Signal Level Control (AGC)

Collaboration diagram for Signal Level Control (AGC):

Classes
class	gr_agc2_cc
	high performance Automatic Gain Control classFor Power the absolute value of the complex number is used. More...
class	gr_agc2_ff
	high performance Automatic Gain Control class More...
class	gr_agc_cc
	high performance Automatic Gain Control classFor Power the absolute value of the complex number is used. More...
class	gr_agc_ff
	high performance Automatic Gain Control classPower is approximated by absolute value More...
class	gr_ctcss_squelch_ff
	gate or zero output if ctcss tone not present More...
class	gr_dpll_bb
	Detect the peak of a signalIf a peak is detected, this block outputs a 1, or it outputs 0's. More...
class	gr_feedforward_agc_cc
	Non-causal AGC which computes required gain based on max absolute value over nsamples. More...
class	gr_peak_detector2_fb
	Detect the peak of a signalIf a peak is detected, this block outputs a 1, or it outputs 0's. A separate debug output may be connected, to view the internal EWMA described below. More...
class	gr_pwr_squelch_cc
	gate or zero output when input power below threshold More...
class	gr_pwr_squelch_ff
	gate or zero output when input power below threshold More...
class	gr_regenerate_bb
	Detect the peak of a signal and repeat every period samplesIf a peak is detected, this block outputs a 1 repeated every period samples until reset by detection of another 1 on the input or stopped after max_regen regenerations have occurred. More...
class	gr_simple_squelch_cc
	simple squelch block based on average signal power and threshold in dB. More...