OpenBTSThe use of autocreatepeer=yes¶
There seem to be ready to go solution for autoregistration available within Asterisk. Just add "autocreatepeer=yes" to the general part with some extra lines to /etc/asterisk/sip.conf and it is working ok! See http://www.voip-info.org/wiki/page_history.php?page_id=685
for the Asterisk developer who earn the credits for adding this option to Asterisk.
allowoverlap=no ; Disable overlap dialing support. (Default is yes)
bindport=5060 ; UDP Port to bind to (SIP standard port is 5060)
bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all)
srvlookup=yes ; Enable DNS SRV lookups on outbound calls
; lines for automatic sim registration
host=127.0.0.1 ; the assumption is that OpenBts and Asterisk bth run on the same machine
This [general] part is from a working system. Originally the autocreatepeer=yes is mend for the scenario where a dedicated registrar like kamailio/openser is in front of Asterisk and Asterisk can accept any request for registring a peer because the authentication already took place. In combination with the hotdesk routine I added to the wiki this is actually working great.
Be aware of the fact that the context "sip-internal" has to be part of your dialplan or you have to adjust this line in sip.conf so the
context fits with an available extension in the dialplan. Using this option without further authentication with number and pincode before
calling out introduces a great security risk. I guess you don't want people freely to register to your OpenBTS network and have the
permission to make outbound calls s be carefull. Context sip-internal should offer only the permission to log in. I hope this is helpfull
Be aware of the legal framework you have to comply to. What is explained might not be allowed in your country. Don't end up in jail or spending vacation money on penalties!