gnuradio.zeromq
Blocks for interfacing with ZeroMQ endpoints.
-
gnuradio.zeromq.pub_msg_sink(char * address, int timeout=100) → pub_msg_sink_sptr
Sink the contents of a msg port to a ZMQ PUB socket.
This block acts a message port receiver and writes individual messages to a ZMQ PUB socket. A PUB socket may have subscribers and will pass all incoming messages to each subscriber. Subscribers can be either another gr-zeromq source block or a non-GNU Radio ZMQ socket.
Constructor Specific Documentation:
Return a shared_ptr to a new instance of zeromq::pub_msg_sink.
Parameters: |
- address – ZMQ socket address specifier
- timeout – Receive timeout in seconds, default is 100ms, 1us increments
|
-
pub_msg_sink_sptr.active_thread_priority(pub_msg_sink_sptr self) → int
-
pub_msg_sink_sptr.declare_sample_delay(pub_msg_sink_sptr self, int which, int delay)
declare_sample_delay(pub_msg_sink_sptr self, unsigned int delay)
-
pub_msg_sink_sptr.message_subscribers(pub_msg_sink_sptr self, swig_int_ptr which_port) → swig_int_ptr
-
pub_msg_sink_sptr.min_noutput_items(pub_msg_sink_sptr self) → int
-
pub_msg_sink_sptr.pc_input_buffers_full_avg(pub_msg_sink_sptr self, int which) → float
pc_input_buffers_full_avg(pub_msg_sink_sptr self) -> pmt_vector_float
-
pub_msg_sink_sptr.pc_noutput_items_avg(pub_msg_sink_sptr self) → float
-
pub_msg_sink_sptr.pc_nproduced_avg(pub_msg_sink_sptr self) → float
-
pub_msg_sink_sptr.pc_output_buffers_full_avg(pub_msg_sink_sptr self, int which) → float
pc_output_buffers_full_avg(pub_msg_sink_sptr self) -> pmt_vector_float
-
pub_msg_sink_sptr.pc_throughput_avg(pub_msg_sink_sptr self) → float
-
pub_msg_sink_sptr.pc_work_time_avg(pub_msg_sink_sptr self) → float
-
pub_msg_sink_sptr.pc_work_time_total(pub_msg_sink_sptr self) → float
-
pub_msg_sink_sptr.sample_delay(pub_msg_sink_sptr self, int which) → unsigned int
-
pub_msg_sink_sptr.set_min_noutput_items(pub_msg_sink_sptr self, int m)
-
pub_msg_sink_sptr.set_thread_priority(pub_msg_sink_sptr self, int priority) → int
-
pub_msg_sink_sptr.thread_priority(pub_msg_sink_sptr self) → int
-
gnuradio.zeromq.pub_sink(size_t itemsize, size_t vlen, char * address, int timeout=100, bool pass_tags=False) → pub_sink_sptr
Sink the contents of a stream to a ZMQ PUB socket.
This block acts a a streaming sink for a GNU Radio flowgraph and writes its contents to a ZMQ PUB socket. A PUB socket may have subscribers and will pass all incoming stream data to each subscriber. Subscribers can be either another gr-zeromq source block or a non-GNU Radio ZMQ socket.
Constructor Specific Documentation:
Return a shared_ptr to a new instance of zeromq::pub_sink.
Parameters: |
- itemsize – Size of a stream item in bytes.
- vlen – Vector length of the input items. Note that one vector is one item.
- address – ZMQ socket address specifier.
- timeout – Receive timeout in seconds, default is 100ms, 1us increments.
- pass_tags – Whether sink will serialize and pass tags over the link.
|
-
pub_sink_sptr.active_thread_priority(pub_sink_sptr self) → int
-
pub_sink_sptr.declare_sample_delay(pub_sink_sptr self, int which, int delay)
declare_sample_delay(pub_sink_sptr self, unsigned int delay)
-
pub_sink_sptr.message_subscribers(pub_sink_sptr self, swig_int_ptr which_port) → swig_int_ptr
-
pub_sink_sptr.min_noutput_items(pub_sink_sptr self) → int
-
pub_sink_sptr.pc_input_buffers_full_avg(pub_sink_sptr self, int which) → float
pc_input_buffers_full_avg(pub_sink_sptr self) -> pmt_vector_float
-
pub_sink_sptr.pc_noutput_items_avg(pub_sink_sptr self) → float
-
pub_sink_sptr.pc_nproduced_avg(pub_sink_sptr self) → float
-
pub_sink_sptr.pc_output_buffers_full_avg(pub_sink_sptr self, int which) → float
pc_output_buffers_full_avg(pub_sink_sptr self) -> pmt_vector_float
-
pub_sink_sptr.pc_throughput_avg(pub_sink_sptr self) → float
-
pub_sink_sptr.pc_work_time_avg(pub_sink_sptr self) → float
-
pub_sink_sptr.pc_work_time_total(pub_sink_sptr self) → float
-
pub_sink_sptr.sample_delay(pub_sink_sptr self, int which) → unsigned int
-
pub_sink_sptr.set_min_noutput_items(pub_sink_sptr self, int m)
-
pub_sink_sptr.set_thread_priority(pub_sink_sptr self, int priority) → int
-
pub_sink_sptr.thread_priority(pub_sink_sptr self) → int
-
gnuradio.zeromq.pull_msg_source(char * address, int timeout=100) → pull_msg_source_sptr
Receive messages on ZMQ PULL socket and output async messages.
This block will connect to a ZMQ PUSH socket, then convert received messages to outgoing async messages.
Constructor Specific Documentation:
Return a shared_ptr to a new instance of gr::zeromq::pull_msg_source.
Parameters: |
- address – ZMQ socket address specifier
- timeout – Receive timeout in seconds, default is 100ms, 1us increments
|
-
pull_msg_source_sptr.active_thread_priority(pull_msg_source_sptr self) → int
-
pull_msg_source_sptr.declare_sample_delay(pull_msg_source_sptr self, int which, int delay)
declare_sample_delay(pull_msg_source_sptr self, unsigned int delay)
-
pull_msg_source_sptr.message_subscribers(pull_msg_source_sptr self, swig_int_ptr which_port) → swig_int_ptr
-
pull_msg_source_sptr.min_noutput_items(pull_msg_source_sptr self) → int
-
pull_msg_source_sptr.pc_input_buffers_full_avg(pull_msg_source_sptr self, int which) → float
pc_input_buffers_full_avg(pull_msg_source_sptr self) -> pmt_vector_float
-
pull_msg_source_sptr.pc_noutput_items_avg(pull_msg_source_sptr self) → float
-
pull_msg_source_sptr.pc_nproduced_avg(pull_msg_source_sptr self) → float
-
pull_msg_source_sptr.pc_output_buffers_full_avg(pull_msg_source_sptr self, int which) → float
pc_output_buffers_full_avg(pull_msg_source_sptr self) -> pmt_vector_float
-
pull_msg_source_sptr.pc_throughput_avg(pull_msg_source_sptr self) → float
-
pull_msg_source_sptr.pc_work_time_avg(pull_msg_source_sptr self) → float
-
pull_msg_source_sptr.pc_work_time_total(pull_msg_source_sptr self) → float
-
pull_msg_source_sptr.sample_delay(pull_msg_source_sptr self, int which) → unsigned int
-
pull_msg_source_sptr.set_min_noutput_items(pull_msg_source_sptr self, int m)
-
pull_msg_source_sptr.set_thread_priority(pull_msg_source_sptr self, int priority) → int
-
pull_msg_source_sptr.thread_priority(pull_msg_source_sptr self) → int
-
gnuradio.zeromq.pull_source(size_t itemsize, size_t vlen, char * address, int timeout=100, bool pass_tags=False) → pull_source_sptr
Receive messages on ZMQ PULL socket and source stream.
This block will connect to a ZMQ PUSH socket, then produce all incoming messages as streaming output.
Constructor Specific Documentation:
Return a shared_ptr to a new instance of gr::zeromq::pull_source.
Parameters: |
- itemsize – Size of a stream item in bytes.
- vlen – Vector length of the input items. Note that one vector is one item.
- address – ZMQ socket address specifier.
- timeout – Receive timeout in seconds, default is 100ms, 1us increments.
- pass_tags – Whether source will look for and deserialize tags.
|
-
pull_source_sptr.active_thread_priority(pull_source_sptr self) → int
-
pull_source_sptr.declare_sample_delay(pull_source_sptr self, int which, int delay)
declare_sample_delay(pull_source_sptr self, unsigned int delay)
-
pull_source_sptr.message_subscribers(pull_source_sptr self, swig_int_ptr which_port) → swig_int_ptr
-
pull_source_sptr.min_noutput_items(pull_source_sptr self) → int
-
pull_source_sptr.pc_input_buffers_full_avg(pull_source_sptr self, int which) → float
pc_input_buffers_full_avg(pull_source_sptr self) -> pmt_vector_float
-
pull_source_sptr.pc_noutput_items_avg(pull_source_sptr self) → float
-
pull_source_sptr.pc_nproduced_avg(pull_source_sptr self) → float
-
pull_source_sptr.pc_output_buffers_full_avg(pull_source_sptr self, int which) → float
pc_output_buffers_full_avg(pull_source_sptr self) -> pmt_vector_float
-
pull_source_sptr.pc_throughput_avg(pull_source_sptr self) → float
-
pull_source_sptr.pc_work_time_avg(pull_source_sptr self) → float
-
pull_source_sptr.pc_work_time_total(pull_source_sptr self) → float
-
pull_source_sptr.sample_delay(pull_source_sptr self, int which) → unsigned int
-
pull_source_sptr.set_min_noutput_items(pull_source_sptr self, int m)
-
pull_source_sptr.set_thread_priority(pull_source_sptr self, int priority) → int
-
pull_source_sptr.thread_priority(pull_source_sptr self) → int
-
gnuradio.zeromq.push_msg_sink(char * address, int timeout=100) → push_msg_sink_sptr
Sink the contents of a msg port to a ZMQ PUSH socket.
This block acts a message port receiver and writes individual messages to a ZMQ PUSH socket. The corresponding receiving ZMQ PULL socket can be either another gr-zeromq source block or a non-GNU Radio ZMQ socket.
Constructor Specific Documentation:
Return a shared_ptr to a new instance of gr::zeromq::push_msg_sink.
Parameters: |
- address – ZMQ socket address specifier
- timeout – Receive timeout in seconds, default is 100ms, 1us increments
|
-
push_msg_sink_sptr.active_thread_priority(push_msg_sink_sptr self) → int
-
push_msg_sink_sptr.declare_sample_delay(push_msg_sink_sptr self, int which, int delay)
declare_sample_delay(push_msg_sink_sptr self, unsigned int delay)
-
push_msg_sink_sptr.message_subscribers(push_msg_sink_sptr self, swig_int_ptr which_port) → swig_int_ptr
-
push_msg_sink_sptr.min_noutput_items(push_msg_sink_sptr self) → int
-
push_msg_sink_sptr.pc_input_buffers_full_avg(push_msg_sink_sptr self, int which) → float
pc_input_buffers_full_avg(push_msg_sink_sptr self) -> pmt_vector_float
-
push_msg_sink_sptr.pc_noutput_items_avg(push_msg_sink_sptr self) → float
-
push_msg_sink_sptr.pc_nproduced_avg(push_msg_sink_sptr self) → float
-
push_msg_sink_sptr.pc_output_buffers_full_avg(push_msg_sink_sptr self, int which) → float
pc_output_buffers_full_avg(push_msg_sink_sptr self) -> pmt_vector_float
-
push_msg_sink_sptr.pc_throughput_avg(push_msg_sink_sptr self) → float
-
push_msg_sink_sptr.pc_work_time_avg(push_msg_sink_sptr self) → float
-
push_msg_sink_sptr.pc_work_time_total(push_msg_sink_sptr self) → float
-
push_msg_sink_sptr.sample_delay(push_msg_sink_sptr self, int which) → unsigned int
-
push_msg_sink_sptr.set_min_noutput_items(push_msg_sink_sptr self, int m)
-
push_msg_sink_sptr.set_thread_priority(push_msg_sink_sptr self, int priority) → int
-
push_msg_sink_sptr.thread_priority(push_msg_sink_sptr self) → int
-
gnuradio.zeromq.push_sink(size_t itemsize, size_t vlen, char * address, int timeout=100, bool pass_tags=False) → push_sink_sptr
Sink the contents of a stream to a ZMQ PUSH socket.
This block acts a a streaming sink for a GNU Radio flowgraph and writes its contents to a ZMQ PUSH socket. A PUSH socket will round-robin send its messages to each connected ZMQ PULL socket, either another gr-zeromq source block or a regular, non-GNU Radio ZMQ socket.
Constructor Specific Documentation:
Return a shared_ptr to a new instance of gr::zeromq::push_sink.
Parameters: |
- itemsize – Size of a stream item in bytes.
- vlen – Vector length of the input items. Note that one vector is one item.
- address – ZMQ socket address specifier.
- timeout – Receive timeout in seconds, default is 100ms, 1us increments.
- pass_tags – Whether sink will serialize and pass tags over the link.
|
-
push_sink_sptr.active_thread_priority(push_sink_sptr self) → int
-
push_sink_sptr.declare_sample_delay(push_sink_sptr self, int which, int delay)
declare_sample_delay(push_sink_sptr self, unsigned int delay)
-
push_sink_sptr.message_subscribers(push_sink_sptr self, swig_int_ptr which_port) → swig_int_ptr
-
push_sink_sptr.min_noutput_items(push_sink_sptr self) → int
-
push_sink_sptr.pc_input_buffers_full_avg(push_sink_sptr self, int which) → float
pc_input_buffers_full_avg(push_sink_sptr self) -> pmt_vector_float
-
push_sink_sptr.pc_noutput_items_avg(push_sink_sptr self) → float
-
push_sink_sptr.pc_nproduced_avg(push_sink_sptr self) → float
-
push_sink_sptr.pc_output_buffers_full_avg(push_sink_sptr self, int which) → float
pc_output_buffers_full_avg(push_sink_sptr self) -> pmt_vector_float
-
push_sink_sptr.pc_throughput_avg(push_sink_sptr self) → float
-
push_sink_sptr.pc_work_time_avg(push_sink_sptr self) → float
-
push_sink_sptr.pc_work_time_total(push_sink_sptr self) → float
-
push_sink_sptr.sample_delay(push_sink_sptr self, int which) → unsigned int
-
push_sink_sptr.set_min_noutput_items(push_sink_sptr self, int m)
-
push_sink_sptr.set_thread_priority(push_sink_sptr self, int priority) → int
-
push_sink_sptr.thread_priority(push_sink_sptr self) → int
-
gnuradio.zeromq.rep_msg_sink(char * address, int timeout=100) → rep_msg_sink_sptr
Sink the contents of a msg port to a ZMQ REP socket.
This block acts a message port receiver and writes individual messages to a ZMQ REP socket. The corresponding receiving ZMQ REQ socket can be either another gr-zeromq source block or a non-GNU Radio ZMQ socket.
Constructor Specific Documentation:
Return a shared_ptr to a new instance of zeromq::rep_msg_sink.
Parameters: |
- address – ZMQ socket address specifier
- timeout – Receive timeout in seconds, default is 100ms, 1us increments
|
-
rep_msg_sink_sptr.active_thread_priority(rep_msg_sink_sptr self) → int
-
rep_msg_sink_sptr.declare_sample_delay(rep_msg_sink_sptr self, int which, int delay)
declare_sample_delay(rep_msg_sink_sptr self, unsigned int delay)
-
rep_msg_sink_sptr.message_subscribers(rep_msg_sink_sptr self, swig_int_ptr which_port) → swig_int_ptr
-
rep_msg_sink_sptr.min_noutput_items(rep_msg_sink_sptr self) → int
-
rep_msg_sink_sptr.pc_input_buffers_full_avg(rep_msg_sink_sptr self, int which) → float
pc_input_buffers_full_avg(rep_msg_sink_sptr self) -> pmt_vector_float
-
rep_msg_sink_sptr.pc_noutput_items_avg(rep_msg_sink_sptr self) → float
-
rep_msg_sink_sptr.pc_nproduced_avg(rep_msg_sink_sptr self) → float
-
rep_msg_sink_sptr.pc_output_buffers_full_avg(rep_msg_sink_sptr self, int which) → float
pc_output_buffers_full_avg(rep_msg_sink_sptr self) -> pmt_vector_float
-
rep_msg_sink_sptr.pc_throughput_avg(rep_msg_sink_sptr self) → float
-
rep_msg_sink_sptr.pc_work_time_avg(rep_msg_sink_sptr self) → float
-
rep_msg_sink_sptr.pc_work_time_total(rep_msg_sink_sptr self) → float
-
rep_msg_sink_sptr.sample_delay(rep_msg_sink_sptr self, int which) → unsigned int
-
rep_msg_sink_sptr.set_min_noutput_items(rep_msg_sink_sptr self, int m)
-
rep_msg_sink_sptr.set_thread_priority(rep_msg_sink_sptr self, int priority) → int
-
rep_msg_sink_sptr.thread_priority(rep_msg_sink_sptr self) → int
-
gnuradio.zeromq.rep_sink(size_t itemsize, size_t vlen, char * address, int timeout=100, bool pass_tags=False) → rep_sink_sptr
Sink the contents of a stream to a ZMQ REP socket.
This block acts a a streaming sink for a GNU Radio flowgraph and writes its contents to a ZMQ REP socket. A REP socket will only send its contents to an attached REQ socket when it requests items.
Constructor Specific Documentation:
Return a shared_ptr to a new instance of zeromq::rep_sink.
Parameters: |
- itemsize – Size of a stream item in bytes.
- vlen – Vector length of the input items. Note that one vector is one item.
- address – ZMQ socket address specifier.
- timeout – Receive timeout in seconds, default is 100ms, 1us increments.
- pass_tags – Whether sink will serialize and pass tags over the link.
|
-
rep_sink_sptr.active_thread_priority(rep_sink_sptr self) → int
-
rep_sink_sptr.declare_sample_delay(rep_sink_sptr self, int which, int delay)
declare_sample_delay(rep_sink_sptr self, unsigned int delay)
-
rep_sink_sptr.message_subscribers(rep_sink_sptr self, swig_int_ptr which_port) → swig_int_ptr
-
rep_sink_sptr.min_noutput_items(rep_sink_sptr self) → int
-
rep_sink_sptr.pc_input_buffers_full_avg(rep_sink_sptr self, int which) → float
pc_input_buffers_full_avg(rep_sink_sptr self) -> pmt_vector_float
-
rep_sink_sptr.pc_noutput_items_avg(rep_sink_sptr self) → float
-
rep_sink_sptr.pc_nproduced_avg(rep_sink_sptr self) → float
-
rep_sink_sptr.pc_output_buffers_full_avg(rep_sink_sptr self, int which) → float
pc_output_buffers_full_avg(rep_sink_sptr self) -> pmt_vector_float
-
rep_sink_sptr.pc_throughput_avg(rep_sink_sptr self) → float
-
rep_sink_sptr.pc_work_time_avg(rep_sink_sptr self) → float
-
rep_sink_sptr.pc_work_time_total(rep_sink_sptr self) → float
-
rep_sink_sptr.sample_delay(rep_sink_sptr self, int which) → unsigned int
-
rep_sink_sptr.set_min_noutput_items(rep_sink_sptr self, int m)
-
rep_sink_sptr.set_thread_priority(rep_sink_sptr self, int priority) → int
-
rep_sink_sptr.thread_priority(rep_sink_sptr self) → int
-
gnuradio.zeromq.req_msg_source(char * address, int timeout=100) → req_msg_source_sptr
Receive messages on ZMQ REQ socket output async messages.
This block will connect to a ZMQ REP socket, then resend all incoming messages as asynchronous messages.
Constructor Specific Documentation:
Return a shared_ptr to a new instance of zeromq::req_msg_source.
Parameters: |
- address – ZMQ socket address specifier
- timeout – Receive timeout in seconds, default is 100ms, 1us increments
|
-
req_msg_source_sptr.active_thread_priority(req_msg_source_sptr self) → int
-
req_msg_source_sptr.declare_sample_delay(req_msg_source_sptr self, int which, int delay)
declare_sample_delay(req_msg_source_sptr self, unsigned int delay)
-
req_msg_source_sptr.message_subscribers(req_msg_source_sptr self, swig_int_ptr which_port) → swig_int_ptr
-
req_msg_source_sptr.min_noutput_items(req_msg_source_sptr self) → int
-
req_msg_source_sptr.pc_input_buffers_full_avg(req_msg_source_sptr self, int which) → float
pc_input_buffers_full_avg(req_msg_source_sptr self) -> pmt_vector_float
-
req_msg_source_sptr.pc_noutput_items_avg(req_msg_source_sptr self) → float
-
req_msg_source_sptr.pc_nproduced_avg(req_msg_source_sptr self) → float
-
req_msg_source_sptr.pc_output_buffers_full_avg(req_msg_source_sptr self, int which) → float
pc_output_buffers_full_avg(req_msg_source_sptr self) -> pmt_vector_float
-
req_msg_source_sptr.pc_throughput_avg(req_msg_source_sptr self) → float
-
req_msg_source_sptr.pc_work_time_avg(req_msg_source_sptr self) → float
-
req_msg_source_sptr.pc_work_time_total(req_msg_source_sptr self) → float
-
req_msg_source_sptr.sample_delay(req_msg_source_sptr self, int which) → unsigned int
-
req_msg_source_sptr.set_min_noutput_items(req_msg_source_sptr self, int m)
-
req_msg_source_sptr.set_thread_priority(req_msg_source_sptr self, int priority) → int
-
req_msg_source_sptr.thread_priority(req_msg_source_sptr self) → int
-
gnuradio.zeromq.req_source(size_t itemsize, size_t vlen, char * address, int timeout=100, bool pass_tags=False) → req_source_sptr
Receive messages on ZMQ REQ socket and source stream.
This block will connect to a ZMQ REP socket, then produce all incoming messages as streaming output.
Constructor Specific Documentation:
Return a shared_ptr to a new instance of zeromq::req_source.
Parameters: |
- itemsize – Size of a stream item in bytes.
- vlen – Vector length of the input items. Note that one vector is one item.
- address – ZMQ socket address specifier.
- timeout – Receive timeout in seconds, default is 100ms, 1us increments.
- pass_tags – Whether source will look for and deserialize tags.
|
-
req_source_sptr.active_thread_priority(req_source_sptr self) → int
-
req_source_sptr.declare_sample_delay(req_source_sptr self, int which, int delay)
declare_sample_delay(req_source_sptr self, unsigned int delay)
-
req_source_sptr.message_subscribers(req_source_sptr self, swig_int_ptr which_port) → swig_int_ptr
-
req_source_sptr.min_noutput_items(req_source_sptr self) → int
-
req_source_sptr.pc_input_buffers_full_avg(req_source_sptr self, int which) → float
pc_input_buffers_full_avg(req_source_sptr self) -> pmt_vector_float
-
req_source_sptr.pc_noutput_items_avg(req_source_sptr self) → float
-
req_source_sptr.pc_nproduced_avg(req_source_sptr self) → float
-
req_source_sptr.pc_output_buffers_full_avg(req_source_sptr self, int which) → float
pc_output_buffers_full_avg(req_source_sptr self) -> pmt_vector_float
-
req_source_sptr.pc_throughput_avg(req_source_sptr self) → float
-
req_source_sptr.pc_work_time_avg(req_source_sptr self) → float
-
req_source_sptr.pc_work_time_total(req_source_sptr self) → float
-
req_source_sptr.sample_delay(req_source_sptr self, int which) → unsigned int
-
req_source_sptr.set_min_noutput_items(req_source_sptr self, int m)
-
req_source_sptr.set_thread_priority(req_source_sptr self, int priority) → int
-
req_source_sptr.thread_priority(req_source_sptr self) → int
-
gnuradio.zeromq.sub_msg_source(char * address, int timeout=100) → sub_msg_source_sptr
Receive messages on ZMQ SUB socket and output async messages.
This block will connect to a ZMQ PUB socket, then convert them to outgoing async messages
Constructor Specific Documentation:
Return a shared_ptr to a new instance of gr::zeromq::sub_msg_source.
Parameters: |
- address – ZMQ socket address specifier
- timeout – Receive timeout in seconds, default is 100ms, 1us increments
|
-
sub_msg_source_sptr.active_thread_priority(sub_msg_source_sptr self) → int
-
sub_msg_source_sptr.declare_sample_delay(sub_msg_source_sptr self, int which, int delay)
declare_sample_delay(sub_msg_source_sptr self, unsigned int delay)
-
sub_msg_source_sptr.message_subscribers(sub_msg_source_sptr self, swig_int_ptr which_port) → swig_int_ptr
-
sub_msg_source_sptr.min_noutput_items(sub_msg_source_sptr self) → int
-
sub_msg_source_sptr.pc_input_buffers_full_avg(sub_msg_source_sptr self, int which) → float
pc_input_buffers_full_avg(sub_msg_source_sptr self) -> pmt_vector_float
-
sub_msg_source_sptr.pc_noutput_items_avg(sub_msg_source_sptr self) → float
-
sub_msg_source_sptr.pc_nproduced_avg(sub_msg_source_sptr self) → float
-
sub_msg_source_sptr.pc_output_buffers_full_avg(sub_msg_source_sptr self, int which) → float
pc_output_buffers_full_avg(sub_msg_source_sptr self) -> pmt_vector_float
-
sub_msg_source_sptr.pc_throughput_avg(sub_msg_source_sptr self) → float
-
sub_msg_source_sptr.pc_work_time_avg(sub_msg_source_sptr self) → float
-
sub_msg_source_sptr.pc_work_time_total(sub_msg_source_sptr self) → float
-
sub_msg_source_sptr.sample_delay(sub_msg_source_sptr self, int which) → unsigned int
-
sub_msg_source_sptr.set_min_noutput_items(sub_msg_source_sptr self, int m)
-
sub_msg_source_sptr.set_thread_priority(sub_msg_source_sptr self, int priority) → int
-
sub_msg_source_sptr.thread_priority(sub_msg_source_sptr self) → int
-
gnuradio.zeromq.sub_source(size_t itemsize, size_t vlen, char * address, int timeout=100, bool pass_tags=False) → sub_source_sptr
Receive messages on ZMQ SUB socket and source stream.
This block will connect to a ZMQ PUB socket, then produce all incoming messages as streaming output.
Constructor Specific Documentation:
Return a shared_ptr to a new instance of gr::zeromq::sub_source.
Parameters: |
- itemsize – Size of a stream item in bytes.
- vlen – Vector length of the input items. Note that one vector is one item.
- address – ZMQ socket address specifier.
- timeout – Receive timeout in seconds, default is 100ms, 1us increments.
- pass_tags – Whether source will look for and deserialize tags.
|
-
sub_source_sptr.active_thread_priority(sub_source_sptr self) → int
-
sub_source_sptr.declare_sample_delay(sub_source_sptr self, int which, int delay)
declare_sample_delay(sub_source_sptr self, unsigned int delay)
-
sub_source_sptr.message_subscribers(sub_source_sptr self, swig_int_ptr which_port) → swig_int_ptr
-
sub_source_sptr.min_noutput_items(sub_source_sptr self) → int
-
sub_source_sptr.pc_input_buffers_full_avg(sub_source_sptr self, int which) → float
pc_input_buffers_full_avg(sub_source_sptr self) -> pmt_vector_float
-
sub_source_sptr.pc_noutput_items_avg(sub_source_sptr self) → float
-
sub_source_sptr.pc_nproduced_avg(sub_source_sptr self) → float
-
sub_source_sptr.pc_output_buffers_full_avg(sub_source_sptr self, int which) → float
pc_output_buffers_full_avg(sub_source_sptr self) -> pmt_vector_float
-
sub_source_sptr.pc_throughput_avg(sub_source_sptr self) → float
-
sub_source_sptr.pc_work_time_avg(sub_source_sptr self) → float
-
sub_source_sptr.pc_work_time_total(sub_source_sptr self) → float
-
sub_source_sptr.sample_delay(sub_source_sptr self, int which) → unsigned int
-
sub_source_sptr.set_min_noutput_items(sub_source_sptr self, int m)
-
sub_source_sptr.set_thread_priority(sub_source_sptr self, int priority) → int
-
sub_source_sptr.thread_priority(sub_source_sptr self) → int