From c62085a66bd97f389f49167492f7dccfb0b02976 Mon Sep 17 00:00:00 2001
From: ttsou <ttsou@vt.edu>
Date: Thu, 27 Aug 2009 18:13:54 -0400
Subject: first shot at re-adding libusb-0.12 support
---
usrp/host/lib/usrp_basic_libusb.cc | 146 +++++++++++++++++++++++++++++++++++++
1 file changed, 146 insertions(+)
create mode 100644 usrp/host/lib/usrp_basic_libusb.cc
(limited to 'usrp/host/lib/usrp_basic_libusb.cc')
diff --git a/usrp/host/lib/usrp_basic_libusb.cc b/usrp/host/lib/usrp_basic_libusb.cc
new file mode 100644
index 0000000000..296890b6c7
--- /dev/null
+++ b/usrp/host/lib/usrp_basic_libusb.cc
@@ -0,0 +1,146 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003,2004,2008,2009 Free Software Foundation, Inc.
+ *
+ * This file is part of GNU Radio
+ *
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ *
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING. If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <usrp/usrp_basic.h>
+#include "usrp/usrp_prims.h"
+#include "usrp_interfaces.h"
+#include "fpga_regs_common.h"
+#include "fpga_regs_standard.h"
+#include "fusb.h"
+#include "db_boards.h"
+#include <usb.h>
+#include <stdexcept>
+#include <assert.h>
+#include <math.h>
+#include <ad9862.h>
+#include <string.h>
+#include <cstdio>
+
+
+using namespace ad9862;
+
+#define NELEM(x) (sizeof (x) / sizeof (x[0]))
+
+// These set the buffer size used for each end point using the fast
+// usb interface. The kernel ends up locking down this much memory.
+
+static const int FUSB_BUFFER_SIZE = fusb_sysconfig::default_buffer_size();
+static const int FUSB_BLOCK_SIZE = fusb_sysconfig::max_block_size();
+static const int FUSB_NBLOCKS = FUSB_BUFFER_SIZE / FUSB_BLOCK_SIZE;
+
+
+static const double POLLING_INTERVAL = 0.1; // seconds
+
+
+//////////////////////////////////////////////////////////////////
+//
+// usrp_basic
+//
+////////////////////////////////////////////////////////////////
+
+
+// Given:
+// CLKIN = 64 MHz
+// CLKSEL pin = high
+//
+// These settings give us:
+// CLKOUT1 = CLKIN = 64 MHz
+// CLKOUT2 = CLKIN = 64 MHz
+// ADC is clocked at 64 MHz
+// DAC is clocked at 128 MHz
+
+static unsigned char common_regs[] = {
+ REG_GENERAL, 0,
+ REG_DLL, (DLL_DISABLE_INTERNAL_XTAL_OSC
+ | DLL_MULT_2X
+ | DLL_FAST),
+ REG_CLKOUT, CLKOUT2_EQ_DLL_OVER_2,
+ REG_AUX_ADC_CLK, AUX_ADC_CLK_CLK_OVER_4
+};
+
+
+usrp_basic::usrp_basic (int which_board,
+ struct usb_dev_handle *
+ open_interface (struct usb_device *dev),
+ const std::string fpga_filename,
+ const std::string firmware_filename)
+ : d_udh (0),
+ d_usb_data_rate (16000000), // SWAG, see below
+ d_bytes_per_poll ((int) (POLLING_INTERVAL * d_usb_data_rate)),
+ d_verbose (false), d_fpga_master_clock_freq(64000000), d_db(2)
+{
+ /*
+ * SWAG: Scientific Wild Ass Guess.
+ *
+ * d_usb_data_rate is used only to determine how often to poll for over- and under-runs.
+ * We defualt it to 1/2 of our best case. Classes derived from usrp_basic (e.g.,
+ * usrp_standard_tx and usrp_standard_rx) call set_usb_data_rate() to tell us the
+ * actual rate. This doesn't change our throughput, that's determined by the signal
+ * processing code in the FPGA (which we know nothing about), and the system limits
+ * determined by libusb, fusb_*, and the underlying drivers.
+ */
+ memset (d_fpga_shadows, 0, sizeof (d_fpga_shadows));
+
+ usrp_one_time_init ();
+
+ if (!usrp_load_standard_bits (which_board, false, fpga_filename, firmware_filename))
+ throw std::runtime_error ("usrp_basic/usrp_load_standard_bits");
+
+ struct usb_device *dev = usrp_find_device (which_board);
+ if (dev == 0){
+ fprintf (stderr, "usrp_basic: can't find usrp[%d]\n", which_board);
+ throw std::runtime_error ("usrp_basic/usrp_find_device");
+ }
+
+ if (!(usrp_usrp_p(dev) && usrp_hw_rev(dev) >= 1)){
+ fprintf (stderr, "usrp_basic: sorry, this code only works with USRP revs >= 1\n");
+ throw std::runtime_error ("usrp_basic/bad_rev");
+ }
+
+ if ((d_udh = open_interface (dev)) == 0)
+ throw std::runtime_error ("usrp_basic/open_interface");
+
+ // initialize registers that are common to rx and tx
+
+ if (!usrp_9862_write_many_all (d_udh, common_regs, sizeof (common_regs))){
+ fprintf (stderr, "usrp_basic: failed to init common AD9862 regs\n");
+ throw std::runtime_error ("usrp_basic/init_9862");
+ }
+
+ _write_fpga_reg (FR_MODE, 0); // ensure we're in normal mode
+ _write_fpga_reg (FR_DEBUG_EN, 0); // disable debug outputs
+}
+
+usrp_basic::~usrp_basic ()
+{
+ // shutdown_daughterboards(); // call from ~usrp_basic_{tx,rx}
+
+ d_db.resize(0); // forget db shared ptrs
+
+ if (d_udh)
+ usb_close (d_udh);
+}
+
--
cgit v1.2.3