/* -*- c++ -*- */
/*
 * Copyright 2003,2004,2006,2009 Free Software Foundation, Inc.
 * 
 * This file is part of GNU Radio
 * 
 * GNU Radio is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 3, or (at your option)
 * any later version.
 * 
 * GNU Radio is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 * 
 * You should have received a copy of the GNU General Public License
 * along with GNU Radio; see the file COPYING.  If not, write to
 * the Free Software Foundation, Inc., 51 Franklin Street,
 * Boston, MA 02110-1301, USA.
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include "usrp/usrp_prims.h"
#include "usrp_commands.h"
#include "usrp_ids.h"
#include "usrp_i2c_addr.h"
#include "fpga_regs_common.h"
#include "fpga_regs_standard.h"
#include <usb.h>
#include <errno.h>
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
#include <time.h>		// FIXME should check with autoconf (nanosleep)
#include <algorithm>
#include <ad9862.h>
#include <assert.h>

extern "C" {
#include "md5.h"
};

#define VERBOSE 0

using namespace ad9862;

/*
 * Forward Declarations
 */

bool our_nanosleep (const struct timespec *delay);
const char *get_proto_filename (const std::string user_filename,
                                const char *env_var,
                                const char *def);
char *find_file (const char *filename, int hw_rev);
void load_status_msg (usrp_load_status_t s, const char *type,
                      const char *filename);
bool usrp1_fpga_write (libusb_device_handle *udh, int regno, int value);
bool usrp1_fpga_read (libusb_device_handle *udh, int regno, int *value);
bool usrp_set_switch (libusb_device_handle *udh, int cmd_byte, bool on);

bool usrp_set_fpga_reset (struct usb_dev_handle *udh, bool on);
bool usrp_set_fpga_tx_enable (struct usb_dev_handle *udh, bool on);
bool usrp_set_fpga_rx_enable (struct usb_dev_handle *udh, bool on);
bool usrp_set_fpga_tx_reset (struct usb_dev_handle *udh, bool on);
bool usrp_set_fpga_rx_reset (struct usb_dev_handle *udh, bool on);



static const int FIRMWARE_HASH_SLOT	= 0;
static const int FPGA_HASH_SLOT 	= 1;

static const int hash_slot_addr[2] = {
  USRP_HASH_SLOT_0_ADDR,
  USRP_HASH_SLOT_1_ADDR
};

static const char *default_firmware_filename = "std.ihx";
static const char *default_fpga_filename     = "std_2rxhb_2tx.rbf";

#include "std_paths.h"
#include <stdio.h>

void
usrp_one_time_init ()
{
  static bool first = true;

  if (first){
    first = false;
    usb_init ();			// usb library init
    usb_find_busses ();
    usb_find_devices ();
  }
}

void
usrp_rescan ()
{
  usb_find_busses ();
  usb_find_devices ();
}

// ----------------------------------------------------------------

/*
 * q must be a real USRP, not an FX2.  Return its hardware rev number.
 */
int
usrp_hw_rev (struct usb_device *q)
{
  return q->descriptor.bcdDevice & 0x00FF;
}

/*
 * q must be a real USRP, not an FX2.  Return true if it's configured.
 */
static bool
_usrp_configured_p (struct usb_device *q)
{
  return (q->descriptor.bcdDevice & 0xFF00) != 0;
}

bool
usrp_usrp_p (struct usb_device *q)
{
  return (q->descriptor.idVendor == USB_VID_FSF
	  && q->descriptor.idProduct == USB_PID_FSF_USRP);
}

bool
usrp_fx2_p (struct usb_device *q)
{
  return (q->descriptor.idVendor == USB_VID_CYPRESS
	  && q->descriptor.idProduct == USB_PID_CYPRESS_FX2);
}

// ----------------------------------------------------------------

struct usb_device *
usrp_find_device (int nth, bool fx2_ok_p, libusb_context *ctx)
{
  struct usb_bus *p;
  struct usb_device *q;
  int	 n_found = 0;

  usrp_one_time_init ();
  
  p = usb_get_busses();
  while (p != NULL){
    q = p->devices;
    while (q != NULL){
      if (usrp_usrp_p (q) || (fx2_ok_p && usrp_fx2_p (q))){
	if (n_found == nth)	// return this one
	  return q;
	n_found++;		// keep looking
      }
      q = q->next;
    }
    p = p->next;
  }
  return 0;	// not found
}

struct usb_dev_handle *
usrp_open_interface (struct usb_device *dev, int interface, int altinterface)
{
  struct usb_dev_handle *udh = usb_open (dev);
  if (udh == 0)
    return 0;

  if (dev != usb_device (udh)){
    fprintf (stderr, "%s:%d: internal error!\n", __FILE__, __LINE__);
    abort ();
  }

#if defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__)
  // There's no get get_configuration function, and with some of the newer kernels
  // setting the configuration, even if to the same value, hoses any other processes
  // that have it open.  Hence we opt to not set it at all (We've only
  // got a single configuration anyway).  This may hose the win32 stuff...

  // Appears to be required for libusb-win32 and Cygwin -- dew 09/20/06
  if (usb_set_configuration (udh, 1) < 0){
    /*
     * Ignore this error.  
     *
     * Seems that something changed in drivers/usb/core/devio.c:proc_setconfig such that
     * it returns -EBUSY if _any_ of the interfaces of a device are open.
     * We've only got a single configuration, so setting it doesn't even seem
     * like it should be required.
     */
  }
#endif

  if (usb_claim_interface (udh, interface) < 0){
    fprintf (stderr, "%s:usb_claim_interface: failed interface %d\n", __FUNCTION__,interface);
    fprintf (stderr, "%s\n", usb_strerror());
    usb_close (udh);
    return 0;
  }

  if (usb_set_altinterface (udh, altinterface) < 0){
    fprintf (stderr, "%s:usb_set_alt_interface: failed\n", __FUNCTION__);
    fprintf (stderr, "%s\n", usb_strerror());
    usb_release_interface (udh, interface);
    usb_close (udh);
    return 0;
  }

  return udh;
}

bool
usrp_close_interface (struct usb_dev_handle *udh)
{
  // we're assuming that closing an interface automatically releases it.
  return usb_close (udh) == 0;
}

// ----------------------------------------------------------------
// write internal ram using Cypress vendor extension

bool
write_internal_ram (struct usb_dev_handle *udh, unsigned char *buf,
		    int start_addr, size_t len)
{
  int addr;
  int n;
  int a;
  int quanta = MAX_EP0_PKTSIZE;

  for (addr = start_addr; addr < start_addr + (int) len; addr += quanta){
    n = len + start_addr - addr;
    if (n > quanta)
      n = quanta;

    a = usb_control_msg (udh, 0x40, 0xA0,
			 addr, 0, (char *)(buf + (addr - start_addr)), n, 1000);

    if (a < 0){
      fprintf(stderr,"write_internal_ram failed: %s\n", usb_strerror());
      return false;
    }
  }
  return true;
}


// ----------------------------------------------------------------
// write vendor extension command to USRP

int
write_cmd (struct usb_dev_handle *udh,
	   int request, int value, int index,
	   unsigned char *bytes, int len)
{
  int	requesttype = (request & 0x80) ? VRT_VENDOR_IN : VRT_VENDOR_OUT;

  int r = usb_control_msg (udh, requesttype, request, value, index,
			   (char *) bytes, len, 1000);
  if (r < 0){
    // we get EPIPE if the firmware stalls the endpoint.
    if (errno != EPIPE)
      fprintf (stderr, "usb_control_msg failed: %s\n", usb_strerror ());
  }

  return r;
}


bool
usrp_set_hash (struct usb_dev_handle *udh, int which,
	       const unsigned char hash[USRP_HASH_SIZE])
{
  which &= 1;
  
  // we use the Cypress firmware down load command to jam it in.
  int r = usb_control_msg (udh, 0x40, 0xa0, hash_slot_addr[which], 0,
			   (char *) hash, USRP_HASH_SIZE, 1000);
  return r == USRP_HASH_SIZE;
}

bool
usrp_get_hash (struct usb_dev_handle *udh, int which, 
	       unsigned char hash[USRP_HASH_SIZE])
{
  which &= 1;
  
  // we use the Cypress firmware upload command to fetch it.
  int r = usb_control_msg (udh, 0xc0, 0xa0, hash_slot_addr[which], 0,
			   (char *) hash, USRP_HASH_SIZE, 1000);
  return r == USRP_HASH_SIZE;
}

bool
usrp_write_fpga_reg (struct usb_dev_handle *udh, int reg, int value)
{
  switch (usrp_hw_rev (usb_device (udh))){
  case 0:			// not supported ;)
    abort();	

  default:
    return usrp1_fpga_write (udh, reg, value);
  }
}

bool
usrp_read_fpga_reg (struct usb_dev_handle *udh, int reg, int *value)
{
  switch (usrp_hw_rev (usb_device (udh))){
  case 0:		// not supported ;)
    abort();
    
  default:
    return usrp1_fpga_read (udh, reg, value);
  }
}




static usb_dev_handle *
open_nth_cmd_interface (int nth)
{
  struct usb_device *udev = usrp_find_device (nth);
  if (udev == 0){
    fprintf (stderr, "usrp: failed to find usrp[%d]\n", nth);
    return 0;
  }

  struct usb_dev_handle *udh;

  udh = usrp_open_cmd_interface (udev);
  if (udh == 0){
    // FIXME this could be because somebody else has it open.
    // We should delay and retry...
    fprintf (stderr, "open_nth_cmd_interface: open_cmd_interface failed\n");
    usb_strerror ();
    return 0;
  }

  return udh;
}


usrp_load_status_t
usrp_load_firmware_nth (int nth, const char *filename, bool force, libusb_context *ctx){
  struct usb_dev_handle *udh = open_nth_cmd_interface (nth);
  if (udh == 0)
    return ULS_ERROR;

  usrp_load_status_t s = usrp_load_firmware (udh, filename, force);
  usrp_close_interface (udh);

  switch (s){

  case ULS_ALREADY_LOADED:		// nothing changed...
    return ULS_ALREADY_LOADED;
    break;

  case ULS_OK:
    // we loaded firmware successfully.

    // It's highly likely that the board will renumerate (simulate a
    // disconnect/reconnect sequence), invalidating our current
    // handle.

    // FIXME.  Turn this into a loop that rescans until we refind ourselves
    
    struct timespec	t;	// delay for 1 second
    t.tv_sec = 2;
    t.tv_nsec = 0;
    our_nanosleep (&t);

    usb_find_busses ();		// rescan busses and devices
    usb_find_devices ();

    return ULS_OK;

  default:
  case ULS_ERROR:		// some kind of problem
    return ULS_ERROR;
  }
}

bool
usrp_load_standard_bits (int nth, bool force,
			 const std::string fpga_filename,
			 const std::string firmware_filename,
			 libusb_context *ctx)
{
  usrp_load_status_t 	s;
  const char		*filename;
  const char		*proto_filename;
  int hw_rev;

  // first, figure out what hardware rev we're dealing with
  {
    struct usb_device *udev = usrp_find_device (nth);
    if (udev == 0){
      fprintf (stderr, "usrp: failed to find usrp[%d]\n", nth);
      return false;
    }
    hw_rev = usrp_hw_rev (udev);
  }

  // start by loading the firmware

  proto_filename = get_proto_filename(firmware_filename, "USRP_FIRMWARE",
				      default_firmware_filename);
  filename = find_file(proto_filename, hw_rev);
  if (filename == 0){
    fprintf (stderr, "Can't find firmware: %s\n", proto_filename);
    return false;
  }

  s = usrp_load_firmware_nth (nth, filename, force);
  load_status_msg (s, "firmware", filename);

  if (s == ULS_ERROR)
    return false;

  // if we actually loaded firmware, we must reload fpga ...
  if (s == ULS_OK)
    force = true;

  // now move on to the fpga configuration bitstream

  proto_filename = get_proto_filename(fpga_filename, "USRP_FPGA",
				      default_fpga_filename);
  filename = find_file (proto_filename, hw_rev);
  if (filename == 0){
    fprintf (stderr, "Can't find fpga bitstream: %s\n", proto_filename);
    return false;
  }

  struct usb_dev_handle *udh = open_nth_cmd_interface (nth);
  if (udh == 0)
    return false;
  
  s = usrp_load_fpga (udh, filename, force);
  usrp_close_interface (udh);
  load_status_msg (s, "fpga bitstream", filename);

  if (s == ULS_ERROR)
    return false;

  return true;
}

void
power_down_9862s (struct usb_dev_handle *udh)
{
  static const unsigned char regs[] = {
    REG_RX_PWR_DN,      0x01,              // everything
    REG_TX_PWR_DN,      0x0f,              // pwr dn digital and analog_both
    REG_TX_MODULATOR,   0x00               // coarse & fine modulators disabled
  };

  switch (usrp_hw_rev (usb_device (udh))){
  case 0:
    break;

  default:
    usrp_9862_write_many_all (udh, regs, sizeof (regs));
    break;
  }
}


std::string
usrp_serial_number(struct usb_dev_handle *udh)
{
  unsigned char iserial = usb_device(udh)->descriptor.iSerialNumber;
  if (iserial == 0)
    return "";

  char buf[1024];
  if (usb_get_string_simple(udh, iserial, buf, sizeof(buf)) < 0)
    return "";

  return buf;
}