pyqt_plot.py

pyqt_filter.py

DESTINATION ${GR_PYTHON_DIR}/gnuradio

)

GR_PYTHON_INSTALL(

gr_plot_short

gr_plot_qt

gr_read_file_metadata

DESTINATION ${GR_RUNTIME_DIR}

)

from gnuradio.modtool import *

def main():

""" Here we go. Parse command, choose class and run. """

except ModToolException as err:

print >> sys.stderr, err

exit(1)

print "Please install SciPy to run this script (http://www.scipy.org/)"

raise SystemExit, 1

from gnuradio.plot_data import plot_data

def main():

description = "Takes a GNU Radio byte/char binary file and displays the samples versus time. You can set the block size to specify how many points to read in at a time and the start position in the file. By default, the system assumes a sample rate of 1, so in time, each sample is plotted versus the sample number. To set a true time axis, set the sample rate (-R or --sample-rate) to the sample rate used when capturing the samples."

if __name__ == "__main__":

try:

print "Please install Matplotlib to run this script (http://matplotlib.sourceforge.net/)"

raise SystemExit, 1

class draw_constellation:

def __init__(self, filename, options):

def main():

description = "Takes a GNU Radio complex binary file and displays the I&Q data versus time and the constellation plot (I vs. Q). You can set the block size to specify how many points to read in at a time and the start position in the file. By default, the system assumes a sample rate of 1, so in time, each sample is plotted versus the sample number. To set a true time axis, set the sample rate (-R or --sample-rate) to the sample rate used when capturing the samples."

if __name__ == "__main__":

try:

def main():

parser = plot_fft_base.setup_options()

if __name__ == "__main__":

try:

def main():

parser = plot_fft_base.setup_options()

if __name__ == "__main__":

try:

def main():

parser = plot_fft_base.setup_options()

if __name__ == "__main__":

try:

print "Please install SciPy to run this script (http://www.scipy.org/)"

raise SystemExit, 1

from gnuradio.plot_data import plot_data

def main():

description = "Takes a GNU Radio floating point binary file and displays the samples versus time. You can set the block size to specify how many points to read in at a time and the start position in the file. By default, the system assumes a sample rate of 1, so in time, each sample is plotted versus the sample number. To set a true time axis, set the sample rate (-R or --sample-rate) to the sample rate used when capturing the samples."

datatype=scipy.float32

if __name__ == "__main__":

try:

print "Please install SciPy to run this script (http://www.scipy.org/)"

raise SystemExit, 1

from gnuradio.plot_data import plot_data

def main():

description = "Takes a GNU Radio integer binary file and displays the samples versus time. You can set the block size to specify how many points to read in at a time and the start position in the file. By default, the system assumes a sample rate of 1, so in time, each sample is plotted versus the sample number. To set a true time axis, set the sample rate (-R or --sample-rate) to the sample rate used when capturing the samples."

datatype=scipy.int32

if __name__ == "__main__":

try:

print "Please install Matplotlib to run this script (http://matplotlib.sourceforge.net/)"

raise SystemExit, 1

class draw_iq:

def __init__(self, filename, options):

return False

def main():

description = "Takes a GNU Radio complex binary file and displays the I&Q data versus time. You can set the block size to specify how many points to read in at a time and the start position in the file. By default, the system assumes a sample rate of 1, so in time, each sample is plotted versus the sample number. To set a true time axis, set the sample rate (-R or --sample-rate) to the sample rate used when capturing the samples."

if __name__ == "__main__":

try:

def main():

parser = plot_psd_base.setup_options()

if __name__ == "__main__":

try:

# Boston, MA 02110-1301, USA.

#

from gnuradio.plot_psd_base import plot_psd_base

# This is a wrapper program for plot_psd_base specifically for complex data

def main():

parser = plot_psd_base.setup_options()

if __name__ == "__main__":

try:

# Boston, MA 02110-1301, USA.

#

from gnuradio.plot_psd_base import plot_psd_base

# This is a wrapper program for gr_plot_psd specifically for floating point data

def main():

parser = plot_psd_base.setup_options()

if __name__ == "__main__":

try:

print "Please install SciPy to run this script (http://www.scipy.org/)"

raise SystemExit, 1

from gnuradio.plot_data import plot_data

def main():

description = "Takes a GNU Radio short integer binary file and displays the samples versus time. You can set the block size to specify how many points to read in at a time and the start position in the file. By default, the system assumes a sample rate of 1, so in time, each sample is plotted versus the sample number. To set a true time axis, set the sample rate (-R or --sample-rate) to the sample rate used when capturing the samples."

datatype=scipy.int16

if __name__ == "__main__":

try:

#

import sys

import pmt

from gnuradio.blocks import parse_file_metadata

handle.seek(nread, 0)

print "\n\n"

if __name__ == "__main__":

description = "Read in a GNU Radio file with meta data, extracts the header and prints it."

help="Used if header is detached.")

print "Please install Matplotlib to run this script (http://matplotlib.sourceforge.net/)"

raise SystemExit, 1

class plot_data:

def __init__(self, datatype, filenames, options):

print "Please install Python Matplotlib (http://matplotlib.sourceforge.net/) and Python TkInter https://wiki.python.org/moin/TkInter to run this script"

raise SystemExit, 1

class plot_fft_base:

def __init__(self, datatype, filename, options):

@staticmethod

def setup_options():

description = "Takes a GNU Radio complex binary file and displays the I&Q data versus time as well as the frequency domain (FFT) plot. The y-axis values are plotted assuming volts as the amplitude of the I&Q streams and converted into dBm in the frequency domain (the 1/N power adjustment out of the FFT is performed internally). The script plots a certain block of data at a time, specified on the command line as -B or --block. This value defaults to 1000. The start position in the file can be set by specifying -s or --start and defaults to 0 (the start of the file). By default, the system assumes a sample rate of 1, so in time, each sample is plotted versus the sample number. To set a true time and frequency axis, set the sample rate (-R or --sample-rate) to the sample rate used when capturing the samples."

return parser

def find(item_in, list_search):

def main():

parser = plot_fft_base.setup_options()

if __name__ == "__main__":

try:

print "Please install Matplotlib to run this script (http://matplotlib.sourceforge.net/)"

raise SystemExit, 1

from scipy import log10

class plot_psd_base:

def __init__(self, datatype, filename, options):

@staticmethod

def setup_options():

description = "Takes a GNU Radio binary file (with specified data type using --data-type) and displays the I&Q data versus time as well as the power spectral density (PSD) plot. The y-axis values are plotted assuming volts as the amplitude of the I&Q streams and converted into dBm in the frequency domain (the 1/N power adjustment out of the FFT is performed internally). The script plots a certain block of data at a time, specified on the command line as -B or --block. The start position in the file can be set by specifying -s or --start and defaults to 0 (the start of the file). By default, the system assumes a sample rate of 1, so in time, each sample is plotted versus the sample number. To set a true time and frequency axis, set the sample rate (-R or --sample-rate) to the sample rate used when capturing the samples. Finally, the size of the FFT to use for the PSD and spectrogram plots can be set independently with --psd-size and --spec-size, respectively. The spectrogram plot does not display by default and is turned on with -S or --enable-spec."

return parser

def main():

parser = plot_psd_base.setup_options()

if __name__ == "__main__":

try: