From 7c23fd43214e8a729b3022db281dc85040f0e749 Mon Sep 17 00:00:00 2001
From: Josh Blum <josh@joshknows.com>
Date: Fri, 26 Feb 2010 15:17:38 -0800
Subject: Created simple source (with nothing in it) and some swig build stuff.
Seems to work and compile
---
gr-uhd/swig/Makefile.swig.gen | 259 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 259 insertions(+)
create mode 100644 gr-uhd/swig/Makefile.swig.gen
(limited to 'gr-uhd/swig/Makefile.swig.gen')
diff --git a/gr-uhd/swig/Makefile.swig.gen b/gr-uhd/swig/Makefile.swig.gen
new file mode 100644
index 0000000000..3804461a4e
--- /dev/null
+++ b/gr-uhd/swig/Makefile.swig.gen
@@ -0,0 +1,259 @@
+# -*- Makefile -*-
+#
+# Copyright 2009 Free Software Foundation, Inc.
+#
+# This file is part of GNU Radio
+#
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3, or (at your option)
+# any later version.
+#
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING. If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+#
+
+# Makefile.swig.gen for uhd_swig.i
+
+## Default install locations for these files:
+##
+## Default location for the Python directory is:
+## ${prefix}/lib/python${python_version}/site-packages/[category]/uhd_swig
+## Default location for the Python exec directory is:
+## ${exec_prefix}/lib/python${python_version}/site-packages/[category]/uhd_swig
+##
+## The following can be overloaded to change the install location, but
+## this has to be done in the including Makefile.am -before-
+## Makefile.swig is included.
+
+uhd_swig_pythondir_category ?= gnuradio/uhd_swig
+uhd_swig_pylibdir_category ?= $(uhd_swig_pythondir_category)
+uhd_swig_pythondir = $(pythondir)/$(uhd_swig_pythondir_category)
+uhd_swig_pylibdir = $(pyexecdir)/$(uhd_swig_pylibdir_category)
+
+## SWIG headers are always installed into the same directory.
+
+uhd_swig_swigincludedir = $(swigincludedir)
+
+## This is a template file for a "generated" Makefile addition (in
+## this case, "Makefile.swig.gen"). By including the top-level
+## Makefile.swig, this file will be used to generate the SWIG
+## dependencies. Assign the variable TOP_SWIG_FILES to be the list of
+## SWIG .i files to generated wrappings for; there can be more than 1
+## so long as the names are unique (no sorting is done on the
+## TOP_SWIG_FILES list). This file explicitly assumes that a SWIG .i
+## file will generate .cc, .py, and possibly .h files -- meaning that
+## all of these files will have the same base name (that provided for
+## the SWIG .i file).
+##
+## This code is setup to ensure parallel MAKE ("-j" or "-jN") does the
+## right thing. For more info, see <
+## http://sources.redhat.com/automake/automake.html#Multiple-Outputs >
+
+## Stamps used to ensure parallel make does the right thing. These
+## are removed by "make clean", but otherwise unused except during the
+## parallel built. These will not be included in a tarball, because
+## the SWIG-generated files will be removed from the distribution.
+
+STAMPS += $(DEPDIR)/uhd_swig-generate-*
+
+## Other cleaned files: dependency files generated by SWIG or this Makefile
+
+MOSTLYCLEANFILES += $(DEPDIR)/*.S*
+
+## Add the .py and .cc files to the list of SWIG built sources. The
+## .h file is sometimes built, but not always ... so that one has to
+## be added manually by the including Makefile.am .
+
+swig_built_sources += uhd_swig.py uhd_swig.cc
+
+## Various SWIG variables. These can be overloaded in the including
+## Makefile.am by setting the variable value there, then including
+## Makefile.swig .
+
+uhd_swig_swiginclude_HEADERS = \
+ uhd_swig.i \
+ $(uhd_swig_swiginclude_headers)
+
+uhd_swig_pylib_LTLIBRARIES = \
+ _uhd_swig.la
+
+_uhd_swig_la_SOURCES = \
+ uhd_swig.cc \
+ $(uhd_swig_la_swig_sources)
+
+_uhd_swig_la_LIBADD = \
+ $(STD_SWIG_LA_LIB_ADD) \
+ $(uhd_swig_la_swig_libadd)
+
+_uhd_swig_la_LDFLAGS = \
+ $(STD_SWIG_LA_LD_FLAGS) \
+ $(uhd_swig_la_swig_ldflags)
+
+_uhd_swig_la_CXXFLAGS = \
+ $(STD_SWIG_CXX_FLAGS) \
+ $(uhd_swig_la_swig_cxxflags)
+
+uhd_swig_python_PYTHON = \
+ uhd_swig.py \
+ $(uhd_swig_python)
+
+## Entry rule for running SWIG
+
+uhd_swig.h uhd_swig.py uhd_swig.cc: uhd_swig.i
+## This rule will get called only when MAKE decides that one of the
+## targets needs to be created or re-created, because:
+##
+## * The .i file is newer than any or all of the generated files;
+##
+## * Any or all of the .cc, .h, or .py files does not exist and is
+## needed (in the case this file is not needed, the rule for it is
+## ignored); or
+##
+## * Some SWIG-based dependecy of the .cc file isn't met and hence the
+## .cc file needs be be regenerated. Explanation: Because MAKE
+## knows how to handle dependencies for .cc files (regardless of
+## their name or extension), then the .cc file is used as a target
+## instead of the .i file -- but with the dependencies of the .i
+## file. It is this last reason why the line:
+##
+## if test -f $@; then :; else
+##
+## cannot be used in this case: If a .i file dependecy is not met,
+## then the .cc file needs to be rebuilt. But if the stamp is newer
+## than the .cc file, and the .cc file exists, then in the original
+## version (with the 'test' above) the internal MAKE call will not
+## be issued and hence the .cc file will not be rebuilt.
+##
+## Once execution gets to here, it should always proceed no matter the
+## state of a stamp (as discussed in link above). The
+## $(DEPDIR)/uhd_swig-generate stuff is used to allow for parallel
+## builds to "do the right thing". The stamp has no relationship with
+## either the target files or dependency file; it is used solely for
+## the protection of multiple builds during a given call to MAKE.
+##
+## Catch signals SIGHUP (1), SIGINT (2), SIGPIPE (13), and SIGTERM
+## (15). At a caught signal, the quoted command will be issued before
+## exiting. In this case, remove any stamp, whether temporary of not.
+## The trap is valid until the process exits; the process includes all
+## commands appended via "\"s.
+##
+ trap 'rm -rf $(DEPDIR)/uhd_swig-generate-*' 1 2 13 15; \
+##
+## Create a temporary directory, which acts as a lock. The first
+## process to create the directory will succeed and issue the MAKE
+## command to do the actual work, while all subsequent processes will
+## fail -- leading them to wait for the first process to finish.
+##
+ if mkdir $(DEPDIR)/uhd_swig-generate-lock 2>/dev/null; then \
+##
+## This code is being executed by the first process to succeed in
+## creating the directory lock.
+##
+## Remove the stamp associated with this filename.
+##
+ rm -f $(DEPDIR)/uhd_swig-generate-stamp; \
+##
+## Tell MAKE to run the rule for creating this stamp.
+##
+ $(MAKE) $(AM_MAKEFLAGS) $(DEPDIR)/uhd_swig-generate-stamp WHAT=$<; \
+##
+## Now that the .cc, .h, and .py files have been (re)created from the
+## .i file, future checking of this rule during the same MAKE
+## execution will come back that the rule doesn't need to be executed
+## because none of the conditions mentioned at the start of this rule
+## will be positive. Remove the the directory lock, which frees up
+## any waiting process(es) to continue.
+##
+ rmdir $(DEPDIR)/uhd_swig-generate-lock; \
+ else \
+##
+## This code is being executed by any follower processes while the
+## directory lock is in place.
+##
+## Wait until the first process is done, testing once per second.
+##
+ while test -d $(DEPDIR)/uhd_swig-generate-lock; do \
+ sleep 1; \
+ done; \
+##
+## Succeed if and only if the first process succeeded; exit this
+## process returning the status of the generated stamp.
+##
+ test -f $(DEPDIR)/uhd_swig-generate-stamp; \
+ exit $$?; \
+ fi;
+
+$(DEPDIR)/uhd_swig-generate-stamp:
+## This rule will be called only by the first process issuing the
+## above rule to succeed in creating the lock directory, after
+## removing the actual stamp file in order to guarantee that MAKE will
+## execute this rule.
+##
+## Call SWIG to generate the various output files; special
+## post-processing on 'mingw32' host OS for the dependency file.
+##
+ if $(SWIG) $(STD_SWIG_PYTHON_ARGS) $(uhd_swig_swig_args) \
+ -MD -MF $(DEPDIR)/uhd_swig.Std \
+ -module uhd_swig -o uhd_swig.cc $(WHAT); then \
+ if test $(host_os) = mingw32; then \
+ $(RM) $(DEPDIR)/uhd_swig.Sd; \
+ $(SED) 's,\\\\,/,g' < $(DEPDIR)/uhd_swig.Std \
+ > $(DEPDIR)/uhd_swig.Sd; \
+ $(RM) $(DEPDIR)/uhd_swig.Std; \
+ $(MV) $(DEPDIR)/uhd_swig.Sd $(DEPDIR)/uhd_swig.Std; \
+ fi; \
+ else \
+ $(RM) $(DEPDIR)/uhd_swig.S*; exit 1; \
+ fi;
+##
+## Mess with the SWIG output .Std dependency file, to create a
+## dependecy file valid for the input .i file: Basically, simulate the
+## dependency file created for libraries by GNU's libtool for C++,
+## where all of the dependencies for the target are first listed, then
+## each individual dependency is listed as a target with no further
+## dependencies.
+##
+## (1) remove the current dependency file
+##
+ $(RM) $(DEPDIR)/uhd_swig.d
+##
+## (2) Copy the whole SWIG file:
+##
+ cp $(DEPDIR)/uhd_swig.Std $(DEPDIR)/uhd_swig.d
+##
+## (3) all a carriage return to the end of the dependency file.
+##
+ echo "" >> $(DEPDIR)/uhd_swig.d
+##
+## (4) from the SWIG file, remove the first line (the target); remove
+## trailing " \" and " " from each line. Append ":" to each line,
+## followed by 2 carriage returns, then append this to the end of
+## the dependency file.
+##
+ $(SED) -e '1d;s, \\,,g;s, ,,g' < $(DEPDIR)/uhd_swig.Std | \
+ awk '{ printf "%s:\n\n", $$0 }' >> $(DEPDIR)/uhd_swig.d
+##
+## (5) remove the SWIG-generated file
+##
+ $(RM) $(DEPDIR)/uhd_swig.Std
+##
+## Create the stamp for this filename generation, to signal success in
+## executing this rule; allows other threads waiting on this process
+## to continue.
+##
+ touch $(DEPDIR)/uhd_swig-generate-stamp
+
+# KLUDGE: Force runtime include of a SWIG dependency file. This is
+# not guaranteed to be portable, but will probably work. If it works,
+# we have accurate dependencies for our swig stuff, which is good.
+
+@am__include@ @am__quote@./$(DEPDIR)/uhd_swig.d@am__quote@
+
--
cgit v1.2.3