From 6d9a16470bbb416d311a8830d7db42d6c69a39cf Mon Sep 17 00:00:00 2001
From: Johnathan Corgan <johnathan@corganlabs.com>
Date: Thu, 8 Sep 2016 13:15:11 -0700
Subject: wxgui: removed
---
gr-uhd/examples/python/max_power.py | 142 ------------------------------------
1 file changed, 142 deletions(-)
delete mode 100755 gr-uhd/examples/python/max_power.py
(limited to 'gr-uhd/examples/python/max_power.py')
diff --git a/gr-uhd/examples/python/max_power.py b/gr-uhd/examples/python/max_power.py
deleted file mode 100755
index e1504e5ea2..0000000000
--- a/gr-uhd/examples/python/max_power.py
+++ /dev/null
@@ -1,142 +0,0 @@
-#!/usr/bin/env python
-#
-# Copyright 2004,2007,2011,2012 Free Software Foundation, Inc.
-#
-# This file is part of GNU Radio
-#
-# GNU Radio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# GNU Radio is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Radio; see the file COPYING. If not, write to
-# the Free Software Foundation, Inc., 51 Franklin Street,
-# Boston, MA 02110-1301, USA.
-#
-
-"""
-Setup USRP for maximum power consumption.
-"""
-
-
-from gnuradio import gr
-from gnuradio import analog
-from gnuradio import blocks
-from gnuradio import uhd
-from gnuradio.eng_option import eng_option
-from optparse import OptionParser
-
-from gnuradio import eng_notation
-
-n2s = eng_notation.num_to_str
-
-# Set this to a huge number; UHD will adjust to the
-# maximum the USRP xxxx device can handle
-MAX_RATE = 1000e6
-
-class build_block(gr.top_block):
- def __init__(self, args, tx_enable, rx_enable):
- gr.top_block.__init__(self)
-
- d = uhd.find_devices(uhd.device_addr(args))
- uhd_type = d[0].get('type')
-
- print "\nFound '%s' at args '%s'" % \
- (uhd_type, args)
-
- # Test the type of USRP; if it's a USRP (v1), it has
- # 2 channels; otherwise, it has 1 channel
- if uhd_type == "usrp":
- tx_nchan = 2
- rx_nchan = 2
- else:
- tx_nchan = 1
- rx_nchan = 1
-
- if tx_enable:
- print "\nTRANSMIT CHAIN"
- stream_args = uhd.stream_args('fc32', channels=range(tx_nchan))
- self.u_tx = uhd.usrp_sink(device_addr=args, stream_args=stream_args)
- self.u_tx.set_samp_rate(MAX_RATE)
-
- self.tx_src0 = analog.sig_source_c(self.u_tx.get_samp_rate(),
- analog.GR_CONST_WAVE,
- 0, 1.0, 0)
-
- # Get dboard gain range and select maximum
- tx_gain_range = self.u_tx.get_gain_range()
- tx_gain = tx_gain_range.stop()
-
- # Get dboard freq range and select midpoint
- tx_freq_range = self.u_tx.get_freq_range()
- tx_freq_mid = (tx_freq_range.start() + tx_freq_range.stop())/2.0
-
- for i in xrange(tx_nchan):
- self.u_tx.set_center_freq (tx_freq_mid + i*1e6, i)
- self.u_tx.set_gain(tx_gain, i)
-
- print "\nTx Sample Rate: %ssps" % (n2s(self.u_tx.get_samp_rate()))
- for i in xrange(tx_nchan):
- print "Tx Channel %d: " % (i)
- print "\tFrequency = %sHz" % \
- (n2s(self.u_tx.get_center_freq(i)))
- print "\tGain = %f dB" % (self.u_tx.get_gain(i))
- print ""
-
- self.connect (self.tx_src0, self.u_tx)
-
- if rx_enable:
- print "\nRECEIVE CHAIN"
- self.u_rx = uhd.usrp_source(device_addr=args,
- io_type=uhd.io_type.COMPLEX_FLOAT32,
- num_channels=rx_nchan)
- self.rx_dst0 = blocks.null_sink(gr.sizeof_gr_complex)
-
- self.u_rx.set_samp_rate(MAX_RATE)
-
- # Get dboard gain range and select maximum
- rx_gain_range = self.u_rx.get_gain_range()
- rx_gain = rx_gain_range.stop()
-
- # Get dboard freq range and select midpoint
- rx_freq_range = self.u_rx.get_freq_range()
- rx_freq_mid = (rx_freq_range.start() + rx_freq_range.stop())/2.0
-
- for i in xrange(tx_nchan):
- self.u_rx.set_center_freq (rx_freq_mid + i*1e6, i)
- self.u_rx.set_gain(rx_gain, i)
-
- print "\nRx Sample Rate: %ssps" % (n2s(self.u_rx.get_samp_rate()))
- for i in xrange(rx_nchan):
- print "Rx Channel %d: " % (i)
- print "\tFrequency = %sHz" % \
- (n2s(self.u_rx.get_center_freq(i)))
- print "\tGain = %f dB" % (self.u_rx.get_gain(i))
- print ""
-
- self.connect (self.u_rx, self.rx_dst0)
-
-def main ():
- parser = OptionParser (option_class=eng_option)
- parser.add_option("-a", "--args", type="string", default="",
- help="UHD device address args [default=%default]")
- parser.add_option("-t", action="store_true", dest="tx_enable",
- default=False, help="enable Tx path")
- parser.add_option("-r", action="store_true", dest="rx_enable",
- default=False, help="enable Rx path")
- (options, args) = parser.parse_args ()
-
- tb = build_block (options.args, options.tx_enable, options.rx_enable)
-
- tb.start ()
- raw_input ('Press Enter to quit: ')
- tb.stop ()
-
-if __name__ == '__main__':
- main ()
--
cgit v1.2.3