From 7787d1fc1aecc7b59e476c31865b4f32348cb729 Mon Sep 17 00:00:00 2001
From: Josh Blum <josh@joshknows.com>
Date: Thu, 10 Feb 2011 00:56:55 -0800
Subject: uhd: replaced multi/single usrp stuff with just one usrp wrapper
---
gr-uhd/grc/gen_uhd_usrp_blocks.py | 307 ++++++++++++++++++++++++++++++++++++++
1 file changed, 307 insertions(+)
create mode 100644 gr-uhd/grc/gen_uhd_usrp_blocks.py
(limited to 'gr-uhd/grc/gen_uhd_usrp_blocks.py')
diff --git a/gr-uhd/grc/gen_uhd_usrp_blocks.py b/gr-uhd/grc/gen_uhd_usrp_blocks.py
new file mode 100644
index 0000000000..ec46334273
--- /dev/null
+++ b/gr-uhd/grc/gen_uhd_usrp_blocks.py
@@ -0,0 +1,307 @@
+"""
+Copyright 2010-2011 Free Software Foundation, Inc.
+
+This file is part of GNU Radio
+
+GNU Radio Companion is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License
+as published by the Free Software Foundation; either version 2
+of the License, or (at your option) any later version.
+
+GNU Radio Companion is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
+"""
+
+MAIN_TMPL = """\
+<?xml version="1.0"?>
+<block>
+ <name>UHD: USRP $sourk.title()</name>
+ <key>uhd_usrp_$(sourk)</key>
+ <import>from gnuradio import uhd</import>
+ <make>uhd.usrp_$(sourk)(
+ device_addr=\$dev_addr,
+ io_type=uhd.io_type.\$type.type,
+ num_channels=\$nchan,
+)
+\#if \$ref_clk()
+self.\$(id).set_clock_config(uhd.clock_config.external(), uhd.ALL_MBOARDS);
+\#end if
+\#if \$sync()
+self.\$(id).set_time_unknown_pps(uhd.time_spec())
+\#end if
+#for $m in range($max_mboards)
+\#if \$num_mboards() > $m and \$sd_spec$(m)()
+self.\$(id).set_subdev_spec(\$sd_spec$(m), $m)
+\#end if
+#end for
+self.\$(id).set_samp_rate(\$samp_rate)
+#for $n in range($max_nchan)
+\#if \$nchan() > $n
+self.\$(id).set_center_freq(\$center_freq$(n), $n)
+self.\$(id).set_gain(\$gain$(n), $n)
+ \#if \$ant$(n)()
+self.\$(id).set_antenna(\$ant$(n), $n)
+ \#end if
+ \#if \$bw$(n)()
+self.\$(id).set_bandwidth(\$bw$(n), $n)
+ \#end if
+\#end if
+#end for
+</make>
+ <callback>set_samp_rate(\$samp_rate)</callback>
+ #for $n in range($max_nchan)
+ <callback>set_center_freq(\$center_freq$(n), $n)</callback>
+ <callback>set_gain(\$gain$(n), $n)</callback>
+ <callback>set_antenna(\$ant$(n), $n)</callback>
+ <callback>set_bandwidth(\$bw$(n), $n)</callback>
+ #end for
+ <param>
+ <name>Input Type</name>
+ <key>type</key>
+ <type>enum</type>
+ <option>
+ <name>Complex</name>
+ <key>complex</key>
+ <opt>type:COMPLEX_FLOAT32</opt>
+ <opt>vlen:1</opt>
+ </option>
+ <option>
+ <name>Short</name>
+ <key>short</key>
+ <opt>type:COMPLEX_INT16</opt>
+ <opt>vlen:2</opt>
+ </option>
+ </param>
+ <param>
+ <name>Device Addr</name>
+ <key>dev_addr</key>
+ <value></value>
+ <type>string</type>
+ <hide>
+ \#if \$dev_addr()
+ none
+ \#else
+ part
+ \#end if
+ </hide>
+ </param>
+ <param>
+ <name>Ref Clock</name>
+ <key>ref_clk</key>
+ <value></value>
+ <type>enum</type>
+ <hide>\#if \$ref_clk() then 'none' else 'part'#</hide>
+ <option>
+ <name>External</name>
+ <key>ext</key>
+ </option>
+ <option>
+ <name>Internal</name>
+ <key></key>
+ </option>
+ </param>
+ <param>
+ <name>Sync</name>
+ <key>sync</key>
+ <value>sync</value>
+ <type>enum</type>
+ <hide>\#if \$sync() then 'none' else 'part'#</hide>
+ <option>
+ <name>unknown PPS</name>
+ <key>sync</key>
+ </option>
+ <option>
+ <name>don't sync</name>
+ <key></key>
+ </option>
+ </param>
+ <param>
+ <name>Num Mboards</name>
+ <key>num_mboards</key>
+ <value>1</value>
+ <type>int</type>
+ #for $m in range(1, $max_mboards+1)
+ <option>
+ <name>$(m)</name>
+ <key>$m</key>
+ </option>
+ #end for
+ </param>
+ #for $m in range($max_mboards)
+ <param>
+ <name>Mb$(m): Subdev Spec</name>
+ <key>sd_spec$(m)</key>
+ <value></value>
+ <type>string</type>
+ <hide>
+ \#if not \$num_mboards() > $m
+ all
+ \#elif \$sd_spec$(m)()
+ none
+ \#else
+ part
+ \#end if
+ </hide>
+ </param>
+ #end for
+ <param>
+ <name>Num Channels</name>
+ <key>nchan</key>
+ <value>2</value>
+ <type>int</type>
+ #for $n in range(1, $max_nchan+1)
+ <option>
+ <name>$(n)</name>
+ <key>$n</key>
+ </option>
+ #end for
+ </param>
+ <param>
+ <name>Samp Rate (Sps)</name>
+ <key>samp_rate</key>
+ <value>samp_rate</value>
+ <type>real</type>
+ </param>
+ $params
+ <check>$max_nchan >= \$nchan</check>
+ <check>\$nchan > 0</check>
+ <check>$max_mboards >= \$num_mboards</check>
+ <check>\$num_mboards > 0</check>
+ <check>\$nchan >= \$num_mboards</check>
+ <$sourk>
+ <name>$direction</name>
+ <type>\$type</type>
+ <vlen>\$type.vlen</vlen>
+ <nports>\$nchan</nports>
+ </$sourk>
+ <doc>
+The UHD USRP $sourk.title() Block:
+
+Device Address:
+The device address is a delimited string used to locate UHD devices on your system. \\
+If left blank, the first UHD device found will be used. \\
+Use the device address to specify a specific device or list of devices.
+USRP1 Example: serial=12345678
+USRP2 Example: addr=192.168.10.2
+USRP2 Example: addr0=192.168.10.2, addr1=192.168.10.3
+
+Num Motherboards:
+Selects the number of USRP motherboards in this device configuration.
+
+Subdevice specification:
+Each motherboard should have its own subdevice specification \\
+and all subdevice specifications should be the same length. \\
+Select the subdevice or subdevices for each channel using a markup string. \\
+The markup string consists of a list of dboard_slot:subdev_name pairs (one pair per channel). \\
+If left blank, the UHD will try to select the first subdevice on your system. \\
+See the application notes for further details.
+Single channel example: :AB
+Dual channel example: :A :B
+
+Num Channels:
+Selects the total number of channels in this multi-USRP configuration.
+Ex: 4 motherboards with 2 channels per board = 8 channels total
+
+Sample rate:
+The sample rate is the number of samples per second input by this block. \\
+The UHD device driver will try its best to match the requested sample rate. \\
+If the requested rate is not possible, the UHD block will print an error at runtime.
+
+Center frequency:
+The center frequency is the overall frequency of the RF chain. \\
+For greater control of how the UHD tunes elements in the RF chain, \\
+pass a tune_request object rather than a simple target frequency.
+Tuning with an LO offset example: uhd.tune_request(freq, lo_off)
+
+Antenna:
+For subdevices with only one antenna, this may be left blank. \\
+Otherwise, the user should specify one of the possible antenna choices. \\
+See the daughterboard application notes for the possible antenna choices.
+
+Bandwidth:
+To use the default bandwidth filter setting, this should be zero. \\
+Only certain subdevices have configurable bandwidth filters. \\
+See the daughterboard application notes for possible configurations.
+ </doc>
+</block>
+"""
+
+PARAMS_TMPL = """
+ <param>
+ <name>Ch$(n): Center Freq (Hz)</name>
+ <key>center_freq$(n)</key>
+ <value>0</value>
+ <type>real</type>
+ <hide>\#if \$nchan() > $n then 'none' else 'all'#</hide>
+ </param>
+ <param>
+ <name>Ch$(n): Gain (dB)</name>
+ <key>gain$(n)</key>
+ <value>0</value>
+ <type>real</type>
+ <hide>\#if \$nchan() > $n then 'none' else 'all'#</hide>
+ </param>
+ <param>
+ <name>Ch$(n): Antenna</name>
+ <key>ant$(n)</key>
+ <value></value>
+ <type>string</type>
+ <hide>
+ \#if not \$nchan() > $n
+ all
+ \#elif \$ant$(n)()
+ none
+ \#else
+ part
+ \#end if
+ </hide>
+ </param>
+ <param>
+ <name>Ch$(n): Bandwidth (Hz)</name>
+ <key>bw$(n)</key>
+ <value>0</value>
+ <type>real</type>
+ <hide>
+ \#if not \$nchan() > $n
+ all
+ \#elif \$bw$(n)()
+ none
+ \#else
+ part
+ \#end if
+ </hide>
+ </param>
+"""
+
+def parse_tmpl(_tmpl, **kwargs):
+ from Cheetah import Template
+ return str(Template.Template(_tmpl, kwargs))
+
+max_num_mboards = 4
+max_num_channels = max_num_mboards*4
+
+if __name__ == '__main__':
+ import sys
+ for file in sys.argv[1:]:
+ if 'source' in file:
+ sourk = 'source'
+ direction = 'out'
+ elif 'sink' in file:
+ sourk = 'sink'
+ direction = 'in'
+ else: raise Exception, 'is %s a source or sink?'%file
+
+ params = ''.join([parse_tmpl(PARAMS_TMPL, n=n) for n in range(max_num_channels)])
+ open(file, 'w').write(parse_tmpl(MAIN_TMPL,
+ max_nchan=max_num_channels,
+ max_mboards=max_num_mboards,
+ params=params,
+ sourk=sourk,
+ direction=direction,
+ ))
--
cgit v1.2.3
From 77f646ca0f578698ff5121a0b3360bd536f8d48d Mon Sep 17 00:00:00 2001
From: Josh Blum <josh@joshknows.com>
Date: Thu, 10 Feb 2011 12:07:11 -0800
Subject: uhd: tweaks to the grc blocks
---
gr-uhd/grc/gen_uhd_usrp_blocks.py | 2 +-
gr-uhd/grc/uhd_usrp_sink.xml | 4 ++--
gr-uhd/grc/uhd_usrp_source.xml | 4 ++--
3 files changed, 5 insertions(+), 5 deletions(-)
(limited to 'gr-uhd/grc/gen_uhd_usrp_blocks.py')
diff --git a/gr-uhd/grc/gen_uhd_usrp_blocks.py b/gr-uhd/grc/gen_uhd_usrp_blocks.py
index ec46334273..ee8d692dd1 100644
--- a/gr-uhd/grc/gen_uhd_usrp_blocks.py
+++ b/gr-uhd/grc/gen_uhd_usrp_blocks.py
@@ -153,7 +153,7 @@ self.\$(id).set_bandwidth(\$bw$(n), $n)
<param>
<name>Num Channels</name>
<key>nchan</key>
- <value>2</value>
+ <value>1</value>
<type>int</type>
#for $n in range(1, $max_nchan+1)
<option>
diff --git a/gr-uhd/grc/uhd_usrp_sink.xml b/gr-uhd/grc/uhd_usrp_sink.xml
index 219504ecd4..2b8e89d57f 100644
--- a/gr-uhd/grc/uhd_usrp_sink.xml
+++ b/gr-uhd/grc/uhd_usrp_sink.xml
@@ -3,7 +3,7 @@
<name>UHD: USRP Sink</name>
<key>uhd_usrp_sink</key>
<import>from gnuradio import uhd</import>
- <make>uhd.multi_usrp_sink(
+ <make>uhd.usrp_sink(
device_addr=$dev_addr,
io_type=uhd.io_type.$type.type,
num_channels=$nchan,
@@ -398,7 +398,7 @@ self.$(id).set_bandwidth($bw15, 15)
<param>
<name>Num Channels</name>
<key>nchan</key>
- <value>2</value>
+ <value>1</value>
<type>int</type>
<option>
<name>1</name>
diff --git a/gr-uhd/grc/uhd_usrp_source.xml b/gr-uhd/grc/uhd_usrp_source.xml
index d90bda9936..d86ad3fb74 100644
--- a/gr-uhd/grc/uhd_usrp_source.xml
+++ b/gr-uhd/grc/uhd_usrp_source.xml
@@ -3,7 +3,7 @@
<name>UHD: USRP Source</name>
<key>uhd_usrp_source</key>
<import>from gnuradio import uhd</import>
- <make>uhd.multi_usrp_source(
+ <make>uhd.usrp_source(
device_addr=$dev_addr,
io_type=uhd.io_type.$type.type,
num_channels=$nchan,
@@ -398,7 +398,7 @@ self.$(id).set_bandwidth($bw15, 15)
<param>
<name>Num Channels</name>
<key>nchan</key>
- <value>2</value>
+ <value>1</value>
<type>int</type>
<option>
<name>1</name>
--
cgit v1.2.3
From 8c1ff29bf925728b323f7036ca4ab09fec5e18df Mon Sep 17 00:00:00 2001
From: Josh Blum <josh@joshknows.com>
Date: Thu, 10 Feb 2011 12:34:49 -0800
Subject: uhd: added set and get clock rates to gr-uhd blocks and grc wrappers
---
gr-uhd/grc/.gitignore | 3 +-
gr-uhd/grc/gen_uhd_usrp_blocks.py | 18 +-
gr-uhd/grc/uhd_usrp_sink.xml | 1255 -----------------------------------
gr-uhd/grc/uhd_usrp_source.xml | 1255 -----------------------------------
gr-uhd/include/gr_uhd_usrp_sink.h | 14 +
gr-uhd/include/gr_uhd_usrp_source.h | 14 +
gr-uhd/lib/gr_uhd_usrp_sink.cc | 8 +
gr-uhd/lib/gr_uhd_usrp_source.cc | 8 +
8 files changed, 61 insertions(+), 2514 deletions(-)
delete mode 100644 gr-uhd/grc/uhd_usrp_sink.xml
delete mode 100644 gr-uhd/grc/uhd_usrp_source.xml
(limited to 'gr-uhd/grc/gen_uhd_usrp_blocks.py')
diff --git a/gr-uhd/grc/.gitignore b/gr-uhd/grc/.gitignore
index d8ab9bd0c3..797c54ae7b 100644
--- a/gr-uhd/grc/.gitignore
+++ b/gr-uhd/grc/.gitignore
@@ -1,4 +1,3 @@
-/uhd_multi*.xml
-/uhd_single*.xml
+/uhd_usrp*.xml
/Makefile
/Makefile.in
diff --git a/gr-uhd/grc/gen_uhd_usrp_blocks.py b/gr-uhd/grc/gen_uhd_usrp_blocks.py
index ee8d692dd1..831d69fc4c 100644
--- a/gr-uhd/grc/gen_uhd_usrp_blocks.py
+++ b/gr-uhd/grc/gen_uhd_usrp_blocks.py
@@ -30,11 +30,14 @@ MAIN_TMPL = """\
num_channels=\$nchan,
)
\#if \$ref_clk()
-self.\$(id).set_clock_config(uhd.clock_config.external(), uhd.ALL_MBOARDS);
+self.\$(id).set_clock_config(uhd.clock_config.external(), uhd.ALL_MBOARDS)
\#end if
\#if \$sync()
self.\$(id).set_time_unknown_pps(uhd.time_spec())
\#end if
+\#if \$clock_rate()
+self.\$(id).set_clock_rate(\$clock_rate, uhd.ALL_MBOARDS)
+\#end if
#for $m in range($max_mboards)
\#if \$num_mboards() > $m and \$sd_spec$(m)()
self.\$(id).set_subdev_spec(\$sd_spec$(m), $m)
@@ -109,7 +112,7 @@ self.\$(id).set_bandwidth(\$bw$(n), $n)
<param>
<name>Sync</name>
<key>sync</key>
- <value>sync</value>
+ <value></value>
<type>enum</type>
<hide>\#if \$sync() then 'none' else 'part'#</hide>
<option>
@@ -121,6 +124,17 @@ self.\$(id).set_bandwidth(\$bw$(n), $n)
<key></key>
</option>
</param>
+ <param>
+ <name>Clock Rate (Hz)</name>
+ <key>clock_rate</key>
+ <value>0.0</value>
+ <type>real</type>
+ <hide>\#if \$clock_rate() then 'none' else 'part'#</hide>
+ <option>
+ <name>Default</name>
+ <key>0.0</key>
+ </option>
+ </param>
<param>
<name>Num Mboards</name>
<key>num_mboards</key>
diff --git a/gr-uhd/grc/uhd_usrp_sink.xml b/gr-uhd/grc/uhd_usrp_sink.xml
deleted file mode 100644
index 2b8e89d57f..0000000000
--- a/gr-uhd/grc/uhd_usrp_sink.xml
+++ /dev/null
@@ -1,1255 +0,0 @@
-<?xml version="1.0"?>
-<block>
- <name>UHD: USRP Sink</name>
- <key>uhd_usrp_sink</key>
- <import>from gnuradio import uhd</import>
- <make>uhd.usrp_sink(
- device_addr=$dev_addr,
- io_type=uhd.io_type.$type.type,
- num_channels=$nchan,
-)
-#if $ref_clk()
-self.$(id).set_clock_config(uhd.clock_config.external(), uhd.ALL_MBOARDS);
-#end if
-#if $sync()
-self.$(id).set_time_unknown_pps(uhd.time_spec())
-#end if
-#if $num_mboards() > 0 and $sd_spec0()
-self.$(id).set_subdev_spec($sd_spec0, 0)
-#end if
-#if $num_mboards() > 1 and $sd_spec1()
-self.$(id).set_subdev_spec($sd_spec1, 1)
-#end if
-#if $num_mboards() > 2 and $sd_spec2()
-self.$(id).set_subdev_spec($sd_spec2, 2)
-#end if
-#if $num_mboards() > 3 and $sd_spec3()
-self.$(id).set_subdev_spec($sd_spec3, 3)
-#end if
-self.$(id).set_samp_rate($samp_rate)
-#if $nchan() > 0
-self.$(id).set_center_freq($center_freq0, 0)
-self.$(id).set_gain($gain0, 0)
- #if $ant0()
-self.$(id).set_antenna($ant0, 0)
- #end if
- #if $bw0()
-self.$(id).set_bandwidth($bw0, 0)
- #end if
-#end if
-#if $nchan() > 1
-self.$(id).set_center_freq($center_freq1, 1)
-self.$(id).set_gain($gain1, 1)
- #if $ant1()
-self.$(id).set_antenna($ant1, 1)
- #end if
- #if $bw1()
-self.$(id).set_bandwidth($bw1, 1)
- #end if
-#end if
-#if $nchan() > 2
-self.$(id).set_center_freq($center_freq2, 2)
-self.$(id).set_gain($gain2, 2)
- #if $ant2()
-self.$(id).set_antenna($ant2, 2)
- #end if
- #if $bw2()
-self.$(id).set_bandwidth($bw2, 2)
- #end if
-#end if
-#if $nchan() > 3
-self.$(id).set_center_freq($center_freq3, 3)
-self.$(id).set_gain($gain3, 3)
- #if $ant3()
-self.$(id).set_antenna($ant3, 3)
- #end if
- #if $bw3()
-self.$(id).set_bandwidth($bw3, 3)
- #end if
-#end if
-#if $nchan() > 4
-self.$(id).set_center_freq($center_freq4, 4)
-self.$(id).set_gain($gain4, 4)
- #if $ant4()
-self.$(id).set_antenna($ant4, 4)
- #end if
- #if $bw4()
-self.$(id).set_bandwidth($bw4, 4)
- #end if
-#end if
-#if $nchan() > 5
-self.$(id).set_center_freq($center_freq5, 5)
-self.$(id).set_gain($gain5, 5)
- #if $ant5()
-self.$(id).set_antenna($ant5, 5)
- #end if
- #if $bw5()
-self.$(id).set_bandwidth($bw5, 5)
- #end if
-#end if
-#if $nchan() > 6
-self.$(id).set_center_freq($center_freq6, 6)
-self.$(id).set_gain($gain6, 6)
- #if $ant6()
-self.$(id).set_antenna($ant6, 6)
- #end if
- #if $bw6()
-self.$(id).set_bandwidth($bw6, 6)
- #end if
-#end if
-#if $nchan() > 7
-self.$(id).set_center_freq($center_freq7, 7)
-self.$(id).set_gain($gain7, 7)
- #if $ant7()
-self.$(id).set_antenna($ant7, 7)
- #end if
- #if $bw7()
-self.$(id).set_bandwidth($bw7, 7)
- #end if
-#end if
-#if $nchan() > 8
-self.$(id).set_center_freq($center_freq8, 8)
-self.$(id).set_gain($gain8, 8)
- #if $ant8()
-self.$(id).set_antenna($ant8, 8)
- #end if
- #if $bw8()
-self.$(id).set_bandwidth($bw8, 8)
- #end if
-#end if
-#if $nchan() > 9
-self.$(id).set_center_freq($center_freq9, 9)
-self.$(id).set_gain($gain9, 9)
- #if $ant9()
-self.$(id).set_antenna($ant9, 9)
- #end if
- #if $bw9()
-self.$(id).set_bandwidth($bw9, 9)
- #end if
-#end if
-#if $nchan() > 10
-self.$(id).set_center_freq($center_freq10, 10)
-self.$(id).set_gain($gain10, 10)
- #if $ant10()
-self.$(id).set_antenna($ant10, 10)
- #end if
- #if $bw10()
-self.$(id).set_bandwidth($bw10, 10)
- #end if
-#end if
-#if $nchan() > 11
-self.$(id).set_center_freq($center_freq11, 11)
-self.$(id).set_gain($gain11, 11)
- #if $ant11()
-self.$(id).set_antenna($ant11, 11)
- #end if
- #if $bw11()
-self.$(id).set_bandwidth($bw11, 11)
- #end if
-#end if
-#if $nchan() > 12
-self.$(id).set_center_freq($center_freq12, 12)
-self.$(id).set_gain($gain12, 12)
- #if $ant12()
-self.$(id).set_antenna($ant12, 12)
- #end if
- #if $bw12()
-self.$(id).set_bandwidth($bw12, 12)
- #end if
-#end if
-#if $nchan() > 13
-self.$(id).set_center_freq($center_freq13, 13)
-self.$(id).set_gain($gain13, 13)
- #if $ant13()
-self.$(id).set_antenna($ant13, 13)
- #end if
- #if $bw13()
-self.$(id).set_bandwidth($bw13, 13)
- #end if
-#end if
-#if $nchan() > 14
-self.$(id).set_center_freq($center_freq14, 14)
-self.$(id).set_gain($gain14, 14)
- #if $ant14()
-self.$(id).set_antenna($ant14, 14)
- #end if
- #if $bw14()
-self.$(id).set_bandwidth($bw14, 14)
- #end if
-#end if
-#if $nchan() > 15
-self.$(id).set_center_freq($center_freq15, 15)
-self.$(id).set_gain($gain15, 15)
- #if $ant15()
-self.$(id).set_antenna($ant15, 15)
- #end if
- #if $bw15()
-self.$(id).set_bandwidth($bw15, 15)
- #end if
-#end if
-</make>
- <callback>set_samp_rate($samp_rate)</callback>
- <callback>set_center_freq($center_freq0, 0)</callback>
- <callback>set_gain($gain0, 0)</callback>
- <callback>set_antenna($ant0, 0)</callback>
- <callback>set_bandwidth($bw0, 0)</callback>
- <callback>set_center_freq($center_freq1, 1)</callback>
- <callback>set_gain($gain1, 1)</callback>
- <callback>set_antenna($ant1, 1)</callback>
- <callback>set_bandwidth($bw1, 1)</callback>
- <callback>set_center_freq($center_freq2, 2)</callback>
- <callback>set_gain($gain2, 2)</callback>
- <callback>set_antenna($ant2, 2)</callback>
- <callback>set_bandwidth($bw2, 2)</callback>
- <callback>set_center_freq($center_freq3, 3)</callback>
- <callback>set_gain($gain3, 3)</callback>
- <callback>set_antenna($ant3, 3)</callback>
- <callback>set_bandwidth($bw3, 3)</callback>
- <callback>set_center_freq($center_freq4, 4)</callback>
- <callback>set_gain($gain4, 4)</callback>
- <callback>set_antenna($ant4, 4)</callback>
- <callback>set_bandwidth($bw4, 4)</callback>
- <callback>set_center_freq($center_freq5, 5)</callback>
- <callback>set_gain($gain5, 5)</callback>
- <callback>set_antenna($ant5, 5)</callback>
- <callback>set_bandwidth($bw5, 5)</callback>
- <callback>set_center_freq($center_freq6, 6)</callback>
- <callback>set_gain($gain6, 6)</callback>
- <callback>set_antenna($ant6, 6)</callback>
- <callback>set_bandwidth($bw6, 6)</callback>
- <callback>set_center_freq($center_freq7, 7)</callback>
- <callback>set_gain($gain7, 7)</callback>
- <callback>set_antenna($ant7, 7)</callback>
- <callback>set_bandwidth($bw7, 7)</callback>
- <callback>set_center_freq($center_freq8, 8)</callback>
- <callback>set_gain($gain8, 8)</callback>
- <callback>set_antenna($ant8, 8)</callback>
- <callback>set_bandwidth($bw8, 8)</callback>
- <callback>set_center_freq($center_freq9, 9)</callback>
- <callback>set_gain($gain9, 9)</callback>
- <callback>set_antenna($ant9, 9)</callback>
- <callback>set_bandwidth($bw9, 9)</callback>
- <callback>set_center_freq($center_freq10, 10)</callback>
- <callback>set_gain($gain10, 10)</callback>
- <callback>set_antenna($ant10, 10)</callback>
- <callback>set_bandwidth($bw10, 10)</callback>
- <callback>set_center_freq($center_freq11, 11)</callback>
- <callback>set_gain($gain11, 11)</callback>
- <callback>set_antenna($ant11, 11)</callback>
- <callback>set_bandwidth($bw11, 11)</callback>
- <callback>set_center_freq($center_freq12, 12)</callback>
- <callback>set_gain($gain12, 12)</callback>
- <callback>set_antenna($ant12, 12)</callback>
- <callback>set_bandwidth($bw12, 12)</callback>
- <callback>set_center_freq($center_freq13, 13)</callback>
- <callback>set_gain($gain13, 13)</callback>
- <callback>set_antenna($ant13, 13)</callback>
- <callback>set_bandwidth($bw13, 13)</callback>
- <callback>set_center_freq($center_freq14, 14)</callback>
- <callback>set_gain($gain14, 14)</callback>
- <callback>set_antenna($ant14, 14)</callback>
- <callback>set_bandwidth($bw14, 14)</callback>
- <callback>set_center_freq($center_freq15, 15)</callback>
- <callback>set_gain($gain15, 15)</callback>
- <callback>set_antenna($ant15, 15)</callback>
- <callback>set_bandwidth($bw15, 15)</callback>
- <param>
- <name>Input Type</name>
- <key>type</key>
- <type>enum</type>
- <option>
- <name>Complex</name>
- <key>complex</key>
- <opt>type:COMPLEX_FLOAT32</opt>
- <opt>vlen:1</opt>
- </option>
- <option>
- <name>Short</name>
- <key>short</key>
- <opt>type:COMPLEX_INT16</opt>
- <opt>vlen:2</opt>
- </option>
- </param>
- <param>
- <name>Device Addr</name>
- <key>dev_addr</key>
- <value></value>
- <type>string</type>
- <hide>
- #if $dev_addr()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ref Clock</name>
- <key>ref_clk</key>
- <value></value>
- <type>enum</type>
- <hide>#if $ref_clk() then 'none' else 'part'#</hide>
- <option>
- <name>External</name>
- <key>ext</key>
- </option>
- <option>
- <name>Internal</name>
- <key></key>
- </option>
- </param>
- <param>
- <name>Sync</name>
- <key>sync</key>
- <value>sync</value>
- <type>enum</type>
- <hide>#if $sync() then 'none' else 'part'#</hide>
- <option>
- <name>unknown PPS</name>
- <key>sync</key>
- </option>
- <option>
- <name>don't sync</name>
- <key></key>
- </option>
- </param>
- <param>
- <name>Num Mboards</name>
- <key>num_mboards</key>
- <value>1</value>
- <type>int</type>
- <option>
- <name>1</name>
- <key>1</key>
- </option>
- <option>
- <name>2</name>
- <key>2</key>
- </option>
- <option>
- <name>3</name>
- <key>3</key>
- </option>
- <option>
- <name>4</name>
- <key>4</key>
- </option>
- </param>
- <param>
- <name>Mb0: Subdev Spec</name>
- <key>sd_spec0</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $num_mboards() > 0
- all
- #elif $sd_spec0()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Mb1: Subdev Spec</name>
- <key>sd_spec1</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $num_mboards() > 1
- all
- #elif $sd_spec1()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Mb2: Subdev Spec</name>
- <key>sd_spec2</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $num_mboards() > 2
- all
- #elif $sd_spec2()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Mb3: Subdev Spec</name>
- <key>sd_spec3</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $num_mboards() > 3
- all
- #elif $sd_spec3()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Num Channels</name>
- <key>nchan</key>
- <value>1</value>
- <type>int</type>
- <option>
- <name>1</name>
- <key>1</key>
- </option>
- <option>
- <name>2</name>
- <key>2</key>
- </option>
- <option>
- <name>3</name>
- <key>3</key>
- </option>
- <option>
- <name>4</name>
- <key>4</key>
- </option>
- <option>
- <name>5</name>
- <key>5</key>
- </option>
- <option>
- <name>6</name>
- <key>6</key>
- </option>
- <option>
- <name>7</name>
- <key>7</key>
- </option>
- <option>
- <name>8</name>
- <key>8</key>
- </option>
- <option>
- <name>9</name>
- <key>9</key>
- </option>
- <option>
- <name>10</name>
- <key>10</key>
- </option>
- <option>
- <name>11</name>
- <key>11</key>
- </option>
- <option>
- <name>12</name>
- <key>12</key>
- </option>
- <option>
- <name>13</name>
- <key>13</key>
- </option>
- <option>
- <name>14</name>
- <key>14</key>
- </option>
- <option>
- <name>15</name>
- <key>15</key>
- </option>
- <option>
- <name>16</name>
- <key>16</key>
- </option>
- </param>
- <param>
- <name>Samp Rate (Sps)</name>
- <key>samp_rate</key>
- <value>samp_rate</value>
- <type>real</type>
- </param>
-
- <param>
- <name>Ch0: Center Freq (Hz)</name>
- <key>center_freq0</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 0 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch0: Gain (dB)</name>
- <key>gain0</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 0 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch0: Antenna</name>
- <key>ant0</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 0
- all
- #elif $ant0()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch0: Bandwidth (Hz)</name>
- <key>bw0</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 0
- all
- #elif $bw0()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch1: Center Freq (Hz)</name>
- <key>center_freq1</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 1 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch1: Gain (dB)</name>
- <key>gain1</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 1 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch1: Antenna</name>
- <key>ant1</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 1
- all
- #elif $ant1()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch1: Bandwidth (Hz)</name>
- <key>bw1</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 1
- all
- #elif $bw1()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch2: Center Freq (Hz)</name>
- <key>center_freq2</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 2 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch2: Gain (dB)</name>
- <key>gain2</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 2 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch2: Antenna</name>
- <key>ant2</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 2
- all
- #elif $ant2()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch2: Bandwidth (Hz)</name>
- <key>bw2</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 2
- all
- #elif $bw2()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch3: Center Freq (Hz)</name>
- <key>center_freq3</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 3 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch3: Gain (dB)</name>
- <key>gain3</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 3 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch3: Antenna</name>
- <key>ant3</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 3
- all
- #elif $ant3()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch3: Bandwidth (Hz)</name>
- <key>bw3</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 3
- all
- #elif $bw3()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch4: Center Freq (Hz)</name>
- <key>center_freq4</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 4 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch4: Gain (dB)</name>
- <key>gain4</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 4 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch4: Antenna</name>
- <key>ant4</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 4
- all
- #elif $ant4()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch4: Bandwidth (Hz)</name>
- <key>bw4</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 4
- all
- #elif $bw4()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch5: Center Freq (Hz)</name>
- <key>center_freq5</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 5 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch5: Gain (dB)</name>
- <key>gain5</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 5 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch5: Antenna</name>
- <key>ant5</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 5
- all
- #elif $ant5()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch5: Bandwidth (Hz)</name>
- <key>bw5</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 5
- all
- #elif $bw5()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch6: Center Freq (Hz)</name>
- <key>center_freq6</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 6 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch6: Gain (dB)</name>
- <key>gain6</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 6 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch6: Antenna</name>
- <key>ant6</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 6
- all
- #elif $ant6()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch6: Bandwidth (Hz)</name>
- <key>bw6</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 6
- all
- #elif $bw6()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch7: Center Freq (Hz)</name>
- <key>center_freq7</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 7 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch7: Gain (dB)</name>
- <key>gain7</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 7 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch7: Antenna</name>
- <key>ant7</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 7
- all
- #elif $ant7()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch7: Bandwidth (Hz)</name>
- <key>bw7</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 7
- all
- #elif $bw7()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch8: Center Freq (Hz)</name>
- <key>center_freq8</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 8 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch8: Gain (dB)</name>
- <key>gain8</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 8 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch8: Antenna</name>
- <key>ant8</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 8
- all
- #elif $ant8()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch8: Bandwidth (Hz)</name>
- <key>bw8</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 8
- all
- #elif $bw8()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch9: Center Freq (Hz)</name>
- <key>center_freq9</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 9 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch9: Gain (dB)</name>
- <key>gain9</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 9 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch9: Antenna</name>
- <key>ant9</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 9
- all
- #elif $ant9()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch9: Bandwidth (Hz)</name>
- <key>bw9</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 9
- all
- #elif $bw9()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch10: Center Freq (Hz)</name>
- <key>center_freq10</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 10 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch10: Gain (dB)</name>
- <key>gain10</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 10 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch10: Antenna</name>
- <key>ant10</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 10
- all
- #elif $ant10()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch10: Bandwidth (Hz)</name>
- <key>bw10</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 10
- all
- #elif $bw10()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch11: Center Freq (Hz)</name>
- <key>center_freq11</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 11 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch11: Gain (dB)</name>
- <key>gain11</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 11 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch11: Antenna</name>
- <key>ant11</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 11
- all
- #elif $ant11()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch11: Bandwidth (Hz)</name>
- <key>bw11</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 11
- all
- #elif $bw11()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch12: Center Freq (Hz)</name>
- <key>center_freq12</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 12 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch12: Gain (dB)</name>
- <key>gain12</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 12 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch12: Antenna</name>
- <key>ant12</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 12
- all
- #elif $ant12()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch12: Bandwidth (Hz)</name>
- <key>bw12</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 12
- all
- #elif $bw12()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch13: Center Freq (Hz)</name>
- <key>center_freq13</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 13 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch13: Gain (dB)</name>
- <key>gain13</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 13 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch13: Antenna</name>
- <key>ant13</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 13
- all
- #elif $ant13()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch13: Bandwidth (Hz)</name>
- <key>bw13</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 13
- all
- #elif $bw13()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch14: Center Freq (Hz)</name>
- <key>center_freq14</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 14 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch14: Gain (dB)</name>
- <key>gain14</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 14 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch14: Antenna</name>
- <key>ant14</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 14
- all
- #elif $ant14()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch14: Bandwidth (Hz)</name>
- <key>bw14</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 14
- all
- #elif $bw14()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch15: Center Freq (Hz)</name>
- <key>center_freq15</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 15 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch15: Gain (dB)</name>
- <key>gain15</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 15 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch15: Antenna</name>
- <key>ant15</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 15
- all
- #elif $ant15()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch15: Bandwidth (Hz)</name>
- <key>bw15</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 15
- all
- #elif $bw15()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <check>16 >= $nchan</check>
- <check>$nchan > 0</check>
- <check>4 >= $num_mboards</check>
- <check>$num_mboards > 0</check>
- <check>$nchan >= $num_mboards</check>
- <sink>
- <name>in</name>
- <type>$type</type>
- <vlen>$type.vlen</vlen>
- <nports>$nchan</nports>
- </sink>
- <doc>
-The UHD USRP Sink Block:
-
-Device Address:
-The device address is a delimited string used to locate UHD devices on your system. \
-If left blank, the first UHD device found will be used. \
-Use the device address to specify a specific device or list of devices.
-USRP1 Example: serial=12345678
-USRP2 Example: addr=192.168.10.2
-USRP2 Example: addr0=192.168.10.2, addr1=192.168.10.3
-
-Num Motherboards:
-Selects the number of USRP motherboards in this device configuration.
-
-Subdevice specification:
-Each motherboard should have its own subdevice specification \
-and all subdevice specifications should be the same length. \
-Select the subdevice or subdevices for each channel using a markup string. \
-The markup string consists of a list of dboard_slot:subdev_name pairs (one pair per channel). \
-If left blank, the UHD will try to select the first subdevice on your system. \
-See the application notes for further details.
-Single channel example: :AB
-Dual channel example: :A :B
-
-Num Channels:
-Selects the total number of channels in this multi-USRP configuration.
-Ex: 4 motherboards with 2 channels per board = 8 channels total
-
-Sample rate:
-The sample rate is the number of samples per second input by this block. \
-The UHD device driver will try its best to match the requested sample rate. \
-If the requested rate is not possible, the UHD block will print an error at runtime.
-
-Center frequency:
-The center frequency is the overall frequency of the RF chain. \
-For greater control of how the UHD tunes elements in the RF chain, \
-pass a tune_request object rather than a simple target frequency.
-Tuning with an LO offset example: uhd.tune_request(freq, lo_off)
-
-Antenna:
-For subdevices with only one antenna, this may be left blank. \
-Otherwise, the user should specify one of the possible antenna choices. \
-See the daughterboard application notes for the possible antenna choices.
-
-Bandwidth:
-To use the default bandwidth filter setting, this should be zero. \
-Only certain subdevices have configurable bandwidth filters. \
-See the daughterboard application notes for possible configurations.
- </doc>
-</block>
diff --git a/gr-uhd/grc/uhd_usrp_source.xml b/gr-uhd/grc/uhd_usrp_source.xml
deleted file mode 100644
index d86ad3fb74..0000000000
--- a/gr-uhd/grc/uhd_usrp_source.xml
+++ /dev/null
@@ -1,1255 +0,0 @@
-<?xml version="1.0"?>
-<block>
- <name>UHD: USRP Source</name>
- <key>uhd_usrp_source</key>
- <import>from gnuradio import uhd</import>
- <make>uhd.usrp_source(
- device_addr=$dev_addr,
- io_type=uhd.io_type.$type.type,
- num_channels=$nchan,
-)
-#if $ref_clk()
-self.$(id).set_clock_config(uhd.clock_config.external(), uhd.ALL_MBOARDS);
-#end if
-#if $sync()
-self.$(id).set_time_unknown_pps(uhd.time_spec())
-#end if
-#if $num_mboards() > 0 and $sd_spec0()
-self.$(id).set_subdev_spec($sd_spec0, 0)
-#end if
-#if $num_mboards() > 1 and $sd_spec1()
-self.$(id).set_subdev_spec($sd_spec1, 1)
-#end if
-#if $num_mboards() > 2 and $sd_spec2()
-self.$(id).set_subdev_spec($sd_spec2, 2)
-#end if
-#if $num_mboards() > 3 and $sd_spec3()
-self.$(id).set_subdev_spec($sd_spec3, 3)
-#end if
-self.$(id).set_samp_rate($samp_rate)
-#if $nchan() > 0
-self.$(id).set_center_freq($center_freq0, 0)
-self.$(id).set_gain($gain0, 0)
- #if $ant0()
-self.$(id).set_antenna($ant0, 0)
- #end if
- #if $bw0()
-self.$(id).set_bandwidth($bw0, 0)
- #end if
-#end if
-#if $nchan() > 1
-self.$(id).set_center_freq($center_freq1, 1)
-self.$(id).set_gain($gain1, 1)
- #if $ant1()
-self.$(id).set_antenna($ant1, 1)
- #end if
- #if $bw1()
-self.$(id).set_bandwidth($bw1, 1)
- #end if
-#end if
-#if $nchan() > 2
-self.$(id).set_center_freq($center_freq2, 2)
-self.$(id).set_gain($gain2, 2)
- #if $ant2()
-self.$(id).set_antenna($ant2, 2)
- #end if
- #if $bw2()
-self.$(id).set_bandwidth($bw2, 2)
- #end if
-#end if
-#if $nchan() > 3
-self.$(id).set_center_freq($center_freq3, 3)
-self.$(id).set_gain($gain3, 3)
- #if $ant3()
-self.$(id).set_antenna($ant3, 3)
- #end if
- #if $bw3()
-self.$(id).set_bandwidth($bw3, 3)
- #end if
-#end if
-#if $nchan() > 4
-self.$(id).set_center_freq($center_freq4, 4)
-self.$(id).set_gain($gain4, 4)
- #if $ant4()
-self.$(id).set_antenna($ant4, 4)
- #end if
- #if $bw4()
-self.$(id).set_bandwidth($bw4, 4)
- #end if
-#end if
-#if $nchan() > 5
-self.$(id).set_center_freq($center_freq5, 5)
-self.$(id).set_gain($gain5, 5)
- #if $ant5()
-self.$(id).set_antenna($ant5, 5)
- #end if
- #if $bw5()
-self.$(id).set_bandwidth($bw5, 5)
- #end if
-#end if
-#if $nchan() > 6
-self.$(id).set_center_freq($center_freq6, 6)
-self.$(id).set_gain($gain6, 6)
- #if $ant6()
-self.$(id).set_antenna($ant6, 6)
- #end if
- #if $bw6()
-self.$(id).set_bandwidth($bw6, 6)
- #end if
-#end if
-#if $nchan() > 7
-self.$(id).set_center_freq($center_freq7, 7)
-self.$(id).set_gain($gain7, 7)
- #if $ant7()
-self.$(id).set_antenna($ant7, 7)
- #end if
- #if $bw7()
-self.$(id).set_bandwidth($bw7, 7)
- #end if
-#end if
-#if $nchan() > 8
-self.$(id).set_center_freq($center_freq8, 8)
-self.$(id).set_gain($gain8, 8)
- #if $ant8()
-self.$(id).set_antenna($ant8, 8)
- #end if
- #if $bw8()
-self.$(id).set_bandwidth($bw8, 8)
- #end if
-#end if
-#if $nchan() > 9
-self.$(id).set_center_freq($center_freq9, 9)
-self.$(id).set_gain($gain9, 9)
- #if $ant9()
-self.$(id).set_antenna($ant9, 9)
- #end if
- #if $bw9()
-self.$(id).set_bandwidth($bw9, 9)
- #end if
-#end if
-#if $nchan() > 10
-self.$(id).set_center_freq($center_freq10, 10)
-self.$(id).set_gain($gain10, 10)
- #if $ant10()
-self.$(id).set_antenna($ant10, 10)
- #end if
- #if $bw10()
-self.$(id).set_bandwidth($bw10, 10)
- #end if
-#end if
-#if $nchan() > 11
-self.$(id).set_center_freq($center_freq11, 11)
-self.$(id).set_gain($gain11, 11)
- #if $ant11()
-self.$(id).set_antenna($ant11, 11)
- #end if
- #if $bw11()
-self.$(id).set_bandwidth($bw11, 11)
- #end if
-#end if
-#if $nchan() > 12
-self.$(id).set_center_freq($center_freq12, 12)
-self.$(id).set_gain($gain12, 12)
- #if $ant12()
-self.$(id).set_antenna($ant12, 12)
- #end if
- #if $bw12()
-self.$(id).set_bandwidth($bw12, 12)
- #end if
-#end if
-#if $nchan() > 13
-self.$(id).set_center_freq($center_freq13, 13)
-self.$(id).set_gain($gain13, 13)
- #if $ant13()
-self.$(id).set_antenna($ant13, 13)
- #end if
- #if $bw13()
-self.$(id).set_bandwidth($bw13, 13)
- #end if
-#end if
-#if $nchan() > 14
-self.$(id).set_center_freq($center_freq14, 14)
-self.$(id).set_gain($gain14, 14)
- #if $ant14()
-self.$(id).set_antenna($ant14, 14)
- #end if
- #if $bw14()
-self.$(id).set_bandwidth($bw14, 14)
- #end if
-#end if
-#if $nchan() > 15
-self.$(id).set_center_freq($center_freq15, 15)
-self.$(id).set_gain($gain15, 15)
- #if $ant15()
-self.$(id).set_antenna($ant15, 15)
- #end if
- #if $bw15()
-self.$(id).set_bandwidth($bw15, 15)
- #end if
-#end if
-</make>
- <callback>set_samp_rate($samp_rate)</callback>
- <callback>set_center_freq($center_freq0, 0)</callback>
- <callback>set_gain($gain0, 0)</callback>
- <callback>set_antenna($ant0, 0)</callback>
- <callback>set_bandwidth($bw0, 0)</callback>
- <callback>set_center_freq($center_freq1, 1)</callback>
- <callback>set_gain($gain1, 1)</callback>
- <callback>set_antenna($ant1, 1)</callback>
- <callback>set_bandwidth($bw1, 1)</callback>
- <callback>set_center_freq($center_freq2, 2)</callback>
- <callback>set_gain($gain2, 2)</callback>
- <callback>set_antenna($ant2, 2)</callback>
- <callback>set_bandwidth($bw2, 2)</callback>
- <callback>set_center_freq($center_freq3, 3)</callback>
- <callback>set_gain($gain3, 3)</callback>
- <callback>set_antenna($ant3, 3)</callback>
- <callback>set_bandwidth($bw3, 3)</callback>
- <callback>set_center_freq($center_freq4, 4)</callback>
- <callback>set_gain($gain4, 4)</callback>
- <callback>set_antenna($ant4, 4)</callback>
- <callback>set_bandwidth($bw4, 4)</callback>
- <callback>set_center_freq($center_freq5, 5)</callback>
- <callback>set_gain($gain5, 5)</callback>
- <callback>set_antenna($ant5, 5)</callback>
- <callback>set_bandwidth($bw5, 5)</callback>
- <callback>set_center_freq($center_freq6, 6)</callback>
- <callback>set_gain($gain6, 6)</callback>
- <callback>set_antenna($ant6, 6)</callback>
- <callback>set_bandwidth($bw6, 6)</callback>
- <callback>set_center_freq($center_freq7, 7)</callback>
- <callback>set_gain($gain7, 7)</callback>
- <callback>set_antenna($ant7, 7)</callback>
- <callback>set_bandwidth($bw7, 7)</callback>
- <callback>set_center_freq($center_freq8, 8)</callback>
- <callback>set_gain($gain8, 8)</callback>
- <callback>set_antenna($ant8, 8)</callback>
- <callback>set_bandwidth($bw8, 8)</callback>
- <callback>set_center_freq($center_freq9, 9)</callback>
- <callback>set_gain($gain9, 9)</callback>
- <callback>set_antenna($ant9, 9)</callback>
- <callback>set_bandwidth($bw9, 9)</callback>
- <callback>set_center_freq($center_freq10, 10)</callback>
- <callback>set_gain($gain10, 10)</callback>
- <callback>set_antenna($ant10, 10)</callback>
- <callback>set_bandwidth($bw10, 10)</callback>
- <callback>set_center_freq($center_freq11, 11)</callback>
- <callback>set_gain($gain11, 11)</callback>
- <callback>set_antenna($ant11, 11)</callback>
- <callback>set_bandwidth($bw11, 11)</callback>
- <callback>set_center_freq($center_freq12, 12)</callback>
- <callback>set_gain($gain12, 12)</callback>
- <callback>set_antenna($ant12, 12)</callback>
- <callback>set_bandwidth($bw12, 12)</callback>
- <callback>set_center_freq($center_freq13, 13)</callback>
- <callback>set_gain($gain13, 13)</callback>
- <callback>set_antenna($ant13, 13)</callback>
- <callback>set_bandwidth($bw13, 13)</callback>
- <callback>set_center_freq($center_freq14, 14)</callback>
- <callback>set_gain($gain14, 14)</callback>
- <callback>set_antenna($ant14, 14)</callback>
- <callback>set_bandwidth($bw14, 14)</callback>
- <callback>set_center_freq($center_freq15, 15)</callback>
- <callback>set_gain($gain15, 15)</callback>
- <callback>set_antenna($ant15, 15)</callback>
- <callback>set_bandwidth($bw15, 15)</callback>
- <param>
- <name>Input Type</name>
- <key>type</key>
- <type>enum</type>
- <option>
- <name>Complex</name>
- <key>complex</key>
- <opt>type:COMPLEX_FLOAT32</opt>
- <opt>vlen:1</opt>
- </option>
- <option>
- <name>Short</name>
- <key>short</key>
- <opt>type:COMPLEX_INT16</opt>
- <opt>vlen:2</opt>
- </option>
- </param>
- <param>
- <name>Device Addr</name>
- <key>dev_addr</key>
- <value></value>
- <type>string</type>
- <hide>
- #if $dev_addr()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ref Clock</name>
- <key>ref_clk</key>
- <value></value>
- <type>enum</type>
- <hide>#if $ref_clk() then 'none' else 'part'#</hide>
- <option>
- <name>External</name>
- <key>ext</key>
- </option>
- <option>
- <name>Internal</name>
- <key></key>
- </option>
- </param>
- <param>
- <name>Sync</name>
- <key>sync</key>
- <value>sync</value>
- <type>enum</type>
- <hide>#if $sync() then 'none' else 'part'#</hide>
- <option>
- <name>unknown PPS</name>
- <key>sync</key>
- </option>
- <option>
- <name>don't sync</name>
- <key></key>
- </option>
- </param>
- <param>
- <name>Num Mboards</name>
- <key>num_mboards</key>
- <value>1</value>
- <type>int</type>
- <option>
- <name>1</name>
- <key>1</key>
- </option>
- <option>
- <name>2</name>
- <key>2</key>
- </option>
- <option>
- <name>3</name>
- <key>3</key>
- </option>
- <option>
- <name>4</name>
- <key>4</key>
- </option>
- </param>
- <param>
- <name>Mb0: Subdev Spec</name>
- <key>sd_spec0</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $num_mboards() > 0
- all
- #elif $sd_spec0()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Mb1: Subdev Spec</name>
- <key>sd_spec1</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $num_mboards() > 1
- all
- #elif $sd_spec1()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Mb2: Subdev Spec</name>
- <key>sd_spec2</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $num_mboards() > 2
- all
- #elif $sd_spec2()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Mb3: Subdev Spec</name>
- <key>sd_spec3</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $num_mboards() > 3
- all
- #elif $sd_spec3()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Num Channels</name>
- <key>nchan</key>
- <value>1</value>
- <type>int</type>
- <option>
- <name>1</name>
- <key>1</key>
- </option>
- <option>
- <name>2</name>
- <key>2</key>
- </option>
- <option>
- <name>3</name>
- <key>3</key>
- </option>
- <option>
- <name>4</name>
- <key>4</key>
- </option>
- <option>
- <name>5</name>
- <key>5</key>
- </option>
- <option>
- <name>6</name>
- <key>6</key>
- </option>
- <option>
- <name>7</name>
- <key>7</key>
- </option>
- <option>
- <name>8</name>
- <key>8</key>
- </option>
- <option>
- <name>9</name>
- <key>9</key>
- </option>
- <option>
- <name>10</name>
- <key>10</key>
- </option>
- <option>
- <name>11</name>
- <key>11</key>
- </option>
- <option>
- <name>12</name>
- <key>12</key>
- </option>
- <option>
- <name>13</name>
- <key>13</key>
- </option>
- <option>
- <name>14</name>
- <key>14</key>
- </option>
- <option>
- <name>15</name>
- <key>15</key>
- </option>
- <option>
- <name>16</name>
- <key>16</key>
- </option>
- </param>
- <param>
- <name>Samp Rate (Sps)</name>
- <key>samp_rate</key>
- <value>samp_rate</value>
- <type>real</type>
- </param>
-
- <param>
- <name>Ch0: Center Freq (Hz)</name>
- <key>center_freq0</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 0 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch0: Gain (dB)</name>
- <key>gain0</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 0 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch0: Antenna</name>
- <key>ant0</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 0
- all
- #elif $ant0()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch0: Bandwidth (Hz)</name>
- <key>bw0</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 0
- all
- #elif $bw0()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch1: Center Freq (Hz)</name>
- <key>center_freq1</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 1 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch1: Gain (dB)</name>
- <key>gain1</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 1 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch1: Antenna</name>
- <key>ant1</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 1
- all
- #elif $ant1()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch1: Bandwidth (Hz)</name>
- <key>bw1</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 1
- all
- #elif $bw1()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch2: Center Freq (Hz)</name>
- <key>center_freq2</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 2 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch2: Gain (dB)</name>
- <key>gain2</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 2 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch2: Antenna</name>
- <key>ant2</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 2
- all
- #elif $ant2()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch2: Bandwidth (Hz)</name>
- <key>bw2</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 2
- all
- #elif $bw2()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch3: Center Freq (Hz)</name>
- <key>center_freq3</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 3 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch3: Gain (dB)</name>
- <key>gain3</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 3 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch3: Antenna</name>
- <key>ant3</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 3
- all
- #elif $ant3()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch3: Bandwidth (Hz)</name>
- <key>bw3</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 3
- all
- #elif $bw3()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch4: Center Freq (Hz)</name>
- <key>center_freq4</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 4 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch4: Gain (dB)</name>
- <key>gain4</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 4 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch4: Antenna</name>
- <key>ant4</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 4
- all
- #elif $ant4()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch4: Bandwidth (Hz)</name>
- <key>bw4</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 4
- all
- #elif $bw4()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch5: Center Freq (Hz)</name>
- <key>center_freq5</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 5 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch5: Gain (dB)</name>
- <key>gain5</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 5 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch5: Antenna</name>
- <key>ant5</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 5
- all
- #elif $ant5()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch5: Bandwidth (Hz)</name>
- <key>bw5</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 5
- all
- #elif $bw5()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch6: Center Freq (Hz)</name>
- <key>center_freq6</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 6 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch6: Gain (dB)</name>
- <key>gain6</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 6 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch6: Antenna</name>
- <key>ant6</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 6
- all
- #elif $ant6()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch6: Bandwidth (Hz)</name>
- <key>bw6</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 6
- all
- #elif $bw6()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch7: Center Freq (Hz)</name>
- <key>center_freq7</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 7 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch7: Gain (dB)</name>
- <key>gain7</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 7 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch7: Antenna</name>
- <key>ant7</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 7
- all
- #elif $ant7()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch7: Bandwidth (Hz)</name>
- <key>bw7</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 7
- all
- #elif $bw7()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch8: Center Freq (Hz)</name>
- <key>center_freq8</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 8 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch8: Gain (dB)</name>
- <key>gain8</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 8 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch8: Antenna</name>
- <key>ant8</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 8
- all
- #elif $ant8()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch8: Bandwidth (Hz)</name>
- <key>bw8</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 8
- all
- #elif $bw8()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch9: Center Freq (Hz)</name>
- <key>center_freq9</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 9 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch9: Gain (dB)</name>
- <key>gain9</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 9 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch9: Antenna</name>
- <key>ant9</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 9
- all
- #elif $ant9()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch9: Bandwidth (Hz)</name>
- <key>bw9</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 9
- all
- #elif $bw9()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch10: Center Freq (Hz)</name>
- <key>center_freq10</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 10 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch10: Gain (dB)</name>
- <key>gain10</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 10 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch10: Antenna</name>
- <key>ant10</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 10
- all
- #elif $ant10()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch10: Bandwidth (Hz)</name>
- <key>bw10</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 10
- all
- #elif $bw10()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch11: Center Freq (Hz)</name>
- <key>center_freq11</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 11 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch11: Gain (dB)</name>
- <key>gain11</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 11 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch11: Antenna</name>
- <key>ant11</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 11
- all
- #elif $ant11()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch11: Bandwidth (Hz)</name>
- <key>bw11</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 11
- all
- #elif $bw11()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch12: Center Freq (Hz)</name>
- <key>center_freq12</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 12 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch12: Gain (dB)</name>
- <key>gain12</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 12 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch12: Antenna</name>
- <key>ant12</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 12
- all
- #elif $ant12()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch12: Bandwidth (Hz)</name>
- <key>bw12</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 12
- all
- #elif $bw12()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch13: Center Freq (Hz)</name>
- <key>center_freq13</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 13 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch13: Gain (dB)</name>
- <key>gain13</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 13 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch13: Antenna</name>
- <key>ant13</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 13
- all
- #elif $ant13()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch13: Bandwidth (Hz)</name>
- <key>bw13</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 13
- all
- #elif $bw13()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch14: Center Freq (Hz)</name>
- <key>center_freq14</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 14 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch14: Gain (dB)</name>
- <key>gain14</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 14 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch14: Antenna</name>
- <key>ant14</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 14
- all
- #elif $ant14()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch14: Bandwidth (Hz)</name>
- <key>bw14</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 14
- all
- #elif $bw14()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <param>
- <name>Ch15: Center Freq (Hz)</name>
- <key>center_freq15</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 15 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch15: Gain (dB)</name>
- <key>gain15</key>
- <value>0</value>
- <type>real</type>
- <hide>#if $nchan() > 15 then 'none' else 'all'#</hide>
- </param>
- <param>
- <name>Ch15: Antenna</name>
- <key>ant15</key>
- <value></value>
- <type>string</type>
- <hide>
- #if not $nchan() > 15
- all
- #elif $ant15()
- none
- #else
- part
- #end if
- </hide>
- </param>
- <param>
- <name>Ch15: Bandwidth (Hz)</name>
- <key>bw15</key>
- <value>0</value>
- <type>real</type>
- <hide>
- #if not $nchan() > 15
- all
- #elif $bw15()
- none
- #else
- part
- #end if
- </hide>
- </param>
-
- <check>16 >= $nchan</check>
- <check>$nchan > 0</check>
- <check>4 >= $num_mboards</check>
- <check>$num_mboards > 0</check>
- <check>$nchan >= $num_mboards</check>
- <source>
- <name>out</name>
- <type>$type</type>
- <vlen>$type.vlen</vlen>
- <nports>$nchan</nports>
- </source>
- <doc>
-The UHD USRP Source Block:
-
-Device Address:
-The device address is a delimited string used to locate UHD devices on your system. \
-If left blank, the first UHD device found will be used. \
-Use the device address to specify a specific device or list of devices.
-USRP1 Example: serial=12345678
-USRP2 Example: addr=192.168.10.2
-USRP2 Example: addr0=192.168.10.2, addr1=192.168.10.3
-
-Num Motherboards:
-Selects the number of USRP motherboards in this device configuration.
-
-Subdevice specification:
-Each motherboard should have its own subdevice specification \
-and all subdevice specifications should be the same length. \
-Select the subdevice or subdevices for each channel using a markup string. \
-The markup string consists of a list of dboard_slot:subdev_name pairs (one pair per channel). \
-If left blank, the UHD will try to select the first subdevice on your system. \
-See the application notes for further details.
-Single channel example: :AB
-Dual channel example: :A :B
-
-Num Channels:
-Selects the total number of channels in this multi-USRP configuration.
-Ex: 4 motherboards with 2 channels per board = 8 channels total
-
-Sample rate:
-The sample rate is the number of samples per second input by this block. \
-The UHD device driver will try its best to match the requested sample rate. \
-If the requested rate is not possible, the UHD block will print an error at runtime.
-
-Center frequency:
-The center frequency is the overall frequency of the RF chain. \
-For greater control of how the UHD tunes elements in the RF chain, \
-pass a tune_request object rather than a simple target frequency.
-Tuning with an LO offset example: uhd.tune_request(freq, lo_off)
-
-Antenna:
-For subdevices with only one antenna, this may be left blank. \
-Otherwise, the user should specify one of the possible antenna choices. \
-See the daughterboard application notes for the possible antenna choices.
-
-Bandwidth:
-To use the default bandwidth filter setting, this should be zero. \
-Only certain subdevices have configurable bandwidth filters. \
-See the daughterboard application notes for possible configurations.
- </doc>
-</block>
diff --git a/gr-uhd/include/gr_uhd_usrp_sink.h b/gr-uhd/include/gr_uhd_usrp_sink.h
index caa8c230f3..4644af5df1 100644
--- a/gr-uhd/include/gr_uhd_usrp_sink.h
+++ b/gr-uhd/include/gr_uhd_usrp_sink.h
@@ -155,6 +155,20 @@ public:
*/
virtual void set_clock_config(const uhd::clock_config_t &clock_config, size_t mboard = 0) = 0;
+ /*!
+ * Get the master clock rate.
+ * \param mboard the motherboard index 0 to M-1
+ * \return the clock rate in Hz
+ */
+ virtual double get_clock_rate(size_t mboard = 0) = 0;
+
+ /*!
+ * Set the master clock rate.
+ * \param rate the new rate in Hz
+ * \param mboard the motherboard index 0 to M-1
+ */
+ virtual void set_clock_rate(double rate, size_t mboard = 0) = 0;
+
/*!
* Get the current time registers.
* \return the current usrp time
diff --git a/gr-uhd/include/gr_uhd_usrp_source.h b/gr-uhd/include/gr_uhd_usrp_source.h
index a5f9600daf..b8d0768d9e 100644
--- a/gr-uhd/include/gr_uhd_usrp_source.h
+++ b/gr-uhd/include/gr_uhd_usrp_source.h
@@ -155,6 +155,20 @@ public:
*/
virtual void set_clock_config(const uhd::clock_config_t &clock_config, size_t mboard = 0) = 0;
+ /*!
+ * Get the master clock rate.
+ * \param mboard the motherboard index 0 to M-1
+ * \return the clock rate in Hz
+ */
+ virtual double get_clock_rate(size_t mboard = 0) = 0;
+
+ /*!
+ * Set the master clock rate.
+ * \param rate the new rate in Hz
+ * \param mboard the motherboard index 0 to M-1
+ */
+ virtual void set_clock_rate(double rate, size_t mboard = 0) = 0;
+
/*!
* Get the current time registers.
* \return the current usrp time
diff --git a/gr-uhd/lib/gr_uhd_usrp_sink.cc b/gr-uhd/lib/gr_uhd_usrp_sink.cc
index 2ca4c33a10..284e33acea 100644
--- a/gr-uhd/lib/gr_uhd_usrp_sink.cc
+++ b/gr-uhd/lib/gr_uhd_usrp_sink.cc
@@ -109,6 +109,14 @@ public:
return _dev->set_clock_config(clock_config, mboard);
}
+ double get_clock_rate(size_t mboard){
+ return _dev->get_master_clock_rate(mboard);
+ }
+
+ void set_clock_rate(double rate, size_t mboard){
+ return _dev->set_master_clock_rate(rate, mboard);
+ }
+
uhd::time_spec_t get_time_now(void){
return _dev->get_time_now();
}
diff --git a/gr-uhd/lib/gr_uhd_usrp_source.cc b/gr-uhd/lib/gr_uhd_usrp_source.cc
index 17877d04c9..6c8e7f40f2 100644
--- a/gr-uhd/lib/gr_uhd_usrp_source.cc
+++ b/gr-uhd/lib/gr_uhd_usrp_source.cc
@@ -109,6 +109,14 @@ public:
return _dev->set_clock_config(clock_config, mboard);
}
+ double get_clock_rate(size_t mboard){
+ return _dev->get_master_clock_rate(mboard);
+ }
+
+ void set_clock_rate(double rate, size_t mboard){
+ return _dev->set_master_clock_rate(rate, mboard);
+ }
+
uhd::time_spec_t get_time_now(void){
return _dev->get_time_now();
}
--
cgit v1.2.3