From 4e7d048aeb80f95b19cebed9d76b79e6cbe64a9a Mon Sep 17 00:00:00 2001
From: eb <eb@221aa14e-8319-0410-a670-987f0aec2ac5>
Date: Thu, 13 Sep 2007 23:21:41 +0000
Subject: Merged r6329:6428 of features/inband-usb + distcheck fixes into
trunk.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6429 221aa14e-8319-0410-a670-987f0aec2ac5
---
usrp/fpga/inband_lib/rx_buffer_inband.v | 354 ++++++++++++++++----------------
1 file changed, 179 insertions(+), 175 deletions(-)
(limited to 'usrp/fpga/inband_lib/rx_buffer_inband.v')
diff --git a/usrp/fpga/inband_lib/rx_buffer_inband.v b/usrp/fpga/inband_lib/rx_buffer_inband.v
index c23ce09b79..1eaecabedd 100755
--- a/usrp/fpga/inband_lib/rx_buffer_inband.v
+++ b/usrp/fpga/inband_lib/rx_buffer_inband.v
@@ -1,175 +1,179 @@
-//`include "../../firmware/include/fpga_regs_common.v"
-//`include "../../firmware/include/fpga_regs_standard.v"
-module rx_buffer_inband
- ( input usbclk,
- input bus_reset,
- input reset, // DSP side reset (used here), do not reset registers
- input reset_regs, //Only reset registers
- output [15:0] usbdata,
- input RD,
- output wire have_pkt_rdy,
- output reg rx_overrun,
- input wire [3:0] channels,
- input wire [15:0] ch_0,
- input wire [15:0] ch_1,
- input wire [15:0] ch_2,
- input wire [15:0] ch_3,
- input wire [15:0] ch_4,
- input wire [15:0] ch_5,
- input wire [15:0] ch_6,
- input wire [15:0] ch_7,
- input rxclk,
- input rxstrobe,
- input clear_status,
- input [6:0] serial_addr,
- input [31:0] serial_data,
- input serial_strobe,
- output wire [15:0] debugbus,
-
- //Connection with tx_inband
- input rx_WR,
- input [15:0] rx_databus,
- input rx_WR_done,
- output reg rx_WR_enabled,
- //signal strength
- input wire [31:0] rssi_0, input wire [31:0] rssi_1,
- input wire [31:0] rssi_2, input wire [31:0] rssi_3
- );
-
- parameter NUM_CHAN = 1;
- genvar i ;
-
- // FX2 Bug Fix
- reg [8:0] read_count;
- always @(negedge usbclk)
- if(bus_reset)
- read_count <= #1 9'd0;
- else if(RD & ~read_count[8])
- read_count <= #1 read_count + 9'd1;
- else
- read_count <= #1 RD ? read_count : 9'b0;
-
- // Time counter
- reg [31:0] adctime;
- always @(posedge rxclk)
- if (reset)
- adctime <= 0;
- else if (rxstrobe)
- adctime <= adctime + 1;
-
- // USB side fifo
- wire [11:0] rdusedw;
- wire [11:0] wrusedw;
- wire [15:0] fifodata;
- wire WR;
- wire have_space;
-
- fifo_4kx16_dc rx_usb_fifo (
- .aclr ( reset ),
- .data ( fifodata ),
- .rdclk ( ~usbclk ),
- .rdreq ( RD & ~read_count[8] ),
- .wrclk ( rxclk ),
- .wrreq ( WR ),
- .q ( usbdata ),
- .rdempty ( ),
- .rdusedw ( rdusedw ),
- .wrfull ( ),
- .wrusedw ( wrusedw ) );
-
- assign have_pkt_rdy = (rdusedw >= 12'd256);
- assign have_space = (wrusedw < 12'd760);
-
- // Rx side fifos
- wire chan_rdreq;
- wire [15:0] chan_fifodata;
- wire [9:0] chan_usedw;
- wire [NUM_CHAN:0] chan_empty;
- wire [3:0] rd_select;
- wire [NUM_CHAN:0] rx_full;
-
- packet_builder #(NUM_CHAN) rx_pkt_builer (
- .rxclk ( rxclk ),
- .reset ( reset ),
- .adctime ( adctime ),
- .channels ( 4'd1 ),
- .chan_rdreq ( chan_rdreq ),
- .chan_fifodata ( chan_fifodata ),
- .chan_empty ( chan_empty ),
- .rd_select ( rd_select ),
- .chan_usedw ( chan_usedw ),
- .WR ( WR ),
- .fifodata ( fifodata ),
- .have_space ( have_space ),
- .rssi_0(rssi_0), .rssi_1(rssi_1),
- .rssi_2(rssi_2),.rssi_3(rssi_3), .debugbus(debug));
-
- // Detect overrun
- always @(posedge rxclk)
- if(reset)
- rx_overrun <= 1'b0;
- else if(rx_full[0])
- rx_overrun <= 1'b1;
- else if(clear_status)
- rx_overrun <= 1'b0;
-
- reg [6:0] test;
- always @(posedge rxclk)
- if (reset)
- test <= 0;
- else
- test <= test + 7'd1;
-
- // TODO write this genericly
- wire [15:0]ch[NUM_CHAN:0];
- assign ch[0] = ch_0;
-
- wire cmd_empty;
- always @(posedge rxclk)
- if(reset)
- rx_WR_enabled <= 1;
- else if(cmd_empty)
- rx_WR_enabled <= 1;
- else if(rx_WR_done)
- rx_WR_enabled <= 0;
-
- wire [15:0] dataout [0:NUM_CHAN];
- wire [9:0] usedw [0:NUM_CHAN];
-
- generate for (i = 0 ; i < NUM_CHAN; i = i + 1)
- begin : generate_channel_fifos
- wire rdreq;
-
- assign rdreq = (rd_select == i) & chan_rdreq;
- assign chan_empty[i] = usedw[i] < 10'd126;
-
- fifo_2kx16 rx_chan_fifo (
- .aclr ( reset ),
- .clock ( rxclk ),
- .data ( ch[i] ),
- .rdreq ( rdreq ),
- .wrreq ( ~rx_full[i] & rxstrobe),
- .empty ( ),
- .full ( rx_full[i] ),
- .q ( dataout[i]),
- .usedw ( usedw[i] )
- );
- end
- endgenerate
- wire [7:0] debug;
- fifo_2kx16 rx_cmd_fifo (
- .aclr ( reset ),
- .clock ( rxclk ),
- .data ( rx_databus ),
- .rdreq ( (rd_select == NUM_CHAN) & chan_rdreq ),
- .wrreq ( rx_WR & rx_WR_enabled),
- .empty ( cmd_empty),
- .full ( rx_full[NUM_CHAN] ),
- .q ( dataout[NUM_CHAN]),
- .usedw ( usedw[NUM_CHAN] )
- );
- assign chan_empty[NUM_CHAN] = cmd_empty | rx_WR_enabled;
- assign chan_fifodata = dataout[rd_select];
- assign chan_usedw = usedw[rd_select];
- assign debugbus = {wrusedw, have_space, RD, read_count[8], rxclk};
-endmodule
+//`include "../../firmware/include/fpga_regs_common.v"
+//`include "../../firmware/include/fpga_regs_standard.v"
+module rx_buffer_inband
+ ( input usbclk,
+ input bus_reset,
+ input reset, // DSP side reset (used here), do not reset registers
+ input reset_regs, //Only reset registers
+ output [15:0] usbdata,
+ input RD,
+ output wire have_pkt_rdy,
+ output reg rx_overrun,
+ input wire [3:0] channels,
+ input wire [15:0] ch_0,
+ input wire [15:0] ch_1,
+ input wire [15:0] ch_2,
+ input wire [15:0] ch_3,
+ input wire [15:0] ch_4,
+ input wire [15:0] ch_5,
+ input wire [15:0] ch_6,
+ input wire [15:0] ch_7,
+ input rxclk,
+ input rxstrobe,
+ input clear_status,
+ input [6:0] serial_addr,
+ input [31:0] serial_data,
+ input serial_strobe,
+ output wire [15:0] debugbus,
+
+ //Connection with tx_inband
+ input rx_WR,
+ input [15:0] rx_databus,
+ input rx_WR_done,
+ output reg rx_WR_enabled,
+ //signal strength
+ input wire [31:0] rssi_0, input wire [31:0] rssi_1,
+ input wire [31:0] rssi_2, input wire [31:0] rssi_3,
+ input wire [1:0] tx_overrun, input wire [1:0] tx_underrun
+ );
+
+ parameter NUM_CHAN = 1;
+ genvar i ;
+
+ // FX2 Bug Fix
+ reg [8:0] read_count;
+ always @(negedge usbclk)
+ if(bus_reset)
+ read_count <= #1 9'd0;
+ else if(RD & ~read_count[8])
+ read_count <= #1 read_count + 9'd1;
+ else
+ read_count <= #1 RD ? read_count : 9'b0;
+
+ // Time counter
+ reg [31:0] adctime;
+ always @(posedge rxclk)
+ if (reset)
+ adctime <= 0;
+ else if (rxstrobe)
+ adctime <= adctime + 1;
+
+ // USB side fifo
+ wire [11:0] rdusedw;
+ wire [11:0] wrusedw;
+ wire [15:0] fifodata;
+ wire WR;
+ wire have_space;
+
+ fifo_4kx16_dc rx_usb_fifo (
+ .aclr ( reset ),
+ .data ( fifodata ),
+ .rdclk ( ~usbclk ),
+ .rdreq ( RD & ~read_count[8] ),
+ .wrclk ( rxclk ),
+ .wrreq ( WR ),
+ .q ( usbdata ),
+ .rdempty ( ),
+ .rdusedw ( rdusedw ),
+ .wrfull ( ),
+ .wrusedw ( wrusedw ) );
+
+ assign have_pkt_rdy = (rdusedw >= 12'd256);
+ assign have_space = (wrusedw < 12'd760);
+
+ // Rx side fifos
+ wire chan_rdreq;
+ wire [15:0] chan_fifodata;
+ wire [9:0] chan_usedw;
+ wire [NUM_CHAN:0] chan_empty;
+ wire [3:0] rd_select;
+ wire [NUM_CHAN:0] rx_full;
+
+ packet_builder #(NUM_CHAN) rx_pkt_builer (
+ .rxclk ( rxclk ),
+ .reset ( reset ),
+ .adctime ( adctime ),
+ .channels ( 4'd1 ),
+ .chan_rdreq ( chan_rdreq ),
+ .chan_fifodata ( chan_fifodata ),
+ .chan_empty ( chan_empty ),
+ .rd_select ( rd_select ),
+ .chan_usedw ( chan_usedw ),
+ .WR ( WR ),
+ .fifodata ( fifodata ),
+ .have_space ( have_space ),
+ .rssi_0(rssi_0), .rssi_1(rssi_1),
+ .rssi_2(rssi_2),.rssi_3(rssi_3), .debugbus(debug),
+ .overrun(tx_overrun), .underrun(tx_underrun));
+
+ // Detect overrun
+ always @(posedge rxclk)
+ if(reset)
+ rx_overrun <= 1'b0;
+ else if(rx_full[0])
+ rx_overrun <= 1'b1;
+ else if(clear_status)
+ rx_overrun <= 1'b0;
+
+ reg [6:0] test;
+ always @(posedge rxclk)
+ if (reset)
+ test <= 0;
+ else
+ test <= test + 7'd1;
+
+ // TODO write this genericly
+ wire [15:0]ch[NUM_CHAN:0];
+ assign ch[0] = ch_0;
+
+ wire cmd_empty;
+ always @(posedge rxclk)
+ if(reset)
+ rx_WR_enabled <= 1;
+ else if(cmd_empty)
+ rx_WR_enabled <= 1;
+ else if(rx_WR_done)
+ rx_WR_enabled <= 0;
+
+ wire [15:0] dataout [0:NUM_CHAN];
+ wire [9:0] usedw [0:NUM_CHAN];
+ wire empty[0:NUM_CHAN];
+
+ generate for (i = 0 ; i < NUM_CHAN; i = i + 1)
+ begin : generate_channel_fifos
+ wire rdreq;
+
+ assign rdreq = (rd_select == i) & chan_rdreq;
+ //assign chan_empty[i] = usedw[i] < 10'd126;
+ fifo_1kx16 rx_chan_fifo (
+ .aclr ( reset ),
+ .clock ( rxclk ),
+ .data ( ch[i] ),
+ .rdreq ( rdreq ),
+ .wrreq ( ~rx_full[i] & rxstrobe),
+ .empty (empty[i]),
+ .full (rx_full[i]),
+ .q ( dataout[i]),
+ .usedw ( usedw[i]),
+ .almost_empty(chan_empty[i])
+ );
+ end
+ endgenerate
+ wire [7:0] debug;
+ fifo_1kx16 rx_cmd_fifo (
+ .aclr ( reset ),
+ .clock ( rxclk ),
+ .data ( rx_databus ),
+ .rdreq ( (rd_select == NUM_CHAN) & chan_rdreq ),
+ .wrreq ( rx_WR & rx_WR_enabled),
+ .empty ( cmd_empty),
+ .full ( rx_full[NUM_CHAN] ),
+ .q ( dataout[NUM_CHAN]),
+ .usedw ( usedw[NUM_CHAN] )
+ );
+ assign chan_empty[NUM_CHAN] = cmd_empty | rx_WR_enabled;
+ assign chan_fifodata = dataout[rd_select];
+ assign chan_usedw = usedw[rd_select];
+ assign debugbus = {rxstrobe, chan_rdreq, debug,
+ rx_full[0], chan_empty[0], empty[0], have_space, RD, rxclk};
+endmodule
--
cgit v1.2.3