vocoder_cvsd_encode_sb.h

Go to the documentation of this file.

/* -*- c++ -*- */
/*
 * Copyright 2007 Free Software Foundation, Inc.
 * 
 * This file is part of GNU Radio
 * 
 * GNU Radio is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 3, or (at your option)
 * any later version.
 * 
 * GNU Radio is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 * 
 * You should have received a copy of the GNU General Public License
 * along with GNU Radio; see the file COPYING.  If not, write to
 * the Free Software Foundation, Inc., 51 Franklin Street,
 * Boston, MA 02110-1301, USA.
 */
#ifndef INCLUDED_VOCODER_CVSD_ENCODER_SB_H
#define INCLUDED_VOCODER_CVSD_ENCODER_SB_H

#include <vocoder_api.h>
#include <gr_sync_decimator.h>

class vocoder_cvsd_encode_sb;

typedef boost::shared_ptr<vocoder_cvsd_encode_sb> vocoder_cvsd_encode_sb_sptr;

 /*!
  * \brief Constructor parameters to initialize the CVSD encoder.  The
  * default values are modeled after the Bluetooth standard and should
  * not be changed except by an advanced user
  *
  * \ingroup vocoder_blk
  *
  * \param min_step       Minimum step size used to update the internal reference.  Default: "10"
  * \param max_step       Maximum step size used to update the internal reference.  Default: "1280"
  * \param step_decay     Decay factor applied to step size when there is not a run of J output 1s or 0s.  Default: "0.9990234375"  (i.e. 1-1/1024)
  * \param accum_decay    Decay factor applied to the internal reference during every interation of the codec.  Default: "0.96875"  (i.e. 1-1/32)
  * \param K;             Size of shift register; the number of output bits remembered by codec (must be less or equal to 32).  Default: "32"
  * \param J;             Number of bits in the shift register that are equal; i.e. the size of a run of 1s, 0s. Default: "4"
  * \param pos_accum_max  Maximum integer value allowed for the internal reference.  Default: "32767" (2^15 - 1 or MAXSHORT)
  * \param neg_accum_max  Minimum integer value allowed for the internal reference.  Default: "-32767" (-2^15 + 1 or MINSHORT+1)
  *
  */

VOCODER_API vocoder_cvsd_encode_sb_sptr vocoder_make_cvsd_encode_sb(short min_step=10,
                                                        short max_step=1280,
                                                        double step_decay=0.9990234375,
                                                        double accum_decay= 0.96875,
                                                        int K=32,
                                                        int J=4,
                                                        short pos_accum_max=32767,
                                                        short neg_accum_max=-32767);

/*!
 * \brief This block performs CVSD audio encoding.  Its design and implementation
 * is modeled after the CVSD encoder/decoder specifications defined in the
 * Bluetooth standard.
 *
 * \ingroup vocoder_blk
 *
 * CVSD is a method for encoding speech that seeks to reduce the
 * bandwidth required for digital voice transmission.  CVSD takes
 * advantage of strong correlation between samples, quantizing the
 * difference in amplitude between two consecutive samples.  This
 * difference requires fewer quantization levels as compared to other
 * methods that quantize the actual amplitude level, reducing the
 * bandwidth.  CVSD employs a two level quantizer (one bit) and an
 * adaptive algorithm that allows for continuous step size adjustment.
 *
 * The coder can represent low amplitude signals with accuracy without
 * sacrificing performance on large amplitude signals, a trade off that
 * occurs in some non-adaptive modulations.
 *
 * The CVSD encoder effectively provides 8-to-1 compression.  More
 * specifically, each incoming audio sample is compared to an internal
 * reference value.  If the input is greater or equal to the reference,
 * the encoder outputs a "1" bit.  If the input is less than the reference,
 * the encoder outputs a "0" bit.  The reference value is then updated
 * accordingly based on the frequency of outputted "1" or "0" bits.  By
 * grouping 8 outputs bits together, the encoder essentially produce one
 * output byte for every 8 input audio samples.
 *
 * This encoder requires that input audio samples are 2-byte short signed
 * integers.  The result bandwidth conversion, therefore, is 16 input bytes
 * of raw audio data to 1 output byte of encoded audio data.
 *
 * The CVSD encoder module must be prefixed by an up-converter to over-sample
 * the audio data prior to encoding.  The Bluetooth standard specifically
 * calls for a 1-to-8 interpolating up-converter.  While this reduces the
 * overall compression of the codec, this is required so that the encoder
 * can accurately compute the slope between adjacent audio samples and
 * correctly update its internal reference value.
 *
 * References:
 *
 * 1.  Continuously Variable Slope Delta Modulation (CVSD) A Tutorial,
 *     Available: http://www.eetkorea.com/ARTICLES/2003AUG/A/2003AUG29_NTEK_RFD_AN02.PDF.
 *
 * 2.  Specification of The Bluetooth System
 *     Available: http://grouper.ieee.org/groups/802/15/Bluetooth/core_10_b.pdf.
 *
 * 3.  McGarrity, S., Bluetooth Full Duplex Voice and Data Transmission. 2002.
 *     Bluetooth Voice Simulink® Model, Available:
 *     http://www.mathworks.com/company/newsletters/digest/nov01/bluetooth.html
 *
 */

class VOCODER_API vocoder_cvsd_encode_sb : public gr_sync_decimator
{
private:
  friend VOCODER_API vocoder_cvsd_encode_sb_sptr vocoder_make_cvsd_encode_sb(short min_step,
                                                                 short max_step,
                                                                 double step_decay,
                                                                 double accum_decay,
                                                                 int K,
                                                                 int J,
                                                                 short pos_accum_max,
                                                                 short neg_accum_max);

  vocoder_cvsd_encode_sb(short min_step, short max_step, double step_decay,
                         double accum_decay, int K, int J,
                         short pos_accum_max, short neg_accum_max);
  
  //! Member functions required by the encoder/decoder
  //! \brief Rounding function specific to CVSD
  //! \return the input value rounded to the nearest integer
  int cvsd_round(double input);
  
  //! \brief A power function specific to CVSD data formats
  //! \return (radix)^power, where radix and power are short integers
  unsigned int cvsd_pow (short radix, short power);
 
  //! \brief Sums number of 1's in the input
  //! \return the number of 1s in the four bytes of an input unsigned integer
  unsigned char cvsd_bitwise_sum (unsigned int input);

  // Members variables related to the CVSD encoder use to update interal reference value
  short d_min_step;
  short d_max_step;
  double d_step_decay;
  double d_accum_decay;

  int d_K; //!< \brief Size of shift register; the number of output bits remembered in shift register
  int d_J; //!< \brief Number of bits in the shift register that are equal; size of run of 1s, 0s
  
  short d_pos_accum_max;
  short d_neg_accum_max;

  int d_accum;            //!< \brief Current value of internal reference
  int d_loop_counter;     //!< \brief Current value of the loop counter
  unsigned int d_runner;  //!< \brief Current value of the shift register
  short d_stepsize;       //!< \brief Current value of the step sizer

 public:
  ~vocoder_cvsd_encode_sb ();   // public destructor

  short min_step() { return d_min_step; }
  short max_step() { return d_max_step; }
  double step_decay() { return d_step_decay; }
  double accum_decay() { return d_accum_decay; }
  int K() { return d_K; }
  int J() { return d_J; }
  short pos_accum_max() { return d_pos_accum_max; }
  short neg_accum_max() { return d_neg_accum_max; }

  int work (int noutput_items,
            gr_vector_const_void_star &input_items,
            gr_vector_void_star &output_items);
};

#endif /* INCLUDED_VOCODER_CVSD_ENCODE_SB_H */