From 7787d1fc1aecc7b59e476c31865b4f32348cb729 Mon Sep 17 00:00:00 2001 From: Josh Blum <josh@joshknows.com> Date: Thu, 10 Feb 2011 00:56:55 -0800 Subject: uhd: replaced multi/single usrp stuff with just one usrp wrapper --- gr-uhd/grc/gen_uhd_single_usrp_blocks_xml.py | 265 --------------------------- 1 file changed, 265 deletions(-) delete mode 100755 gr-uhd/grc/gen_uhd_single_usrp_blocks_xml.py (limited to 'gr-uhd/grc/gen_uhd_single_usrp_blocks_xml.py') diff --git a/gr-uhd/grc/gen_uhd_single_usrp_blocks_xml.py b/gr-uhd/grc/gen_uhd_single_usrp_blocks_xml.py deleted file mode 100755 index 4de21c9898..0000000000 --- a/gr-uhd/grc/gen_uhd_single_usrp_blocks_xml.py +++ /dev/null @@ -1,265 +0,0 @@ -#!/usr/bin/env python -""" -Copyright 2010-2011 Free Software Foundation, Inc. - -This file is part of GNU Radio - -GNU Radio Companion is free software; you can redistribute it and/or -modify it under the terms of the GNU General Public License -as published by the Free Software Foundation; either version 2 -of the License, or (at your option) any later version. - -GNU Radio Companion is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program; if not, write to the Free Software -Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA -""" - -MAIN_TMPL = """\ -<?xml version="1.0"?> -<block> - <name>UHD: Single USRP $sourk.title()</name> - <key>uhd_single_usrp_$(sourk)</key> - <import>from gnuradio import uhd</import> - <make>uhd.single_usrp_$(sourk)( - device_addr=\$dev_addr, - io_type=uhd.io_type.\$type.type, - num_channels=\$nchan, -) -\#if \$ref_clk() -self.\$(id).set_clock_config(uhd.clock_config.external()); -\#end if -\#if \$sd_spec() -self.\$(id).set_subdev_spec(\$sd_spec) -\#end if -self.\$(id).set_samp_rate(\$samp_rate) -#for $n in range($max_nchan) -\#if \$nchan() > $n -self.\$(id).set_center_freq(\$center_freq$(n), $n) -self.\$(id).set_gain(\$gain$(n), $n) - \#if \$ant$(n)() -self.\$(id).set_antenna(\$ant$(n), $n) - \#end if - \#if \$bw$(n)() -self.\$(id).set_bandwidth(\$bw$(n), $n) - \#end if -\#end if -#end for -</make> - <callback>set_samp_rate(\$samp_rate)</callback> - #for $n in range($max_nchan) - <callback>set_center_freq(\$center_freq$(n), $n)</callback> - <callback>set_gain(\$gain$(n), $n)</callback> - <callback>set_antenna(\$ant$(n), $n)</callback> - <callback>set_bandwidth(\$bw$(n), $n)</callback> - #end for - <param> - <name>Input Type</name> - <key>type</key> - <type>enum</type> - <option> - <name>Complex</name> - <key>complex</key> - <opt>type:COMPLEX_FLOAT32</opt> - <opt>vlen:1</opt> - </option> - <option> - <name>Short</name> - <key>short</key> - <opt>type:COMPLEX_INT16</opt> - <opt>vlen:2</opt> - </option> - </param> - <param> - <name>Num Channels</name> - <key>nchan</key> - <value>1</value> - <type>int</type> - <hide>part</hide> - <option> - <name>Single Channel</name> - <key>1</key> - </option> - <option> - <name>Dual Channel</name> - <key>2</key> - </option> - <option> - <name>Quad Channel</name> - <key>4</key> - </option> - </param> - <param> - <name>Device Addr</name> - <key>dev_addr</key> - <value>addr=192.168.10.2</value> - <type>string</type> - <hide> - \#if \$dev_addr() - none - \#else - part - \#end if - </hide> - </param> - <param> - <name>Ref Clock</name> - <key>ref_clk</key> - <value></value> - <type>enum</type> - <hide>\#if \$ref_clk() then 'none' else 'part'#</hide> - <option> - <name>External</name> - <key>ext</key> - </option> - <option> - <name>Internal</name> - <key></key> - </option> - </param> - <param> - <name>Subdev Spec</name> - <key>sd_spec</key> - <value></value> - <type>string</type> - <hide> - \#if \$sd_spec() - none - \#else - part - \#end if - </hide> - </param> - <param> - <name>Samp Rate (Sps)</name> - <key>samp_rate</key> - <value>samp_rate</value> - <type>real</type> - </param> - $params - <check>$max_nchan >= \$nchan</check> - <check>\$nchan > 0</check> - <check>(len((\$sd_spec).split()) or 1) == \$nchan</check> - <$sourk> - <name>$direction</name> - <type>\$type</type> - <vlen>\$type.vlen</vlen> - <nports>\$nchan</nports> - </$sourk> - <doc> -The UHD Single USRP $sourk.title() Block: - -Device Address: -The device address is a delimited string used to locate UHD devices on your system. \\ -If left blank, the first UHD device found will be used. \\ -Use the device address to specify a specific device. -USRP2 Example: addr=192.168.10.2 -USRP1 Example: serial=12345678 - -Subdevice specification: -Select the subdevice or subdevices for each channel using a markup string. \\ -The markup string consists of a list of dboard_slot:subdev_name pairs (one pair per channel). \\ -If left blank, the UHD will try to select the first subdevice on your system. \\ -See the application notes for further details. -Single channel example: A:AB -Dual channel example: A:AB B:0 - -Sample rate: -The sample rate is the number of samples per second input by this block. \\ -The UHD device driver will try its best to match the requested sample rate. \\ -If the requested rate is not possible, the UHD block will print an error at runtime. - -Center frequency: -The center frequency is the overall frequency of the RF chain. \\ -For greater control of how the UHD tunes elements in the RF chain, \\ -pass a tune_request object rather than a simple target frequency. -Tuning with an LO offset example: uhd.tune_request(freq, lo_off) - -Antenna: -For subdevices with only one antenna, this may be left blank. \\ -Otherwise, the user should specify one of the possible antenna choices. \\ -See the daughterboard application notes for the possible antenna choices. - -Bandwidth: -To use the default bandwidth filter setting, this should be zero. \\ -Only certain subdevices have configurable bandwidth filters. \\ -See the daughterboard application notes for possible configurations. - </doc> -</block> -""" - -PARAMS_TMPL = """ - <param> - <name>Ch$(n): Center Freq (Hz)</name> - <key>center_freq$(n)</key> - <value>0</value> - <type>real</type> - <hide>\#if \$nchan() > $n then 'none' else 'all'#</hide> - </param> - <param> - <name>Ch$(n): Gain (dB)</name> - <key>gain$(n)</key> - <value>0</value> - <type>real</type> - <hide>\#if \$nchan() > $n then 'none' else 'all'#</hide> - </param> - <param> - <name>Ch$(n): Antenna</name> - <key>ant$(n)</key> - <value></value> - <type>string</type> - <hide> - \#if not \$nchan() > $n - all - \#elif \$ant$(n)() - none - \#else - part - \#end if - </hide> - </param> - <param> - <name>Ch$(n): Bandwidth (Hz)</name> - <key>bw$(n)</key> - <value>0</value> - <type>real</type> - <hide> - \#if not \$nchan() > $n - all - \#elif \$bw$(n)() - none - \#else - part - \#end if - </hide> - </param> -""" - -def parse_tmpl(_tmpl, **kwargs): - from Cheetah import Template - return str(Template.Template(_tmpl, kwargs)) - -max_num_channels = 4 - -if __name__ == '__main__': - import sys - for file in sys.argv[1:]: - if 'source' in file: - sourk = 'source' - direction = 'out' - elif 'sink' in file: - sourk = 'sink' - direction = 'in' - else: raise Exception, 'is %s a source or sink?'%file - - params = ''.join([parse_tmpl(PARAMS_TMPL, n=n) for n in range(max_num_channels)]) - open(file, 'w').write(parse_tmpl(MAIN_TMPL, - max_nchan=max_num_channels, - params=params, - sourk=sourk, - direction=direction, - )) -- cgit v1.2.3