channels.
We specify M as the number of output connections made where M <= N, so only M out of N channels are driven to an output stream. The number of items in the channel map should be at least M long. If there are more channels specified, any value in the map over M-1 will be ignored. If the size of the map is less than M the behavior is unknown (we don't wish to check every entry into the work function).
This means that if the channelizer is splitting the signal up into N channels but only M channels are specified in the map (where M <= N), then M output streams must be connected and the map and the channel numbers used must be less than N-1. Output channel number can be reused, too. By default, the map is [0...M-1] with M = N.
| virtual void gr::filter::pfb_channelizer_ccf::set_taps | ( | const std::vector< float > & | taps | ) | [pure virtual] |
Resets the filterbank's filter taps with the new prototype filter
- Parameters:
-
taps (vector/list of floats) The prototype filter to populate the filterbank.
| virtual std::vector<std::vector<float> > gr::filter::pfb_channelizer_ccf::taps | ( | ) | const [pure virtual] |
Return a vector<vector<>> of the filterbank taps
The documentation for this class was generated from the following file:
